PLUG – IN DIGITAL TIME SWITCHt-con

OPERATING INSTRUCTIONS

Description:

t-con is a plug–in programmer designed for controlling small household appliances,lamps, etc.

It also offers the possibility of doing short-time manouvres (2, 5 and 10 seconds).

Starting up:

After connection to power supply the following 4 buttons have to be pressed simultaneously: "D"+"M"+ ""+"C1". All segments of the display appear, time indication is 0:00 (Reset, total clearance).

Setting of time and day:

Keep pressing "" button during setting procedure. Set the arrow display to the relevant day by pressing "D". Set the time by pressing "H" and "M". Release "" button. The clock is now running.

Program capacity:

The time switch allows connection, disconnection or timed operation programmings to be carried out in blocks of one, several or every day of the week up to a maximum of 24 programmings.

Start of program entry:

Press "Prog" button.

The display shows --:--, 1 points are flashing on the right hand side. Press buttons "C1" or " " to select the kind of operation that is required:

Press "C1":- Once for "ON" connection.

- Twice for "OFF" disconnection

Press " " :- Once for 2-second timed operation

- Twice for 5-second timed operation

- Three times for 10-second timed operation

Now the arrow above 1 = Monday is flashing. If there is a timed operation, the display also shows the time of the timed operation on a second screen, accompanied by the simbol " " .

If the command should be carried out on Monday enter with "Prog" button each. If the switching command is for Monday to Friday at the same time, 5 arrows must be displayed on top of the figures 1...5. For daly settings 7 arrows must be displayed. After the entry of the day(s), enter the required switching time with buttons "H" and "M". Enter displayed switching command by pressing "Prog" button. If progam entry is finisched press "" button.

Attention: If a switching command "08:00 ON" is entered e.g. at10:20, the first switching operation is earliest the next day, no retrospective.

Recall of settings:

Recall ON and OFF setting one after the other with "PROG" button. After all the occupied memory locations a free one is offered. By pressing "PROG" once more, "End" is displayed. After finishing the recall press "" button.

Change or clearance of a command:

Recall the command by pressing "PROG" and change it by pressing "D", "H" and "M" or clear the command indicated by simultaneously pressing "H" + "M". Afterwards press. ""

Holiday program:

Holiday program to interrupt the automatic program for 1...47 days. By pressing the "H" button a 2 digit figure is displayed. The figure can be changed by pressing "C1" (keep pressing "H"). The max. possible no. of hoidays is 47. The programiming is cyclic, that is to say, the second digit to 47 is 0 (programmed 0 the holiday programme is cancelled). Cancellation will be effected from 00:00 the next day.

Whilst the holiday period continues, the letter "H" will be shown on the display and any operation can be carried out, unless the relay is always OFF.

Override:

Pressing "C1" the relay is switched ON/OFF alternately. The next counteracting automatic setting cancels the manual control.

Permanent control:

By simultaneously pressing "C1" + "M" the following functions can be chosen one after the other:

permanently ON - permanently OFF - automatic operation. The point on the display indicates the permanent function ON or OFF.

Change from wintertime - summertime hour: + 1 hour.

Keep button "D" pressed and press "H".

Change from summertime - wintertime hour: - 1 hour.

Keep button "D" pressed and press "M".

Sustitution of the battery

Disconnect TEMPO and remove the battery holder lid following the direction of

the arrow. Remove the battery respeding polarity. You have 4 hours to make this

sustitution without losing the programmed data.

Technical Data:

Operating voltage and frequency:110V (+10, -15%) 45-60 Hz

Power consumption:8.5 VA

Switching capacity:16(10)A/110VAC

Maximum load:1750W

Settings:24

Switching accuracy:precise to the second

Accuracy:± 1s/day at 20ºC

Power reserve:1 year ( with battery 1,5V type LR03-AAA)

Permissible ambient temperature:-10ºC to +45ºC

Protection category:IP 20

Plug and socket Schuko 4,8 mm.

Children security blocking system.

iks ComputerSysteme GmbH

Aquarientechnik

Mozartstraße 93

D-76307 Karlsbad

Fon:+ 49 7202 941140; Fax:+49 7202 941141

E-mail: info@ iks-aqua.com