1

Bosch Security Systems, Inc.September 2011

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: + 1 800 289 0096

Fax: +1 585 223 9180

Product Guide Specification

SECTION 28 23 29

VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS

BOSCH MIC 400 INFRAREDFULLY-FUNCTIONAL PTZ CAMERA

PART 1– GENERAL

1.1SUMMARY

  1. Section Includes
  2. Video Surveillance Remote Devices
  1. Related Sections
  2. Section [28 23 13 – Video Surveillance Control and Management Systems].
  3. Section [28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces].
  4. Section [28 23 19 – Digital Video Recorders and Analog Recording Devices].
  5. Section [28 23 23 – Video Surveillance Systems Infrastructure].

**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.

1.2REFERENCES

  1. National Electrical Manufacturers Association
  2. Environmentally rated to NEMA 4X
  1. International Electrotechnical Commission (IEC)
  2. IEC 60529 Degrees of protection provided by enclosures (IP Code).
  3. Rated to IP68
  4. Illuminators rated to IP66
  1. International Organization for Standardization (ISO)
  2. 9001 – Quality System.
  1. Federal Communications Commission (FCC) (
  2. Complies with FCC standards.
  1. American National Standards Institute (ANSI) (
  2. ANSI C63.4 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.
  1. Australia and New Zealand Standards
  2. AS/NZS 3548 Limits and methods of measurement of radio disturbance characteristics of information technology equipment.
  1. European Norm (CE)
  2. Complies with CE standards.
  1. Restriction of Hazardous Substances Directive (ROHS)
  2. Complies with ROHS standards.
  1. Canadian Standards Association (CSA)
  2. CAN/CSA E60950-1 Information Technology Equipment Safety.
  3. European Norm
  4. EN 50121-4 Railway Applications - Electromagnetic Compatibility - Part 4: Emission and Immunity of the Signaling and Telecommunications Apparatus.
  5. EN 50130-4 Alarm Systems - Electromagnetic Compatibility - Product Family Standard: Immunity Requirements For Components Of Fire, Intruder And Social Alarm Systems.
  6. EN 55022 class A (CE) – Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement for Emission.
  7. EN 55024Information Technology Equipment (CE) – Immunity Characteristics – Limits and Methods of Measurement.
  8. EN 60950 (CE) – Information Technology Equipment - Safety.
  9. EN 61000-3-2 (CE) Electromagnetic Compatibility – Limits for Harmonic Current Emissions.
  10. EN 61000-3-3 (CE) Electromagnetic Compatibility – Limits – Limitation of Voltage Changes, Voltage Fluctuations and Limitation of Voltage.
  11. International Electrotechnical Commission (IEC)
  12. IEC 60529 Degrees of protection provided by enclosures (IP Code).
  13. IEC 60950 Information Technology Equipment – Safety.
  1. Institute of Electrical and Electronics Engineers, Inc. (IEEE) (
  2. IEEE 802.3af Power Over Ethernet.
  1. Underwriters Laboratories, Inc. (UL) (
  2. UL 50 Enclosures for Electrical Equipment.
  3. UL 2043 Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-Handling Spaces.
  4. UL 60950-1 Information Technology Equipment - Safety.

1.3DEFINITIONS

  1. IR Illuminator: a light source working in the infrared frequency range is called an infrared illuminator.
  1. Automatic Gain Control (AGC): a process by which gain is automatically adjusted as a function of input or other specified parameter.
  1. Sensitivity: refers to the minimum level of light the CCD chip needs to generate an acceptable video picture, and is measured in lux.
  1. Shutter Speed: speed at which the CCD chip can read out the charge. Using either dipswitches or a surveillance camera’s menu (if one has been built in), the default setting of 1/50 sec (PAL) or 1/60 sec (NTSC) can be increased up to 1/100,000.

1.4SYSTEM DESCRIPTION

  1. Video Surveillance Remote Devices
  2. Dome Color CCD camera
  1. Performance Requirements
  2. A fully-functional infrared Pan/Tilt/Zoom camera.
  3. Have a choice between an 18x true day/night or a 26x true day/night camera.
  4. Provide 24 hour security with detail images – day or night.
  5. Possess built-in twin infrared illuminators.
  6. Classed as vandal resistant and able to withstand hurricane force wind conditions (winds above 120 mph).
  7. Ability to mount the unit upright, inverted, or canted at 45°.

1.5SUBMITTALS

  1. Submit under provisions of Section [01 33 00.]
  1. Product Data:
  2. Manufacturer’s data, user and installation manuals for all equipment and software programs including computer equipment and other equipment required for complete video management system.
  1. Shop Drawings; include
  2. System device locations on architectural floor plans.
  3. Full Schematic of system, including wiring information for all devices.
  1. Closeout Submittals
  2. User manual.
  3. Parts list.
  4. System device locations on architectural floor plans.
  5. Wiring and connection diagram.
  6. Maintenance requirements.

