Light Duty Vehicle Lifts

SECTION 14451

LIGHT DUTY VEHICLE LIFTS

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Rotary Lift, lifts for in-ground and surface-mounted applications, two post, four post, parallelogram and hydraulic portable lifts, vehicle alignment lifts.
This section is based on the products of Rotary Lift, which is located at:
2700 Lanier Dr.
Madison, IN 47250
Toll Free Tel: 800-640-5438
Tel: 812-273-1622
Fax: 800-578-5438
Email:request info ()
Web:
[Click Here] for additional information.
Rotary Lift, a brand of Vehicle Service Group (VSG), is a leading manufacturer of vehicle service and storage lifts. In 1925, the first automotive hydraulic lift was built by us and we've never stopped offering innovative products to our customers. With global headquarters in Madison, Indiana, VSG has business operation centers and ISO 9001-certified manufacturing facilities on three continents: North America, Europe and Asia. Our ISO9001 facilities maintain world-class quality control in every step of design, purchased components, manufacturing, and service and repair. Every lift reflects the commitment to innovation and designed to meet and exceed applicable industry and local standards.
Rotary Lift offers the industry's broadest line of surface and environmentally friendly inground lifts for both the light and heavy duty vehicle service markets. Our 85 years of experience shows that there are more Rotary Lift products used in vehicle repair shops around the world than any other brand. You can trust that every Rotary lift reflects the commitment to innovation that has made Rotary the world's most trusted lift.
With an uncompromising commitment to product quality, testing and safety, Rotary Lift's products have achieved the reputation as the world's most trusted lifts. Earning this customer trust and confidence comes from a focus on several important areas of product and support including: quality and warranty, engineering and testing, certification and safety, factory support team, a global network of sales and service professionals and the availability of genuine OE parts. For decades, Rotary has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market.
Only Rotary offers the right combination of experience, quality product selection and service you've come to expect from the world leader.
Locations: Madison, Indiana (Global Headquarters and North & South American Operations Center) Braunlingen, Germany (Europe & Africa Operations Center) Haimen, China (Asian Operations Center)

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete lift types below not applicable to your project.

A. Vehicle lifts including safety equipment, controls and accessories of the following types:

1. 7,000 lb. capacity asymmetric two post surface mounted frame contact lifts SPOA7-MP - SPOA7-MPSW series.

2. 10,000 lb. capacity asymmetric two post surface mounted frame contact lifts SPOA10 series.

3. 10,000 lb. capacity symmetric two post surface mounted frame contact lifts SPO10 series.

4. 12,000 lb. capacity symmetric two post surface mounted frame contact lifts SPO12 series.

5. 15,000 lb. / 18,000 capacity symmetric two post surface mounted frame contact lifts SPO15 - SPO18 series.

6. 8,000 lb / 10,000 lb / 12,000 lb. capacity self-contained inground two post frame contact lifts SL210-MP8 - SL210 - SL212 series.

7. 14,000 lb. four post surface mounted drive on alignment rack AR14 - ARO14 series.

8. 14,000 lb. four post surface mounted drive on general service lifts SM14 - SMO14 series.

9. 18,000 lb. four post surface mounted drive on general service lifts SM18L - SM18EL series.

10. 18,000 lb. four post surface mounted drive on alignment rack AR18L - AR18-EL series.

11. Vehicle alignment lifts.

1.2 RELATED SECTIONS

A. Section 14450 - Heavy Duty Vehicle Lifts.

B. Section 15050 - Basic Mechanical Materials and Methods: Hydraulic lines, fittings, and related accessories.

C. Section 16050 - Basic Electrical Materials and Methods: Service, circuiting, wiring, and connections for power and controls.

1.3 REFERENCES

A. ALI: Automotive Lift Institute.

B. ANSI/ALI ALCTV: Safety Requirements for the Construction, Testing, and Validation of Automotive Lifts.

C. International Standards Organization (ISO): ISO 9001 Quality management systems - Requirements.

D. Underwriters Laboratories Inc. (UL): UL201 - These requirements cover garage equipment, rated not more than 600 volts, for use in accordance with the National Electrical Code, NFPA 70.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation manual.

4. Operations manual.

5. Maintenance manual.

6. Safety manual.

C. Shop Drawings: Template drawings and load reactions for lift application.

1.5 QUALITY ASSURANCE

A. Installer Qualifications: Factory trained authorized company, company insured for completed operations of installing lift.

