4401 Line Item 5

Summary of Editorial Changes

Note: Original section number and at least one full sentence are required in “FROM” and “TO” fields.

1 / FROM: Table A1-2 – Read Manual symbol

TO: Table A1-2 – Read Manual symbol

Justification: (If necessary)
To better match border (and color) of the Read Manual symbol to other mandatory surround symbols in Table A1-2.
Note that, per section 9.10.2.1 of S1-0701 (unchanged in these line item ballots), either depiction is technically acceptable: “The border should be white; the border is optional if the surrounding background is white or yellow.” However, this editorial change properly aligns this new symbol with all others in the table, correcting a ballot assembly error.
MOTION TO APPROVE:
Ed Karl (Applied Materials) / Bert Planting (ASML)
Disc: Noted that in editorial change, color match to ballot isn’t perfect. Ian McLeod (SEMI) said it could be fixed administratively.
Vote: 12-0. Motion passed
2 / FROM: Table A1-2
(as balloted)
TO: Table A1-2
Swap the two #9 rows in the balloted version of Table A1-5 so that the “Read Manual (alternate)” row follows the “Read Manual” row.
Justification: (If necessary)
Reason for the editorial revision: Improves logical flow.
MOTION TO APPROVE:
Ed Karl (Applied Materials) / Bert Planting (ASML)
No discussion, Vote: 12-0. Motion passed.
3 / FROM: NOTE 2
The guidance provided in this document may also be adapted to help communicate safety information in installation instructions, operation and maintenance manuals, and other similar written communication relating to a product.
TO: NOTE 2
The guidance provided in this document may also be adapted to help communicate safety information in installation instructions, operation and maintenance manuals, and other similar written communication relating to a product. See also ANSI Z535.6, American National Standard for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials.
Justification: (If necessary)
Reason: adds newly released (2006) relevant document. Editorial because included in NOTE rather than official text.
4 / FROM: Section 4.1
SEMI Standards
TO: Section 4.1
SEMI Standards and Safety Guideline
Justification: (If necessary)
Reason: update to latest SEMI formatting guidelines. Administrative.
5 / FROM: Section 4.2
ANSIZ535.1 — Safety Color Code
ANSIZ535.3 — Criteria for Safety Symbols
ANSIZ535.4 — Product Safety Signs and Labels
TO: Section 4.2
ANSIZ535.1 — American National Standard for Safety Color Code
ANSIZ535.3 — American National Standard for Criteria for Safety Symbols
ANSIZ535.4 — American National Standard for Product Safety Signs and Labels
Justification: (If necessary)
Reason: correct omission from S1-0701 publication.
6 / FROM: Section 4.2
(add the following)
TO: Section 4.2
ANSI Z535.6 — American National Standard for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials
Justification: (If necessary)
Connected to EC # 3 above.
7 / FROM: 15.3
NFPA178 — Standard Symbols for Fire Fighting Operations
TO: 15.3
NFPA1708 — Standard for Fire Safety and Emergency Symbols Standard Symbols for Fire Fighting Operations
Justification: (If necessary)
Reason: update to reflect 2006 release of NFPA 170 Justification: No technical content in document affected by this change.
8 / FROM: 15.7
ISO9186 — Comprehension Testing of Graphical Symbols
TO:
ISO9186-1 — Graphical symbols -- Test Methods -- Part 1: Methods for testing comprehensibility Comprehension Testing of Graphical Symbols
Justification: (If necessary)
Reason: updated per 2007 release of updated ISO document Justification: No technical content in document affected by this change.
Motion / To approve the above editorial changes 3 through 8 only
Motion by / 2nd by / Thomas Pilz (Pilz Automation) / Steve Barcik (High Tech Design Safety)
Discussion
Vote / 11-0 Motion passed.
A&R / Not approved
Reason: