Specification Texts
Automatic Swing Door Drive Systems
Power
Item 1: Gilgen FD 20 swing door drive unit
Gilgen FD 20 swing door drive unit, type-approved according to DIN 18650 and EN 16005,
Low-noise electromechanical drive unit with adjustable reset spring; suitable for internal and external doors (including emergency exits and rescue access routes), illuminated program selector keys integrated in the side cover, with programmable NIGHT-EXIT-AUTOMATIC-MANUAL-OPENING functions.
Drive mechanism
Dimensions (H x D x W): 95 mm x 120 mm x 690 mm
Weight: 10,5 kg
Mains power connection: 230V/50 Hz, main installation switch integrated into drive mechanism
Power supply for external elements: 24 VDC (2000 mA)
Covering
( )Aluminum cladding E6/EV1, natural anodized
( ) Cladding in polished chromium steel
( ) Integral aluminium cladding E6/EV1
Door parameters
Door leaf widths 850 mm to 1600 mm (EN sizes 3-7)
Door leaf weight up to 250 kg
Configuration:
( ) Single leaf
( ) Bi-parting
Mounting options
Installation:
( ) Installation on hinge side with sliding rods with pulling function (lintel depth +150/-30 mm)
( ) Installation on opposite hinge side, with sliding rod with pushing function (lintel depth +150/-30 mm)
( ) Installation on opposite hinge side with standard rods with pushing function (lintel depth 0 to 250 mm)
( ) Door leaf installation on hinge side with rods with pushing function
Sensors
Options:
( ) Sensor strip for protection on the hinge side, conforming to DIN 18650 and EN 16005
( ) Sensor strip for protection on the opposite hinge side, conforming to DIN 18650 and EN 16005
( ) Laser LZR-FLATSCAN designed for the protection on the hinge side and opposite hinge side, including the secondary closing edge, in accordance with DIN 18650 and EN 16005
Control elements
Options:
( ) Door sensor Radar inside
( )Door sensor Radar outside
( ) Contactless button
( ) Externally fitted D-BEDIX program selection unit with display (max. distance 30 m), useful in the event of impeded access to the integrated selector switch.
( ) Badge reader supplied by customers
( ) Foot or elbow-operated switches
Drive functions
Full-energy drive mechanism with built-in, configurable low-energy function (for operation without safety sensors)
Description:
- Extremely uncomplicated commissioning and operation, guided by the integrated graphic display
- Adjustable opening angle (up to 105°)
- Opening and closing speeds of up to 27°/s in low-energy mode
- Opening and closing speeds of up to 40°/s in full-energy mode
- Adjustable "push and go" function (dependent on opening angle)
- Adjustable locking pressure
- Adjustable, accelerating function (forceful closing) in the de-energized state
- Single leaf opening for bi-parting doors
- Integrated USB-update interface
- Interface for optional PCBs
- Connection terminals for operating elements, sensors and door openers
- Motorized locks, with or without feedback contact
Extension
Options:
( ) Extended relay PCB with four freely configurable relay contacts for various feedback signals
( ) Extended wireless PCB for handicapped-accessible opening of the door
Open position stop piece (to prevent vandalism)
Options:
( ) Door stop piece fitted by customers (floor/ceiling)
( ) Stop piece fitted onto the drive mechanism (no additional hallway/ceiling installation required)
Gilgen Door Systems AG, Freiburgstrasse 34, CH-3150 Schwarzenburg
Tel. +41 (0)31 734 41 11, Fax +41 (0)31 734 43 79
,