B. In addition to the other requirements outlined herein, the lift or lifts, shall comply with all applicable requirements of ANSI standards. "Safety Requirements for the Construction, Care and Use of Automotive Lifts" as published by the American national Standards Institute. The lift company Quality Management System shall be ISO9001 certified.

1.6 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.7 WARRANTY

A. Manufacturer's Warranty: Provide manufacturer's standard warranty for failures due to defective materials and workmanship. Manufacturer will not assume responsibility, or compensation, for unauthorized repairs or labor.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Rotary Lift, which is located at: 2700 Lanier Dr.; Madison, IN 47250; Toll Free Tel: 800-640-5438; Tel: 812-273-1622; Fax: 800-578-5438; Email:request info (); Web:

B. Substitutions: Not permitted.

** NOTE TO SPECIFIER ** Delete article below if this type of lift is not required.

2.2 7,000 LB. CAPACITY ASYMMETRIC TWO POST SURFACE MOUNTED FRAME CONTACT LIFTS SPOA7-MP - SPOA7-MPSW SERIES

A. Capacity: 7,000 lbs. (3175 kg); 3500 lbs. (1588 kg) per pad.

B. Minimum Bay Requirements:

1. Floor space 12 feet x 24 feet (3658mm - 7315 (mm).

2. Floor slab concrete 3000 psi - 4-1/4 inch (108 mm) minimum; 5 inch - 6 inch (127 mm - 152 mm).

C. Ceiling Height Requirements:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA7-MP: 11 feet 10-3/4 inches (3658 mm).

2. SPOA7-MP with extended cylinder: 12 feet 4-3/4 inches (3785 mm).

3. SPOA7-MPEH1 and SPOA7-MPSW Models: 13 feet (3962 mm).

4. SPOA7-MPEH2 and SPOA7-MPSW Models: 14 feet (4267 mm).

D. Height to Top of Overhead Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA7-MP: 11 feet 8-1/2 inches (3569 mm).

2. SPOA7-MPEH1 and SPOA7-MPSWEH1: 12 feet 8-1/2 inches (3874 mm).

3. SPOA7-MPEH2 and SPOA7-MPSWEH2: 13 feet -1/2 inches (4178 mm).

E. Floor To Overhead Switch Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA7-MP: 11 feet 2-3/4 inches (3423 mm).

2. SPOA7-MPEH1 and SPOA7-MPSWEH1 Models: 12 feet 2 inches (3708 mm).

3. SPOA7-MPEH2 and SPOA7-MPSWEH2 Models: 13 feet 2 inches (4013 mm).

F. Width Inside Columns: 107-1/4 inch (2724 mm).

G. Overall Width: 11 feet 5-3/8 inch (3489 mm).

H. Drive Through Clearance At Tires: 79 inches (2007 mm).

I. Rise:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA7-MP: 74 inches (1880 mm) from floor level to top of adapter pad.

2. Extended Rise: 77 inches (1956 mm) from floor level to top of adapter pad.

J. Finishes (Excluding Arms) - All Arms Are Yellow:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Blue, Standard RAL5005.

2. Red, RAL3002.

3. Yellow, RAL1023.

4. Gray, RAL7040.

5. Black, RAL9005.

K. SPOA7-MP and SPOA7-MPSW Series Single Point Manual Controls - Manual Lock Release Electric Power Unit, UL201 Compliant, Over Hydraulic Cylinder Drive: All models bio-fluid compatible.

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2hp 208-230V 1 phase Motor 60Hz.

2. 2hp 208-230V 1 phase Motor 50Hz.

3. 4hp 208-480V 3 phase Motor 50/60Hz.

4. 4hp 575V 3 phase Motor 60Hz.

** NOTE TO SPECIFIER ** SPOA7-MPSW Series Single Point Control. Delete if not required.

5. Shockwave Series DC Controls: System is operated by (2) group 24 car batteries charged by a 110-120V 60Hz, 3.15 amp charger. A separate circuit is not required for each Shockwave DC power unit system.

L. Arm Configurations:

1. Drive Over Pad With Adapters: Minimum Adapter Height 3 inches (76 mm) - Maximum Adapter Height 6 inches (152 mm) from floor.

M. Accessories:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Air/Electric Utility Box.

2. Tool Holder.

3. Door Defender.

4. Light Kit.

N. Lift shall be 3rd party certified by ETL testing laboratory and labeled with the ETL/Automotive Lift Institute (ALI) label that affirms the lifts meet conformance to all applicable provisions of American National Standard ANSI/ALI ALCTV and in compliance with IBC chapter 30 section 3001.2.

