APEC Project Interview on Standards Professional -Type C. For Global Thought Leaders
APEC Project Survey (Interview)
to Learn about Career Path of Standards Professional – Type C. Global Thought Leader
*APEC Project CTI 07/2013T
APEC Sub-Committee on Standards and Conformance (SCSC)
Prepared & Submitted by:Republic of Korea(final)
Co-Sponsored by: China, Indonesia, Japan, Malaysia, Peru, Singapore, USA, Vietnam
Requested Action: Survey Response by March 31, 2014
Note: Your timely contribution is very much appreciated.
to the project editor, Dr. Donggeun CHOI of Korean Standards Association.
(Email: , Phone:+82-2-6009-4850, Fax:+82-2-6009-4839)
1 February 2014
To: Global Thought Leaders in Standards-related Activities
Subject: APEC Survey to develop ‘Standards Professional Development’
The APECSub-Committee on Standards and Conformance (SCSC) is undertaking a project, led by Korea, to define next generation of standards professional, future human resources in the area of standards and conformity assessment, so as to improve the competitiveness of the APEC Member economies.
APEC has commissioned the Korean Agency for Technology and Standards (KATS) with support from Korean Standards Association (KSA) to conduct the project. The objectives of thisproject questionnaire are:
To define what ‘standards professional’– covering standards and conformance, with a focus on ‘documentary standards’
To identify current & future career path of global thought leaders in standards community both in public and private sectors
To share recommendations for the discussion in the APEC Subcommittee on Standards and Conformance (SCSC) to inspire standards professionals
On behalf of the APEC SCSC member economies, we are writing to invite you to participate in this important initiative.Attached please find an interview questionnaire as a starting point for the project. We worked to simplify the interview questionnaire so it can be completed within modest amount of time. You are cordially requested to respond no later than March 31, 2014,.
Thank you in advance for your contribution. If you have questions or suggestions, please contact Korea at by r by phone +82-2-6009-4850.
Sincerely,
Choongang CHOProject overseer of APEC CTI 07/13T
Korean Agency for Technology and Standards (KATS) / Donggeun CHOI
Project editor of APEC CTI 07/13T
Korean Standards Association (KSA)
Preface. Standards Professional:
- interim definition and classification for this survey -
Because there is no universally used or accepted definition of standards professional yet, this survey provides a preliminary definition of standards professional for the purpose of this survey.
Standards professional are those people who have job or business activities in the areas of standardization, conformity assessment, and metrology. Usually, these professional activities require certain level of knowledge, skills, experiences as well as education. These standards related activities may be their full (primary) or partial (secondary) duty in terms of priority or time allocation. The responsibilities of standards professional may include the following tasks, but not limited to.
[ST.00] Tasks of StandardizationProfessional
[ST.01]
Planning
and Evaluation / (Standards-specialty organizations)
Strategy/policy setting and legislation
Cooperation/coordination with SDOs
Performance/achievement evaluation
Standardization needs & trend analysis
(Companies)
Strategy/plan setting, standardization and patenting strategy
Cooperation with NSB/SDO and forum/consortium
Performance/achievement evaluation
Standardization needs & trend analysis
[ST.02]
Development / (Standards-specialty organizations)
Committee secretariat (Standards development processing)
Development (by staff)
Development (by technical committees)
Development (by accredited/cooperative SDOs)
(Companies)
Development (company standards)
Development (participation in external SDO’s activities)
[ST.03]
Dissemination / (Standards-specialty organizations)
Copyediting & publication; Sales & marketing
Information services
Consultancy and training
(Companies)
Standards information management
- copyediting, publication, distribution of standards
Training for standards application
[ST.04]
Others / (Standards-specialty organizations)
TBT inquiry related issues, link of standards-regulation
(Companies)
TBT, Regulation analysis and reaction (domestic, foreign)
[CA.00] Tasks of Conformity Assessment Professional
[CA.01]
Testing / (Standards-specialty organizations)
Testing service development & operation
Establishment of management system for testing laboratory (ISO/IEC 17025);
Testing method development;
Testing
(Companies)
Testing procedure development
Testing for materials, component, and product,
Testing for new product development
[CA.02]
Inspection / (Standards-specialty organizations)
Inspection service development & operation
Establishment of management system for inspection body ISO/IEC 17020);
Inspection criteria & method development;
Inspection
(Companies) Inspection procedure development
Receiving inspection for materials
In-process inspection;
Final inspection for product
[CA.03]
Certification / (Standards-specialty organizations)
Certification scheme development & operation
