Curriculum Vitae
Igor Semenko
Address:
No9 Breusa str, Odessa
65017, Ukraine
Mobile telephone: +380501404558
E-mail:
Nationality: Ukrainian
Day of Birth: 08th February 1967
OBJECTIVE:
Seeking a position as a hardware electrical engineer ,where my experience ,
training and a good work will be an asset to yours company.
SUMMARY OF QULIFICATION
Over 12 years of an offshore experience as an electro engineer of numerous dredgers and oil gas facilities.
EDUCATION BACKGROUND
I989 - 1994
Polytechnic University, Odessa State, Ukraine
Diploma of Master KB No 003398 Industrial Electronics
Graduated: Engineer of Electronic equipment
June 28.1994 Registration number :756 CT
2001 - 2002
Secondary Maritime School Odessa State, Ukraine
Diploma CK No 16097808
Graduated: Electrical, Electronics and Control Engineering
WORK EXPERIENCE
July 2008 – January 2011 “SAIPEM” ITALY
SEMISUBMERSIBLE DRILLING RIG SCARABEO 7
Since November of 2008 up to present days I was assigned
as a Night Shift Chief Electrician on the offshore drilling rig SCARABEO 7
Main activities and responsibilities:
SCR’s: Top drive Hydra lift/Bailey- Dimension:heigt 170 fl, capacity: 1.5000.000lbs
Drawworks –Wirth GH 3000EG – 3000 hp with PLC controlled BENTEC cabinet
Rotary table, Mud pumps Wirth TPK 2000 x 4 pcs - triplex pump pressure -
7.5000psi. Engines- Nohab – Vartsila F 212V C 900 1880kW X 5 units
Caterpillar. 3612 V 4 820 HP 3580 kW-2 pieces ; Generators- Nebb
– 2800KVA-5 pieces ABB HKS 900 – 2 units, total power - 22.500 hp
Engines load control - VMS (Ship management System),
and full monitoring of their set points (temperature of oil, cooling water, air ;oil flow
oil, water pressure, exhaust gases , load sharing system – includes auto start
engines sequence priority emergency stop item and etc .
Ballast control system, with full monitoring of process.
Kamel Trusters 4X3260 hp 4 units, X 2.4 MW 40 tons
Shale Shaker frequency driven (converter) el.motors
Four dual traction DC winches made BLM with 250 tons X 8 mooring lines.
Automatic Moring Assistance System (ATA) with 4 Kamewa azimuth Trusters
of 40 tons pull each and frequency driven AC motors of wire storages winches
Cranes: 1 Link Belt THC – 2600 with 80 Tons Capacity at 20 Mt, max radius 63m
1 X Liebherr Bos 50/190 with 50Tons capacity at 20 m, max radius – 63m
Riser System : Cameron RF – 21 diam X 0.68 thickness X 19. 2 m long each .

BOP: made in Hydralift ang fully mechanized, with aux equipment, BOP Stack –

Shaffer – 18.3/4 ‘’ – 15 000psi working pressure. Fire and gas installation

Obstruction lights. UPS cabinets support

of high voltage BUS bar drives (6.5kV) and etc, PCU and RIO and etc.

AMOS PMS (preventive maintenance system): the carry out daily maintenance of

each system such as: high voltage cabinets: 6.3kV, top drive,

DC motors , drive panels of them (troubleshooting and replacement) .
valves ( butterfly type) control and monitoring position of them.
calibrates of temperature and pressure sensors transmitters.
Overhauls of el. Motors and etc .

From time to time up-dates, replacement and adjustment of analogy sensors,

Transmitter’s and transducers family 4mA - 20mA scale, proximity switches,

magnetic switches and etc, also unexpected reparation of rig equipment

as required, , and a standard troubleshooting as required.

August 2006 - November 2007 «TRANSOCEAN » USA
SEMISUBMERSIBLE DRILLING RIG J .W. McLean
Rig Electrician.
Main activities and responsibilities:

SCR’s: Top drive, Rotary table, Shale shakers, Mud pumps and monitoring

system of that

Engines load control: auto start and full monitoring of them (temperature of oil,

Cooling water, oil flow, pressure, exhausts gas etc.) Water ballast control pumps

and monitoring system of that with remote valves control .

