Page 1 of 4
Title / Fell trees using machine pushing assistance
Level / 4 / Credits / 5
Purpose / This unit standard is intended for people employed as tree fellers in a commercial forest harvesting operation. Tree fellers often require the use of a machine to assist in felling trees growing along boundaries, close to environmentally sensitive areas, within two tree lengths of roads, close to physical structures, and in other hazardous situations. Tree fellers using machines to assist in felling trees are responsible for the safety of the machine operator, the observer, and any other person directly involved in the felling. Machines suitable for pushing trees include wheeled and tracked excavators.
People credited with this unit standard are able to: demonstrate knowledge of the use of a machine to push trees to assist tree felling; prepare for tree felling where machine assistance is required to push trees; and fell trees using machine assistance to push trees.
Classification / Forestry > Tree Felling
Available grade / Achieved
Entry information
Critical health and safety prerequisites / Unit 28560, Fell trees in a commercial forest harvesting operation; or demonstrate equivalent knowledge and skills.
Explanatory notes
1This unit standard must be assessed against on-job.
2Definition
Accepted forestry industry practicerefers to documentedcodes of practice and standardised procedures accepted by the wider forestry industry as examples of best practice.
PPE refers to personal protective equipment and may include but is not limited to high-viz, protective clothing, gloves, face and eye protection, safety helmet, footwear, hearing protection, and safety devices.
Worksite procedures refer to documented procedures used by the organisation carrying out the work and applicable to the tasks being carried out. They may include but are not limited to – standard operating procedures, site safety procedures, equipment operating procedures, quality assurance procedures, housekeeping standards, procedures to comply with legislative and local body requirements.
Outcomes and evidence requirements
Outcome 1
Demonstrate knowledge of the use of a machine to push trees to assist tree felling.
Evidence requirements
1.1Situations where machine pushing of trees may be required are described in accordance with the accepted forestry industry practice and worksite procedures.
Rangedifficult trees and sites, environmental considerations, hung-up trees, cut-up trees.
1.2Rules for machine pushing of trees are described in accordance with the accepted forestry industry practice.
1.3Tree felling techniques involving machine pushing are explained in accordance with the accepted forestry industry practice.
Rangemachine requirements, machine positioning, observer, communication, scarf alignment, quarter cut back cut.
1.4Hazards associated with machine pushing of trees are identified and methods of management are explained, in accordance with the accepted forestry industry practice.
Rangemay include but is not limited to – tree movement, slope, ground conditions, logging debris, overhead hazards, insufficient hinge wood remaining, pushing point slipping off the tree stem, unexpected movement of machine or attachment, poor communication, obstructed visibility.
Outcome 2
Prepare for tree felling where machine assistance is required topush trees.
Evidence requirements
2.1Personal protective equipment (PPE) of all personnel meets the accepted forestry industry practice.
2.2Personnel capability meets requirements of the tree felling situation in accordance with worksite procedures.
Rangeequipment, skills, number of people.
2.3Requirements and responsibilities for all aspects of the operation are communicated to personnel in accordance with the accepted forestry industry practiceand worksite procedures.
2.4Communication is established between all personnel involved using recognised industry verbal instruction and/or hand signals in accordance with worksite procedures.
2.5Factors affecting machine suitability are described in accordance with the accepted forestry industry practice.
Rangemay include but is not limited to – access, slope, ground conditions, machine capability, pushing point;
evidence of four is required.
2.6Felling method is determined according to the conditions on site and the resources available, in accordance with the accepted forestry industry practiceand worksite procedures.
Rangedirection of fall, safety, equipment, method to be employed.
Outcome 3
Fell trees using machine assistance to push trees.
Evidence requirements
3.1Site and tree are assessed and felling plan determined and communicated to others involved in the operation in accordance with the accepted forestry industry practice.
3.2Work area and escape route are prepared by the feller in accordance with the accepted forestry industry practice.
3.3Felling is carried out in accordance with the accepted forestry industry practice.
Rangesequence of cuts, timing of cuts, machine positioning, communication, use of safe area, timing of push.
Planned review date / 31 December 2020Status information and last date for assessment for superseded versions
Process / Version / Date / Last Date for AssessmentRegistration / 1 / 22 May 2008 / 31 December 2013
Revision / 2 / 15 September 2011 / 31 December 2016
Review / 3 / 19 March 2015 / N/A
Consent and Moderation Requirements (CMR) reference / 0173
This CMR can be accessed at
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact Competenz if you wish to suggest changes to the content of this unit standard.
.
CompetenzSSB Code 101571 / New Zealand Qualifications Authority 2018