Important Rules

Rider’s Numbers

Each rider absolutely must have a clearly visible rider number. If you do not have leathers (which is most highly recommended and preferred), You must wear a race bib/vest with your number both legibly and prominently observable on the back. You can contact us for information and referrals as to where to obtain one.

Shawn McConnell can make one, kiwi covers and NJK leathers also make them.

Warning: It is your responsibility to make sure your number is clear and legible….if the scorekeepers are unable to read your number easily…you will not be scored.

If you do not have a speedway rider number, or if you wish to make a change please contact Ryan Evans at 626-643-7598.

Fuel

Methanol is the only fuel that will allowed at Inland Motorsport Speedway ! Absolutely NO nitro or power producing additives may be used. Fuel can and will be subject to random checks by track officials.

Pit Areas

  • Read and know your rulebook
  • No pit racers! Bikes are to be warmed up on the stand. No clutch starts, burn outs, or pit racing will be tolerated.
  • Do Not drain or throw away used motor oil in the pits (take it home- both Kragen and AutoZone will take it). Any rider or mechanic found to be dumping oil will be suspended from competition and forfeit that nights winnings.
  • Fuel must be in OSHA approved safety can.
  • No compressed air bottles allowed in the pit area
  • No dogs, kids, or girlfriends/boyfriends allowed in the pit area. Only riders and mechanics who are signed-in for that night’s program will be admitted.
  • Absolutely NO alcoholic beverages permitted in the pit area–period!
  • Closed toe shoes must be worn at all times.
  • All mechanics must wear white pants or pit uniforms at all times. NO blue jeans.

Kill Switch

The ignition switch must interrupt the primary circuit,and must be wired for both the supply and return of current (2 wires, 1 to ground). Switch must be operated by a non-elastic string of adequate length and thickness. This string cannot be attached around the rider’s wrist. We suggest that you attach it to the tab of your sleeve zipper with a small clip.

Mufflers

A muffler must be used at all times. Mufflers include: Bills, Jawa, Cody, King, Dominator, Power Pros, and Polito Designs.

Tires

Approved 3.50 x 19 tires may be used or a 22” speedway tire. A maximum of 1 new tire edge for scratch racing and 1 new tire edge for handicap racing will be allowed.

Souvenir Items at Inland Motorsport Speedway

Inland Motorsport Speedway has an exclusive agreement to sell souvenir items. This means T-shirts, sweatshirts, hats, pins, and all other souvenir items. If you have a merchandizing idea (or want to sell your own shirts, etc) please contact us.

Protective Gear

As a rider, you will be required to wear approved racing gear -leathers preferred (if you absolutely must wear motocross gear you MUST wear under armor and racer bib/vest), helmet, goggles, boots, and gloves. You must also wear a steel shoe on your left foot.

Warning: This will be the last year motocross gear will be allowed….as of opening night 2011 speedway riders must wear speedway leathers, kevlars, or nylons only! If you have questions please call.