4317 version 6

Page 1 of 3

Identify levels of finish, calculate quantities and order stopping compounds for fibrous plaster work

Level / 3
Credits / 4

PurposePeople credited with this unit standard are able to identify levels of finish for fibrous plaster walls and ceilings; and calculate the quantities of materials required and prepare an order.

Subfield / Construction Trades
Domain / Fibrous Plaster
Status / Registered
Status date / 25 January 2008
Date version published / 25 January 2008
Planned review date / 31 December 2011
Entry information / Open.
Accreditation / Evaluation of documentation and visit by NZQA and industry.
Standard setting body (SSB) / Building and Construction Industry Training Organisation
Accreditation and Moderation Action Plan (AMAP) reference / 0048

This AMAP can be accessed at

Special notes

1Definition

Specifications refers to documented instructions (oral, written, graphic) and may include any of the following: manufacturer’s specifications recommendations or technical data sheets; material specifications; specifications from a specialist source such as an architect, designer, engineer or a supervisor; site or work specific requirements.

2Reference materialAS/NZS 2589:2007Gypsum linings – Application and finishing, available from Standards NZ (

3Credit for this unit standard indicates compliance with industry practice. Industry practice refers to the ability to demonstrate knowledge and skills that reflect the productivity, uniformity, finish quality and material economies currently accepted within industry.

Elements and performance criteria

Element 1

Identify levels of finish for fibrous plaster walls and ceilings.

Performance criteria

1.1Levels of finish for fibrous plaster work are described as specified by AS/NZS 2589:2007.

1.2The description identifies stopping compounds required to achieve the specified levels of finish.

Element 2

Calculate the quantities of materials required and prepare an order.

Performance criteria

2.1Area to be stopped is identified from working drawings or job specifications.

2.2Quantities of materials are calculated, and an order is prepared to the nearest unit of supply.

Please note

Providers must be accredited by NZQA, or an inter-institutional body with delegated authority for quality assurance, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.

Industry Training Organisations must be accredited by NZQA before they can register credits from assessment against unit standards.

Accredited providers and Industry Training Organisations assessing against unit standards must engage with the moderation system that applies to those standards.

Accreditation requirements and an outline of the moderation system that applies to this standard are outlined in the Accreditation and Moderation Action Plan (AMAP). The AMAP also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.

Comments on this unit standard

Please contact the Building and Construction Industry Training if you wish to suggest changes to the content of this unit standard.

 New Zealand Qualifications Authority 2018