** NOTE TO SPECIFIER ** Delete article below if this type of lift is not required.

2.3 10,000 LB. CAPACITY ASYMMETRIC TWO POST SURFACE MOUNTED FRAME CONTACT LIFTS SPOA10

** NOTE TO SPECIFIER ** SPOA10 Series exclusive to manual controls.

A. Capacity: 10,000 lbs. (4536 kg); 2500 lbs. (1134 kg) per adapter.

B. Minimum Bay Requirements:

1. Floor space 12 feet x 24 feet (3658mm - 7315 mm).

2. Floor slab concrete 3000 psi - 4-1/4 inch (108 mm) minimum; 5 inch - 6 inch (127 mm - 152 mm).

C. Ceiling Height Requirements:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA10: 12 feet (3658 mm).

2. SPOA10 with extended cylinder: 12 feet 5 inches (3785 mm).

3. SPOA10EH1: 13 feet (3962 mm).

4. SPOA10EH2: 14 feet (4267 mm).

D. Height to Top of Overhead Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA10: 11 feet 8 inches (3556 mm).

2. SPOA10EH1: 12 feet 8 inches (3861 mm).

3. SPOA10EH2: 13 feet 8 inches (4166 mm).

E. Floor To Overhead Switch Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA10: 11 feet 2 inches (3404 mm).

2. SPOA10EH1: 12 feet 2 inches (3708 mm).

3. SPOA10EH2: 13 feet 2 inches (4013 mm).

F. Width Inside Columns: 107-1/2 inch (2727 mm).

G. Overall Width: 11 feet-5-1/2 inch (3493 mm).

H. Drive Through Clearance At Tires: 95 inches (2413 mm).

I. Rise:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPOA10 2-Stage Arm: 78 inches (1981 mm) from floor level to top of adapter fully extended.

2. Extended Rise Model 2-Stage Arm: 81 inches (2057 mm) from floor level to top of adapter fully extended.

3. SPOA10 3-Stage Arm: 73-7/8 inches (1876 mm) from floor level to top of adapter fully extended.

4. Extended Rise Model 3-Stage Arm: 76-7/8 inches (1953 mm) from floor level to top of adapter fully extended.

J. Finishes (Excluding Arms) - All Arms Are Yellow:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Blue, Standard RAL5005.

2. Red, RAL3002.

3. Yellow, RAL1023.

4. Gray, RAL7040.

5. Black, RAL9005.

K. SPOA10 Series Single Point Manual Controls - Manual Lock Release Electric Power Unit, UL201 Compliant, Over Hydraulic Cylinder Drive: All models bio-fluid compatible.

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2hp 208-230V 1 phase Motor 60Hz.

2. 2hp 208-230V 1 phase Motor 50Hz.

3. 4hp 208-480V 3 phase Motor 50/60Hz.

4. 4hp 575V 3 phase Motor 60Hz.

5. Shockwave Series DC Controls:

a. System is operated by (2) group 24 car batteries charged by a 110-120V 60Hz, 3.15 amp charger. A separate circuit is not required for each Shockwave DC power unit system.

L. Arm Configurations:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2-Stage Arms With Flip Up Adapters:

a. Front Arm: Minimum Reach 20-1/2 inches (521 mm) - Maximum Reach 40-3/4 inches (1035 mm) Minimum Adapter Height 4-3/4 inches (121 mm) - Maximum Adapter Height 10-1/4 inches (260 mm) from floor.

b. Rear Arm: Minimum Reach 40-1/4 inches (1019 mm) - Maximum Reach 61 inches (1548 mm) Minimum Adapter Height 4-3/4 inches (121 mm) - Maximum Adapter Height 10-1/4 inches (260 mm) from floor.

2. TRIO With RA Adapters:

a. Front Arm: Minimum Reach 20-1/2 inches (521 mm) - Maximum Reach 40-7/8 inches (1038 mm) Minimum Adapter Height 4 inches (102 mm) - Maximum Adapter Height 5-1/8 inches (130 mm) from floor.

b. Rear Arm: Minimum Reach 34-1/2 inches (878 mm) - Maximum Reach 58-1/4 inches (1480 mm) Minimum Adapter Height 4 inches (102 mm) - Maximum Adapter Height 5-1/8 inches (130 mm) from floor.

M. Accessories:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Extended Height GM Adapters (Flip Up Arms Only).

2. Extended Height Truck Adapters (Flip Up Arms Only).

3. 1/2 Inch Pad Adapter (Flip Up Arms Only).