Establishment of management system for certification body (ISO/IEC 17065, 17021);
Certification criteria & method development
Certification audit/assessment
(Companies)
Acquisition & maintenance of certification for product, service, or management system
[CA.04]
Accreditation / (Standards-specialty organizations)
Accreditation scheme development & operation
Establishment of management system for accreditation body (ISO/IEC 17011)
Accreditation criteria & method development
Accreditation assessment
(Companies) Accreditation related tasks
[CA.05]
Others / (Standards-specialty organizations) any other tasks
(Companies) Any other tasks
[ME.00] Tasks of Metrology Professional (or Metrologist)
[ME.01]
Scientific Metrology / (Standards-specialty organizations)
Establishment & dissemination of national measurement standards
Research & development of measurement standards
International Key comparison
(Companies)
Application of measurement standards
[ME.02]
Industrial Metrology / (Standards-specialty organizations)
Calibration service development & operation
Management system for calibration laboratory (ISO/IEC 17025)
Calibration procedure development; Calibration;
Reference material production
Management system for reference material producer (ISO Guide 34)
Reference material certification (ISO Guide 35)
(Companies)
Establishment of management system for calibration laboratory (ISO/IEC 17025)
Calibration procedure development; Calibration; Application of reference materials
[ME.03]
Legal Metrology / (Standards-specialty organizations)
Policy and Legislation for legal metrology
Type approval, verification and periodical Inspection for measuring instruments;
Net weight certification for pre-packaged food
(Companies)
Compliance with laws/acts on legal metrology
[ME.04]
Others / (Standards-specialty organizations)
Development Standard reference data (SRD)
(Companies)
Application of standard reference data (SRD)
Note 1:
These terms used here are defined in following references:
ISO/IEC Guide 2 (Standards, Standardization)
WTO/TBT Agreement (Standards, Regulations, Conformity Assessment)
BIPM website (Scientific/ Industrial/ Legal Metrology)
Note 1:
Standards-specialty organizations are specialized organizations mainly dedicated for standardization, conformity assessment, and metrology. These include national standards bodies (NSBs, usually the members of ISO or IEC), standards developing organizations (SDOs), testing laboratories, certifications bodies (CBs), accreditation bodies (ABs), national metrology institutes (NMIs). The organizations can be governmental, public, or private (either non-for profit or for-profit). Governmental regulatory agencies may be considered as a specialty organization in a sense that they set and enforce mandatory standards (technical regulations).
Note 3:
Please note that, as this project will have completed, the definition will be updated based on the input of APEC SCSC members through this survey and discussion of upcoming project workshop in 2014.
1
APEC Project Interview on Standards Professional -Type C. For Global Thought Leaders
The final interview results will be incorporated in the final report of the APEC project as a form of column in related chapters in both online in APEC website and hardcopy report. After receiving your written input for this interview, we will edit the interview and return it to you to review before we proceed with page layout. We also need you high resolution photograph of you to accompany with the interview.
-Length: 1200 words to 2500 words (2~3 paragraphs per each question)
-Photo: High resolution JPEG file (500K or higher)
-Response by: March 31st, 2014
QUESTIONS ======
This questionnaire is developed to share your experience, review, and vision on standards professional for next generation as well as human resources planner in standards-specialty organizations:
- For young generation who might work in standards community, perhaps you career could be a best practice. Would you please describe your career path as a global thought leader in standards community, when and how you started your career, and have developed it throughout your professional life by far?
* You may describe major tasks in the organization (company), positions, years, tasks
- What do you think are the most important event(s) or experiences(s) in your professional career as standards professional? How does it impact on your career? What have been the most important success factors?
- We assume that you used to or will recruit new employees in the organization (company) you are working or used to work. What kind of standards professionals did you hire or will hire. What kind of knowledge, skills, experiences, or attitudes do you expect from them.
* You may differentiate them per jobs or positions if appropriate
- How do you see conceptually professional development or practically job market for standards professionals? Could you share your vision or prediction on standards professionals with next generation or current experts working in standards-related tasks?
- Finally, please share your suggestions or recommendations to inspire standards professional development, to APEC Member Economies, their organizations or companies, in terms of regional or international cooperation.
======
1