2007年实验室发表论文（2）
1． Study on the damping behavior of Al/SiCp composite in thermal cycling
……………………………………………Hongxiang Zhang, Mingyuan Gu 1
2． Studies on machinability of Al/Sip + SiCp composite materials
…………………………Qiguo Zhang, Jianxun Qiu, Yi Wang, MingyuanGu 8
3． Analyses of interfacial stresses and normal stresses within an elongated film strip/substrate system
………………………………X. C.Zhang, B. S. Xu, H. D. Wang, Y. X Wu 14
4． Damping capacity of in situ TiB2 particulates reinforced aluminium composites with Ti addition
…………………………………Yijie Zhang, Naiheng Ma, Haowei Wang, Yongkang Le, Xianfeng Li 20
5． A physical gel made from hyperbranched polymer gelator
………………Yongwen Zhang, Wei Huang, Yongfeng Zhou, Deyuan Yan 25
6． Application of functionally graded interlayer on reducing the residual stress discontinuities at interfaces within a plasma-sprayed thermal barrier coating
…………………………X.C.Zhang, B.S Xu,H.D.Wang, Y. Jiang, Y.X. Wu 28
7． Residual stress redistribution within high-temperature coatings due to surface cracks
………………………X.C.Zhang, B.S.Xu, H.D.Wang, Y. Jiang, Y.X.Wu 32
8． Optimum designs for multi-layered film structures based on the knowledge on residual stresses
………………………………X.C.Zhang, B.S. Xu, H.D Wang, Y.X.Wu 40
9． Residual stress relaxation in the film/substrate system due to creep deformation
………………………………X.C.Zhang, B.S.Xu, H.D.Wang, Y.X. Wu 47
10．Residual stress distributions within high-temperature coatings
…………………………X.C.Zhang, B.S.Xu, H.D.Wang, Y.X.Wu, Y. Jiang 53
11．Effects of compositional gradient and thickness of coating on the residual stresses within the graded coating
………………………X.C.Zhang, B.S. Xu, H.D.Wang, Y.X.Wu, Y.Jiang 56
12． Hertzian contact response of single-layer, functionally graded and sandwich coatings
…………………………X.C.Zhang, B.S. Xu, H.D.Wang, Y.X.Wu, Y.Jiang 62
13．Underlying mechanisms of the stress generation in surface coatings
…………………………X.C.Zhang, B.S. Xu, H.D.Wang, Y.X.Wu, Y.Jiang 70
14．In situ synthesis of hybrid-reinforced titanium matrix composites
………………………Zhifeng Yang, Weijie Lu, Lin Zhao, Junqiang Lu,
Jining Qin, Di Zhang 74
15．Friction and wear behavior of Ni-graphite composites prepared by electroforming
………………………………Haijun Zhao, Lei Liu, Wenbin Hu, Bin Shen 79
16．Investigation on wear and corrosion behavior of Cu-graphite composites prepared by electroforming
……………………………Haijun Zhao, Lei Liu, Yating Wu,Wenbin Hu 84
17．Microstructure and corrosion behavior of electrodeposited nickel prepared from a sulphamate bath
……………Haijun Zhao, Lei Liu, Jianhua Zhu, Yiping Tang, Wenbin Hu 92
18．Nanostructured yttria stabilized zirconia coatings deposited by air plasma spraying
…………………………Zhou Hong, Li Fei, He Bo, Wang Jun, Sun Bao-de 96
19．Hydrothermal synthesis of ZnO hollow spheres using spherobacterium as biotemplates
………………………………………Han Zhou, Tongxiang Fan, Di Zhang 101
20．Novel bacteria-templated sonochemical route for the in situ one-step synthesis of ZnS hollow nanostructures
……………Han Zhou, Tongxiang Fan, Di Zhang, Qixin Guo, Hiroshi Ogawa 107
21．Air plasma sprayed thermal barrier coatings on titanium alloy substrates
…………………………Han Zhou, Fei Li, Bo He, Jun Wang, Bao-De Sun 110
22．Observation of carbonaceous mesophase behaviors in phenolated sawdust using polarized light microscopy
…………………………Jie Zhou, Bin Yuan Zhao, Qi Gan, Rui Bin Wang,
Yi Jian Lai, Di Zhang, Ke Ao Hu 118
23．Temperature-responsive phase transition of polymer vesicles: Real-time morphology observation and molecular mechanism
………………………Yongfeng Zhou, Deyue Yan, Wenyong Dong, Ye Tian 125
24．Isothermal crystallization kinetics of polypropylene with silane functionalized multi-walled carbon nanotubes
…………………………ZHEN ZHOU, SHIFENG WANG, LAN LU, YONG ZhANG, YINXI ZhANG 134
25．Effects of nitrogen partial pressure on microstructure, morphology and N/Ti ratio of TiN films deposited by reactive magnetron sputtering
………………………………………………K. Yang, J. Q.Jiang, M. Y. Gu 143
26．Fabrication of self-lubricating coating on aluminum and its frictional behavior
……………………………………………………Hui Wang, Haowei Wang 148
27．Grafting of thermo-responsive polymer inside mesoporous silica with large pore size using ATRP and investigation of its use in drug release
……………………………………Zhengyang Zhou, Shenmin Zhu, Di Zhang 152
28．Mechanical properties of Cu/SiCp composites fabricated by composite electroforming
…………………………………Jianhua Zhu, Lei Liu, Bin Shen, Wenbin Hu 158
29． Synthesis and characterization of hybrid nano-crystallites inside self-ordered mesoporous carbon
……………………………………Shenmin Zhu, Haoshen Zhou, Deyue Yan 164
30． Generalized CAPP and synthetic evaluation strategy for production line of accuracy welding
……………………………………………………Kong Liang, Wu Yixiong 170
31．Ferroelectric and pyroelectric properties of highly (110)-oriented Pb(Zr0.40Ti0.60)O3 thin films grown on Pt/LaNiO3/SiO2Si substrates
………………Yiping Guo,Daisuke Akai,Kzauaki Swada and Makoto Ishida 177
32． Investigations on the microstructure and hardening mechanism of TiN/Si3N4 nanocomposite coatings
………………………………Ming Kong, Wenji Zhao, Lun Wei, Geyang Li 180
33．Competitive growth of high purity aluminum grains in directional solidification
……………………Zhang Jiao,Shu Da,Wang De-lin,Sun Bao-de,Chen Gang 186
34．Crystallization of amorphous SiC and superhardness effect in TiN/SiC nanomultilayers
………………………………Ming Kong, Jiawei Dai, Jijun Lao, Geyang Li 192