8413 - PUMPS FOR LIQUIDS; W/N FTTED WITH MEASURING DEVICE; LIQUID ELEVATORS
8413 / pumps for liquids, liquid elevators, parts thereof841311 / Pumps for Dispensing Fuel or Lubricants
841319 / Other Pumps for Liquids, With a Measuring Device
841320 / Hand Pumps for Liquids
841330 / Fuel, Lubricating or Cooling Medium Pumps
841340 / Concrete Pumps
841350 / Other Reciprocating Positive Displacement Pumps
841360 / Other Positive Rotary Displacement Pumps
841370 / Other Centrifugal Pumps
841381 / Other Pumps for Liquids
841382 / Liquid Elevators
841391 / Parts of Pumps for Liquids
841392 / Parts of Liquid Elevators
Indian Standards
IS 1710 : 1989 / Specification for Pumps - Vertical Turbine Mixed and Axial Flow, for Clear Cold Water / ActiveIS 3033 : 1965 / Accuracy requirements for dispensing pump used in petroleum trade / Active
IS 4111 : Part 4 : 1968 / Code of Practice for Ancillary Structures in Sewerage System - Part IV : Pumping Stations and Pumping Mains (Rising mains) / Active
IS 5600 : 2002 / Pumps - Sewage and Drainage - Specification / Active
IS 5639 : 1970 / Specification for Pumps Handling Chemicals and Corrosive Liquids / Active
IS 5659 : 1970 / Specification for Pumps for Process Water / Active
IS 6070 : 1983 / Code of practice for selection, operation and maintenance of trailer fire pumps, portable pumps, water tenders and motor fire engines / Active
IS 6536 : 1972 / Pumps for handling volatile liquids / Active
IS 6595 : Part 1 : 2002 / Horizontal Centrifugal Pumps for Clear, Cold Water - Specification - Part 1 : Agricultural and Rural Water Supply Purposes / Active
IS 6595 : Part 2 : 1993 / Horizontal centrifugal pumps for clear, cold water: Part 2 General purposes other than agricultural and rural water supply - Specification / Active
IS 6849 : Part 1 : 1999 / Positive Displacement Vacuum Pumps - Measurement of Performance Characteristics - Part 1 : Measurement of Volume Rate of Flow (Pumping Speed) / Active
IS 8034 : 2002 / Submersible Pumpsets - Specification / Active
IS 8035 : 1999 / Handpump - Shallow Well - Specification / Active
IS 8243 : Part 1 : 1999 / Vapour Vacuum Pumps - Measurement of Performance Characteristics - Part 1 : Measurement of Volume Rate of Flow (Pumping Speed) / Active
IS 8243 : Part 2 : 1993 / Vapour vacuum pumps - Methods of measurement of performance characteristics Part 2 Measurement of critical backing pressure / Active
IS 8418 : 1999 / Specification for Horizontal Centrifugal Self-Priming Pumps / Active
IS 8472 : 1998 / Pumps - Regenerative or clear, cold water - Specification / Active
IS 9079 : 2002 / Electric Monoset Pumps for Clear, Cold Water for Agricultural and Water Supply Purposes - Specification / Active
IS 9137 : 1978 / Code for acceptance test for centrifugal, mixed flow and axial pumps - Class C / Active
IS 10069 : 1992 / Hydraulic fluid power - Positive displacement pumps, motors and integral tranmissions - Determination of steady-state performance / Active
IS 10129 : 2004 / Hydraulic Fluid Power - Dimensions and Identification Code for Mounting Flanges and Shaft Ends of Displacement Pumps and Motors / Active
IS 11147 : 1984 / Recommendations for parameter definitions and letter symbols for hydraulic fluid power pumps, motors and integral transmissions / Active
IS 11346 : 2002 / Tests for Agricultural and Water Supply Pumps - Code of Acceptance / Active
IS 14106 : 1996 / Direct action handpump - Specification / Active
IS 14220 : 1994 / Openwell Submersible Pumpsets - Specification / Active
IS/IEC 41 : 1991 / Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump Turbines / Active
IS 15500 : Parts 1 to 8 : 2004 / Deepwell Handpumps, Components and Special Tools - Specification / Active
IS 14848 : 2000 / Hydraulic Fluid Power - Pumps and Motors - Geometric Displacements / Active
Standards
ANSI/API RP-11S1-1998
Electrical Submersible Pump Teardown Report
This recommended practice covers a
recommended electric submersible pump
teardown report form.