4. 1 Inch Pad Adapter (Flip Up Arms Only).

5. 2-1/2 Inch Pad Adapter (Flip Up Arms Only).

6. Thread-Up Frame Engaging Adapter.

7. Stackable Extensions.

8. Air/Electric Utility Box.

9. Tool Holder.

10. Door Defender.

11. Light Kit.

** NOTE TO SPECIFIER ** Delete article below if this type of lift is not required.

2.4 10,000 LB. CAPACITY SYMMETRIC TWO POST SURFACE MOUNTED FRAME CONTACT LIFTS SPO10

** NOTE TO SPECIFIER ** SPO10 Series exclusive to manual controls.

A. Capacity: 10,000 lbs. (4536 kg); 2500 lbs. (1134 kg) per adapter.

B. Minimum Bay Requirements:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Floor space 12 feet x 24 feet (3658mm - 7315 mm).

2. Floor slab concrete 3000 psi - 4-1/4 inch (108 mm) minimum; 5 inch - 6 inch (127 mm - 152 mm).

C. Ceiling Height Requirements:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPO10: 12 feet (3658 mm).

2. SPO10 with extended cylinder: 12 feet 5 inches (3785 mm).

3. SPO10EH1: 12 feet 9 inches (3962 mm).

4. SPO10EH2: 13 feet 9 inches (4267 mm).

5. SPO10EH4: 15 feet 9 inches (4572 mm).

D. Height to Top of Overhead Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPO10: 11 feet 8 inches (3556 mm).

2. SPO10EH1: 12 feet 8 inches (3861 mm).

3. SPO10EH2: 13 feet 8 inches (4166 mm).

4. SPO10EH4: 15 feet 8 inches (4775 mm).

E. Floor To Overhead Switch Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPO10: 11 feet 2 3/4 inches (3423 mm).

2. SPO10EH1: 12 feet 2 inches (3708 mm).

3. SPO10EH2: 13 feet 2 inches (4013 mm).

4. SPO10EH4: 14 feet 2 inches (4318 mm).

F. Width Inside Columns: 114 1/2 inch (2727 mm).

G. Overall Width: 11 feet-5-1/2 inch (3493 mm).

H. Drive Through Clearance At Tires: 102 1/2 inches (2603 mm).

I. Rise:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPO10 2-Stage Arm: 78 1/4 inches (1981 mm) from floor level to top of adapter fully extended.

2. Extended Rise Model 2-Stage Arm: 81 1/4 inches (2064 mm) from floor level to top of adapter fully extended.

3. SPO10 3-Stage Arm: 80-1/4 inches (2038 mm) from floor level to top of adapter fully extended.

4. Extended Rise Model 3-Stage Arm: 83-1/4 inches (2115 mm) from floor level to top of adapter fully extended.

J. Finishes (Excluding Arms) - All Arms Are Yellow:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Blue, Standard RAL5005.

2. Red, RAL3002.

3. Yellow, RAL1023.

4. Gray, RAL7040.

5. Black, RAL9005.

K. SPO10 Series Single Point Manual Controls - Manual Lock Release Electric Power Unit, UL201 Compliant, Over Hydraulic Cylinder Drive: All models bio-fluid compatible.

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2hp 208-230V 1 phase Motor 60Hz.

2. 2hp 208-230V 1 phase Motor 50Hz.

3. 4hp 208-480V 3 phase Motor 50/60Hz.

4. 4hp 575V 3 phase Motor 60Hz.

L. Arm Configurations:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2-Stage Arms With Flip Up Adapters:

a. Front and Rear Arms: Minimum Reach 31 inches (787 mm) - Maximum Reach 54 inches (1372 mm) Minimum Adapter Height 4-3/4 inches (121 mm) - Maximum Adapter Height 10-1/4 inches (260 mm) from floor.

2. 3-Stage Arms With RA Adapters:

a. Front and Rear Arms: Minimum Reach 27-1/2 inches (696 mm) - Maximum Reach 59 inches (1497 mm) Minimum Adapter Height 4-3/4 inches (121 mm) - Maximum Adapter Height 12-1/4 inches (311 mm) from floor.

M. Accessories:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Extended Height GM Adapters (Flip Up Arms Only).

2. Extended Height Truck Adapters (Flip Up Arms Only).

3. 1/2 Inch Pad Adapter (Flip Up Arms Only).

4. 1 Inch Pad Adapter (Flip Up Arms Only).

5. 2-1/2 Inch Pad Adapter (Flip Up Arms Only).

6. Thread-Up Frame Engaging Adapter.

7. Stackable Extensions.

8. Air/Electric Utility Box.

9. Tool Holder.

10. Door Defender.

11. Light Kit.

** NOTE TO SPECIFIER ** Delete article below if this type of lift is not required.

2.5 12,000 LB. CAPACITY SYMMETRIC TWO POST SURFACE MOUNTED FRAME CONTACT LIFTS SPO12

** NOTE TO SPECIFIER ** SPO12 Series exclusive to manual controls. Sprinter arm configurations are designed for Sprinter vans and will de-rate the capacity of this series lift to 9,000 lbs.

A. Capacity:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. SPO12: 12,000 lbs. (5443 kg); 3000 lbs. (1160 kg) per adapter.

2. SPO12 With Sprinter Arms: 9,000 lbs. (4082 kg); 2250 lbs. (1021 kg) per adapter.

B. Minimum Bay Requirements:

1. Floor space 12 feet x 26 feet (3657mm x 7925 mm).

2. Floor slab concrete 3000 psi - 4-1/4 inch (108 mm) minimum; 5 inch - 6 inch (127 mm - 152 mm).

C. Ceiling Height Requirements:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Standard Model: 13 feet 9 inches (4191 mm).

2. Standard Model Low Ceiling Setting: 11 feet 9 inches (3581 mm).

3. SPO12EH1: 14 feet 9 inches (4496 mm).

4. SPO12EH2: 15 feet 9 inches (4801 mm).

5. Hummer Model: 14 feet 1/2 inches (4280 mm).

6. Hummer Model Extended Height: 15 feet 1/2 inches (4585 mm).

D. Height to Top of Overhead Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Standard Model: 13 feet 8 inches (4166 mm).

2. Standard Model Low Ceiling Setting: 11 feet 8 inches (3556 mm).

3. SPO12EH1 - : 14 feet 8 inches (4470 mm).

4. SPO12EH2 - : 15 feet 8 inches (4775 mm).

5. Hummer Model: 13 feet 11-1/2 inches (4255 mm).

6. Hummer Model Extended Height: 14 feet 11-1/2 inches (4559 mm).

E. Floor To Overhead Switch Bar:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Standard Model: 13 feet 4 inches (4064 mm).

2. Standard Model Low Ceiling Setting: 11 feet 4 inches (3454 mm).

3. SPO12EH1 - : 14 feet 4 inches (4369 mm).

4. SPO12EH2 - : 15 feet 4 inches (4674 mm).

5. Hummer Model: 13 feet 7-1/2 inches (4153 mm).

6. Hummer Model Extended Height: 14 feet 7-1/2 inches (4458 mm).

F. Width Inside Columns: 113-3/8 inch (2880 mm).

G. Overall Width: 11 feet-5-5/8 inch (3496 mm).

H. Drive Through Clearance At Tires: 102-3/8 inches (2600 mm).

I. Rise:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Standard Model 2-Stage Arm: 81 inches (2057 mm) from floor level to top of adapter fully extended.

2. Extended Rise Model 2-Stage Arm: 84 inches (2134 mm) from floor level to top of adapter fully extended.

3. (T Series) Model 3-Stage Arm: 80-1/4 inches (2038 mm) from floor level to top of adapter fully extended.

4. (T Series) Extended Rise Model 3-Stage Arm: 83-1/4 inches (2115 mm) from floor level to top of adapter fully extended.

5. (Sprinter) Model 3-Stage Arm: 73-1/2 inches (1867 mm) from floor level to top of adapter fully extended.

6. (Sprinter) Extended Rise Model 3-Stage Arm: 76-1/2 inches (1943 mm) from floor level to top of adapter fully extended.

J. Finishes (Excluding Arms) - All Arms Are Yellow:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. Blue, Standard RAL5005.

2. Red, RAL3002.

3. Yellow, RAL1023.

4. Gray, RAL7040.

5. Black, RAL9005.

K. SPO12 Series Single Point Manual Controls - Manual Lock Release Electric Power Unit, UL201 Compliant, Over Hydraulic Cylinder Drive: All models bio-fluid compatible.

** NOTE TO SPECIFIER ** Delete items below not applicable to project.

1. 2hp 208-230V 1 phase Motor 60Hz.

2. 2hp 208-230V 1 phase Motor 50Hz.

3. 4hp 208-480V 3 phase Motor 50/60Hz.

4. 4hp 575V 3 phase Motor 60Hz.

L. Arm Configurations:

** NOTE TO SPECIFIER ** Delete items below not applicable to project.