1.6QUALITY ASSURANCE

  1. Manufacturer:
  2. Minimum of [10] years experience in manufacture and design Video Surveillance Devices.
  3. Manufacturer’s quality system: Registered to ISO 9001 Quality Standard.
  1. Video Surveillance System
  2. Listed by UL,EN,and the FCC specifically for the required loads. Provide evidence of compliance upon request.
  1. Installer:
  2. Minimum of [5] years experience installing Video Surveillance System.

1.7DELIVERY, STORAGE AND HANDLING

  1. Comply with requirements of Section 01 60 00.
  1. Deliver materials in manufacture’s original, unopened, undamaged containers; and unharmed original identification labels.
  1. Protect store materials from environmental and temperature conditions following manufacturer’s instructions.
  1. Handle and operate products and systems according to manufacturer’s instructions.
  1. Bosch provides off-the-shelf availability for our top selling products and same-day or 24-hour shipping.

1.8WARRANTY

  1. Provide manufacturer’s warranty covering 3 yearsfor replacement and repair of defective equipment.

1.9MAINTENANCE

  1. Make ordering of new equipment for expansions, replacements, and spare parts available to dealers and end users.
  1. Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and e-mail.

PART 2– PRODUCTS

2.1MANUFACTURERS

  1. Acceptable Manufacturer:

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 1450, USA

Phone: + 1 800 289 0096

Fax: + 1 585 223 9180

  1. Substitutions: [Not permitted.] [Under provisions of Division 1.]
  2. [All proposed substitutions must be approved by the Architect or Engineer professional.]
  3. [Proposed substitutions must provide a line-by-line compliance documentation.]

**********Specifier’s note: Select Camera System Series based on project requirement. Bosch MIC1-400 InfraredPTZ Camera comes with either an 18x Day/Night camera or a 36x Day/Night camera.

2.2BOSCH MIC1-400INFRAREDPTZ [18x DAY/NIGHT] [36x DAY/NIGHT] CAMERA SYSTEM

  1. General Characteristics:
  2. The unit shall feature an optically perfect, flat viewing window.
  3. The unit shall be supplied with an attached 4-inch PCD base (supplied with unit) with pre-drilled holes.
  4. The unit shall be capable of full operation at a maximum composite cable length of 25 meters between the PTZ camera head and the power supply.
  5. Video, power, and telemetry shall be supplied to the unit through [Bosch Security Systems’] [Forward Vision’s] multi-connector via a single cable.
  1. The High-speed Pan/Tilt drive shall meet or exceed the following design and performance specifications:
  2. precision, brushless motor technology.
  3. a drive speed range from 0.2° per second to 90° per second.
  4. capable of 360° continuous rotation pan and 186.6° tilt.
  5. utilize resolver positioning technology.
  6. have a pan and tilt position accuracy of ±0.56° typical.
  1. The Infrared Illuminators shall:
  2. be provided by Bosch Security Systems, Inc.
  3. be provided with twin illuminators, each with seven (7) surface mounted LEDs.
  4. be constructed from case aluminum with acrylic front window.
  5. emit at a 30° beam angle (each infrared illuminator).
  6. illuminate to a minimum distance of 55 meters.
  7. emit at a wavelength of 850 nm.
  8. be mounted to the camera tilt center for directional illumination.
  9. contain Black Diamond™ technology for even scene illumination.

**********Specifier’s note: Bosch Security Systems offers two camera modules with Bosch MIC400 Infrared PTZ Camera System. Select camera module based on project requirement.

  1. 18x Day/Night Camera
  2. A 1/4-inch EXview™ CCD true day/night camera capable of producing resolution of [470 TVL (NTSC) [460 TVL (PAL)] horizontal TV lines.
  3. Switch from day mode (color) to night mode (monochrome) via a photocell integrated into the PTZ camera head that can be set to user-selectable levels or via a remote keyboard.
  4. Selectable on/off Backlight Compensation (BLC).
  5. Feature an automatic mechanical IR cut-filter.
  6. Use Internal/External (V-Lock) synchronization.
  7. Have 16 steps aperture control.
  8. A lens that performs to F = 4.1 mm (WIDE) to 73.8 mm (TELE), F1.4 to F3.0.
  9. Have up to 10 selectable settings that can be mapped to a preset on the remote keyboard, including shutter speed and color control for ANPR applications.
  10. Technical Requirements:
  11. Zoom: 18x optical zoom with 12x digital zoom
  12. Minimum Illumination sensitivity:

1)0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)

2)0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)

3)0.01 lux or less (F1.4, 1/4s NTSC, 1/3s PAL, ICRON)

  1. Angle of View: 48° (WIDE end) to 2.8° (TELE end)
  2. Shutter Speed: 1/1 to 1/10,000s (22 steps), NTSC/PAL
  3. Automatic Gain Control (AGC): -3 to -28 db, in 2 db steps
  4. Signal to Noise Ration: > 50 db
  1. 36x Day/Night Camera
  2. A 1/4-inch EXview™ CCD true day/night camera capable of producing resolution of [470 TVL (NTSC) [460 TVL (PAL)] horizontal TV lines.
  3. Switch from day mode (color) to night mode (monochrome) via a remote keyboard.
  4. Selectable on/off Backlight Compensation (BLC).
  5. Feature an automatic mechanical IR cut-filter.
  6. Use Internal/External (V-Lock) synchronization.
  7. Have 16 steps aperture control.
  8. A lens that performs to F = 3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to F4.5.
  9. Have up to 10 selectable settings that can be mapped to a preset on the remote keyboard, including shutter speed and color control for ANPR applications.
  10. Technical Requirements:
  11. Zoom: 36x optical zoom with 12x digital zoom
  12. Minimum Illumination sensitivity:

1)0.4 lux (1/60s NTSC, 1/50s PAL)

2)0.1 lux (1/4s NTSC, 1/3s PAL)

3)0.01 lux or less (1/4s NTSC, 1/3s PAL, ICRON)

  1. Angle of View: 57.8° (WIDE end) to 1.7° (TELE end)
  2. Shutter Speed:

1)1/4 to 1/10,000s (20 steps), NTSC

2)1/3 to 1/10,000s (20 steps) PAL

  1. Automatic Gain Control (AGC): -3 to -28 db, in 2 db steps
  2. Signal to Noise Ratio: > 50 db
  1. Software Specifications
  2. Unit shall be compatible with these protocols, other than Bosch’s proprietary software, programmed prior to leaving the factory:
  3. American Dynamics
  4. Ernitec
  5. Kalatel
  6. Molynx
  7. Panasonic
  8. Pelco P and Pelco D
  9. VCL
  10. Vicon
  1. Operational Design and Performance
  2. Telemetry Presets: 64
  3. Preset Titles: 20 characters for each preset
  4. Tours: 6 tours, each with 32 preset positions, including a random tour
  5. Sector Titles: 64, each with 20 characters
  6. Ability to select a home position
  1. Electrical:
  2. Camera unit shall be fitted with control PCB’s including a control processor, voltage regulator, brushless motor drives, and connectivity of ancillary items such as heaters, infrared illuminations, and speakers.
  3. Power Consumption (standard camera with IR lamps): no more than 50 W
  4. Rated Voltage:15 VAC/18 VDC, from an input voltage
  5. Input Voltage: 12 VDC, 115 VAC, or 240 VAC
  6. Power SupplyBosch’s power supply unit
  1. Mechanical:
  2. Construction Material: 6-mm thick aluminum
  3. Viewing Window: Tempered flat glass
  4. Weather-resistant powder coating in these available colors:
  5. Black (RAL9005)
  6. Gray (RAL7001)
  7. White (RAL9003)
  8. Dimensions (W x H x D):
  9. Upright mount and Inverted: 385 x 330 x 165 mm (15.2 x 14.2 x 6.5 in.)
  10. Canted at a 45° angle: 385 x 330 x 217 mm (15.2 x 13.0 x 8.5 in.)
  11. Weight: 6.5 kg (14.3 lb) including a 4-in. pitch circle diameter (PCD) base
  1. Environmental:
  2. Operational Temperature: -20°C to 50°C (-4°F to 122°F)
  3. Weatherproofing: NEMA 4x/IP68

2.3ACCESSORIES

  1. Mounts available for mounting the camera in an upright or inverted position either on a base, from a ceiling, on a wall, or at the corner of a structure
  2. Option to fit a washer nozzle to the 4-inch PCD base
  3. Optional integrated wiper with replaceable wiper blade
  4. Optional safety chain
  5. Optional 3D, scaling perspective privacy card with unlimited zones (housed in the camera head)
  6. Standard IR-variant power supply with an integrated 4-input alarm and washer pump drive card

2.4SUPPORT INFORMATION

  1. Comprehensive operation manual and installation manual provided on CD (English)
  2. Comprehensive quick start guide (English)

PART 3– EXECUTION

3.1EXAMINATION

  1. Examine areas to receive devices and notify adverse conditions affecting installation or subsequent operation.
  1. Do not begin installation until unacceptable conditions are corrected.

3.2PREPARATION

  1. Protect devices from damage during construction.

3.3INSTALLATION

  1. Install devices in accordance with manufacturer’s instruction at locations indicated on the floor drawings plans.
  1. Perform installation with qualified service personnel.
  1. Install devices in accordance with the National Electrical Code or applicable local codes.
  1. Ensure selected location is secure and offers protection from accidental damage.
  1. Location must provide reasonable temperature and humidity conditions, free from sources of electrical and electromagnetic interference.

3.4FIELD QUALITY CONTROL

  1. Test snugness of mounting screws of all installed equipment.
  1. Test proper operation of all video system devices.
  1. Determine and report all problems to the manufacturer’s customer service department.

3.5ADJUSTING

  1. Make proper adjustment to video system devices for correct operation in accordance with manufacturer’s instructions.
  1. Make any adjustment of camera settings to comply with specific customer’s need.

3.6DEMOSTRATION

  1. Demonstrate at final inspection that video management system and devices functions properly.

END OF SECTION

Project Name/Project #/2-12-1928 23 29 - 1Video Surveillance Remote

Devices and Sensors