ASME B73.1M-2001
Horizontal End Suction Centrifugal Pumps for Chemical Process, Specifications for
Establishes requirements for centrifugal pumps
of horizontal, end suction single stage,
centerline discharge design.This Standard
establishes requirements for centrifugal pumps
of horizontal, end suction single stage,
centerline discharge design. This standard was
listed for public review in the 3/9/2001 issue of
Standards Action. It is being resubmitted due
to substantive changes to the text.
ASME B73.2M-2003
Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for
Covers motor driven centrifugal pumps of
vertical shaft, single stage design with suction
and discharge nozzles in line. It includes
dimensional interchangeability requirements
and certain design features to facilitate
installation and maintenance. It is the intent of
this Standard that pumps of the same standard
dimension designation, from all sources of
supply, shall be interchangeable with respect to
mounting dimensions and size and location of
suction and discharge nozzles
ASME B73.5M-1995 (R2001)
Specification for Thermoplastic and Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps for Chemical Process
Covers contrifugal pumps of horizontal,
end-suction single-stage, centerline discharge
design, the components of which are made of
thermoplastic and thermoset polymer materials
either reinforced or nonreinforced. It includes
dimensional interchangeability requirements
and certain design features to facilitate
installation and maintenance.
ANSI/HI 1.1 - 1.2-2000
Centrifugal Pumps – Nomenclature, Definitions, Application and Operation
Covers centrifugal and regenerative turbine
pumps of all industrial types except vertical
multistage diffuser types
ANSI/HI 1.3-2000
Centrifugal Pumps - Horizontal Baseplate Design
Covers centrifugal and regenerative turbine
pumps of all industrial types except vertical
multistage diffuser types. It includes design and
application.
ANSI/HI 1.4-2000
Centrifugal Pumps – Nomenclature, Definitions, Application and Operation
ANSI/HI 1.6-2000
Centrifugal Pump Test
Describes centrifugal, sealless centrifugal, and
regenerative turbine pumps of all industrial
types, except vertical multistage diffuser type
and submersible pumps. It includes detailed
procedures on the setup and conduct of
hydrostatic and performance tests of such
pumps. Changes made since last publication
include the following: (a) Section 1.6.5.3 - add
explanation for the use of level "A" and "B", (b)
Section 1.6.7 - mechanical test - new, and (c)
Editorial changes to show metric units first.
ANSI/HI 12.1-12.6-2005
Centrifugal Slurry Pumps For Nomenclature Definitions, Applications and Operation-2005
The Slurry Pump Committee will limit its activity
to the above matters to rotodynamic pumps
that handle abrasive slurries. Excluded are
applications for wastewater pump.
UL 778-2006
Motor Operated Water Pumps
Propose the addition of requirements for Class
F and Class H Motor Insulation Systems in UL
778.
International Standards
ISO/TC 115/SC 1
Rotary positive displacement pumps – Technical RequirementsISO 14847:1999
Seal-less rotodynamic pumps - Class II – SpecificationISO 15783:2002
Reciprocating positive displacement pumps and pumpunits - Technical requirementsISO 16330:2003
Manually operated pumps for drinking water – Selectionand acceptance - Part 1: Southeast Asia
ISO 17613-1:2006
End-suction centrifugal pumps (rating 16 bar) -Designation, nominal duty point and dimensions
ISO 2858:1975
End-suction centrifugal pumps - Dimensions of cavitiesfor mechanical seals and for soft packing
ISO 3069:2000
Technical specifications for centrifugal pumps - Class II
ISO 5199:2002
Technical specifications for centrifugal pumps - Class I
ISO 9905:1994
Corrigendum
ISO 9905:1994/Cor 1:2005
Technical specifications for centrifugal pumps - Class III
ISO 9908:1993
Federal Mandate (pumps)
Office of Energy Efficiency & Renewable Energy Mandate for pumps
Test Procedures, Certification & Enforcement Requirements for Plumbing Products
Water Well Pumps
– Construction, Installation, Repair & Maintenance --- State of New York
Pumps for Dispensing Fuel or Lubricants
Additional requirements for 841311-Pumps for Dispensing Fuel or Lubricants
Labeling Requirements for Diesel Pumps (US Environ mental Protection Agency)
Separate Requirements for the State of California for the same: