Product Limited One Year Warranty

This product is manufactured according to exacting quality control standards and warranted to be free of manufacturing defects. If your product is discovered to be defective within one year of purchase, return the remaining product to the place of purchase with proof of purchase, and Ames Research Laboratories, Inc., with reasonable evidence that the product is defective, and not frozen, Ames will replace that product with a product of equal value or another product or refund the difference of the purchase price and remaining shown to be defective product.
Under no circumstances shall Ames Research Laboratories, Inc. or its affiliates, stores, store sales personnel or company sales people be liable for incidental, consequential or other damages from alleged negligence, breach of warranty, strict liability or any other theory arising out of the use or handling of these products.

The sole liability of Ames Research Laboratories, Inc. and its affiliates for any claims arising out of the manufacture, use, or sale of its product is limited and shall be for the buyer’s purchase price only. Neither Ames Research Laboratories, Inc. nor its affiliates assumes any obligation or liability for the information contained within its documents, labels, or internet suggestions or directions or the results obtained on testing or claims of Ames Research Labatories, Inc.
The information in this document is provided without warranty and is to be utilized by customers using the product at the customers’ sole risk. Customers must conduct their own tests in actual use conditions before commercial or residential use of the product. The information on the label, on the internet, on the product package itself, or on the specifications is simply a suggestion. Any suggestions are also provided without warranty. Since the environment differs across the country and world, the customers must conduct their own test in actual use conditions before using the product. With the purchase of the product, the customers acknowledge acceptance of these terms.
Other Exclusions (Roof or Roof Deck): This guarantee in no way implies replacement due to product failure from improper application, inadequate rooftop drainage, or ponding. Proper application is a part, but not limited to, the specifications that the product will be applied in a continuous, unbroken seal of a minimum dry thickness or no less than 30 mils (the thickness of a dime). The user is responsible for complying with local construction methods of applications and laws. This warranty is in place of any implied warranty of merchantability and all other warranties expressed or implied. This guarantee applies only to the distributor or purchaser of the product and cannot be extended to any other person or entity.
This warranty is not an insurance policy to guarantee or to warranty an improperly prepared surface. Surfaces must be clean and dry before the coating application. Users must run a test patch first in an inconspicuous area to ensure that proper adhesion and drying occurs and the product works to their satisfaction before proceeding with application. No warrantee is given for the actual application or the inability to apply the product on a good substrate, a not savable substrate, wither it be roof, wall, deck floor, or some other creative application, designed by the User or users themselves. Ames Research Laboratories, Inc. may make some suggestions of other used applications designed by others who have been successful but not necessarily approved architecturally applications but assumes no responsibilities for suggestions made by its sales personnel or those suggestions made outside this company or corporation. By purchasing these products users assume sole responsibility for applications or uses of these products.
Adhesion Exclusions (Concrete surface floor or Roof): This warranty does not determine whether the surface is a savable surface in anyway whatsoever. Some surfaces are not savable, and in poor disrepair and users are responsible for making this determination and in restoring their job to a savable condition.
There is no warranty for any surface such as concrete that has decomposed or deteriorated. Users must determine whether the surface was properly prepared, properly high pressure washed to shot blaster, and if in winter months, the roof, wall or deck surface is under water for long periods of time.
Frozen Product Exclusions: Frozen product will solidify and is not covered under product defect warranty. Product must be protected from freezing. Since the manner and condition of application are beyond our control, seller or manufacturer shall not be liable for any injury, loss or damage, direct or consequential arising out of the use or the inability to use this product. This is a Do-It-Yourself product. Purchasers or users assume all responsibility for uses or applications of the product.
BELOW IS EXCESS MATERIAL
Other Exclusions:
Severe weather or standing water may require annual maintenance as needed. These areas will need reinforcing with Ames Roofing Fabric CRF-250 that is embedded in Ames ElastoBarrier, top-coated with Ames acrylics such as Ames Maximum Stretch, Snow Seal, Iron Coat, Liquid Granite, or Safe-T-Deck, product for additional reinforcement and strength. Our products work together in a system. We do not warranty other manufacturers’ products or problems that may arise in conjunction with using them with Ames Research Laboratories products. The user assumes responsibility of maintenance at the user’s expense.
The specifications are only suggestions. Ames Research Laboratories assumes no liability since the manner and condition of application are beyond our control. No warranty is made, whether expressed or implied, including warranties of merchantability or of fitness for a particular purpose for these products. No statements or recommendations contained herein are to be construed as inducements to infringe any relevant patent, now or hereafter in existence. The testing reference information in this document is provided without warranty and is to be utilized by users of the product at the user’s sole risk.
ADDITIONAL NOTES:
protect your investment by doing annual maintenance as needed.
Difficult surfaces may need ARL reinforcing fabric CRF 250 imbedded in Elasto-Barrier as described on the package, or any appropriate ARL product over a smooth savable surface.
These are only some suggested methods and ARL assumes no responsibility for these suggestions. The user should conduct their own tests, talk to their own building code officials or obtain their own architects/engineers before proceeding.

Ames Research Laboratories, Inc. ● 1891 16th Street S.E. Salem, Oregon USA 97302

Toll-Free: 888-345-0809 ● Phone: 503-588-3330 ● Fax: 503-364-2380 ●