/
DFD/ADFT & CD
GMT - T

Public Examination
March - 2012
GMT & Embroidery Techniques
Time : 3 hours Maximum Marks :100


I .Choose the best answer: 15x1=15
1. Sewing usually threads of ____ are used.
a) 40-80 number b) 60-80 number c) 30-80 number.
2. The standard length of the thread is ____.
a) 30-40cm b) 35-40 cm c) 30-35 cm.
3. Basic Hand stitches (Temporary) is _____.
a) Diagonal stitch b) Fine stitch c) Stem stitch
4. ____ is used on all types of garment.
a) Running b) Hemming c) Fine
5. Running stitch can be used in filling the ____.
a) Motives b) Colours c) Designs
6. The complete sewing machine without cabinet or stand.
a) Arm b) Bed c) Head.
7. The ____ must be wound evenly to work properly.
a) Bobbin case b) Winding c) Bobbin.
8. This press contain place for storing water.
a) Automatic electric press b) Automatic stem press c) Laundry press
9. Sleeve Board is a _____ shape.
a ) Sleeve b) Round c) Curve
10. Never sprinkle water on any type of ____ garment.
a) Cotton b) Silk c) Jute
1. Steam press has been made only for pressing on a ___ garments.
a) Woollen b) Polyester c) Silk
12. _____ fabric may be kept into water for 12 to 24 hours.
a) Cotton b) Silk c) Jute.
13. _____ fabrics like Nylon, viscose acetate etc.
a) Natural b) Chemical c) None
14. Linen is shrink ____ cm per metre.
a) 2 to 7 b) 5 to 11 c) 5 to 10
15. Patterns should be according to _____.
a) Pattern making b) Draping c) Measurements.


II. Fill in the blanks: 15x1=15
1. Needles used for hand work are available in ___ numbers.
2. Sewing machines are basically ___ & ___ machines.
3. Back stitches look like a ___ stitch.
4. ____ is always done on the wrong side of the garment.
5. _____ is another version of the blankestitch which is tightly weaved.
6. While passing the thread through any stitch without taking cloth is called ____.
7. _____ is like a tiny chain stitch which is closed after every step.
8. _____ is semi circular discs with highly polished surface and hole to allow needle to pass through it.
9. Pressing table should be ___ high, ___ wide & ____ feet.
10. _____ press the stitching line, taking care not to press beyond the actual dart point.
11. Nylon, tericott, satin, crape etc are such a ____ fabrics.
12. Silk is of two kinds ___ and ___.
13. Find out the length of the piece cloth length according to ___.
14. Stitches or to join the two piece is ____.
15. The extension of skirt is called ____.


III. Answer all questions: 10x3=30
1. Which numbers of needles are used for hand work?
2. Draw any four Tools & Equipments used in Hand stitching?
3. Explain any three Basic hand stitches [Permanent]?
4. What are the stitches are used in basic Hand stitches [Decorative]?
5. Explain about Threading?
6. Write short notes on Oiling?
7. What are the tools used for Pressing?
8. Why a garment is pressed while being stitched an there after?
9. Write Ratio of shrinking on cotton, linen, woolen & duplicate silk?
10. Which things are to be kept into mind before stitching a cut-cloth?


iV. Answer any eight questions: 8x5=40
1. Relate Needle, Thread & Cloth and enumerate their numbers & types.
2. Explain the Basic Hand Stitches [Permanent] with diagram
3. Explain about the parts of the Sewing Machine?
4. Write short notes on Looping?
5. Describe about Pressing Tools & Equipments?
6. Explain in Methods of Pressing?
7. Explain in Methods of shrinking:
a) Cotton b) Woollen c) Linen d) Denim
8. Explain in: a) Placket b) Grain Line c) Selvedge d) Pleats e) Seam allowance
9. Describe in any Five Types of Seams?
10. Explain about in Neck Line finishing with Facing?