Drawworks with aux. pumps, control-monitoring panels.

Shale Shaker frequency driven motors (soft starter)

DC winches, Cranes,

BOP aux equipment, Fire and gas installation, Obstruction lights.

Carry out a daily maintenance in according a Chief Electrician task:
performing a periodic maintenance on appropriated equipment following the
AMOS procedure , the regular updates of primer sensors , interfaces , due to
applying the new generation primes sensors , transducers as required rig’s
task, and successful unexpected job , troubleshooting of given equipment..
March 2002 – June 2006 « DEME GROUP» BELGIUM
Company previous name : DI Dredging International
TSHD (Trailing suction hopper dredger) «PACIFIQUE»
Gravel TSHD «CHARLEMAGNE»
Single Electrical Engineer.
Main activities and responsibilities:
Main Engines :DAUTZ, CATERPILAR ,VARTSILA with RACAL DECCA and
PRACSIS control and engine monitoring system.
«PACIFIQUE» - bottom doors ,PS and STBD – STPM ( Suction Tube
Position Monitoring) with appropriated DC Drag head winches motor ,
Intermedium and Gantry winches.(STBD , PS)
«CHARLEMAGNE» - bottom doors and self crane UNLOADER – driven in
Semi-auto or fully auto mode with appropriated conveyers – IHC maker
Participate in the effective management of the Preventive Maintenance
System «PMS ». Familiarisation, troubleshooting , of the SIEMENS PLC
(SIMATIC 101 U),
RACAL DECCA Main Engines Control and monitoring system .Installed and
Adjustment the ABB DC drives cabinet of drag head DC motors(STBD PS) etc.
TRAINING COURSES
FURTHER OFFSHORE EMERGENCY TRAINING
including HUET & EBS
Baku Azerbaijan COURSE ID:5858
Cert No : FOET09260
H2S Awareness
Cert No BAA00445
Baku Azerbaijan
OFFSHORE LIFE BOAT COXWAIN TWIN FALL.
Aberdeen , Grampian , AB 32 6JL UK
Cert No : PTLAC0700002487
COPEX : « TRAINING AND CERTIFICATION OF PERSONEL WHO WORK
ON ELECTRICAL APPARATUS FOR USE IN POTENTIALLY EXPLOSIVE
ATTMOSPHERES» national certificate of core competence
Aberdeen , UK
EX01 Preparation & Installation of EX d; n ; e; and p; systems
EX02 Maintenance & Installation of EX d; n ; e; and p; systems
EX03 Preparation & Installation of EX i ; systems
EX04 Maintenance & inspection of EX i ;systems
Cert No : 15601
HV/LV SWITCHING PROCEDURES COURSE FOR OIL AND
MARINE OPERATIONS
The City and Guilds London Institute UK
HV/LV (1) ASSESSMENT
HV/LV (2) ASSESSMENT
Cert No : 0705/006164/067202/RVO0178/1/08/02/67
SECOND – CLASS ELECTRICAL ENGINEER
Function: electrical, electronics and control engineering.
Level : operational
Certificate of Competency.No01347/2005/01.
TRAINING&CERTIFYINING CENTER OF UKRAINIAN DANUBE
SHIPPING COMPANY A.S.9, Fanagoriyska st. Fortess, Izmail, Odessa
Region, UKRAINE, 68607. Tel/fax (04841)2-66-52 ; Tel.(048410 2-47-02
E-mail: .
Endorsement : attesting the issue of a certificate under the provision of the
International convention on standards of training, certification, and watch
keeping for seafarers 1978, as amended No01347/2005/01 Issued 09.08.2010
TRAINING&CERTIFYINING CENTER OF UKRAINIAN DANUBE
SHIPPING COMPANY A.S.9, Fanagoriyska st. Fortess, Izmail, Odessa
Region, UKRAINE, 68607. Tel/fax (04841)2-66-52 ; Tel.(048410 2-47-02
E-mail:
Proficiency in survival craft and rescue boats
Certificate No 2/427/10
TRAINING&CERTIFYINING CENTER OF SEAFARERS “AVANT”
93 Peremogy str, Illichivsk, smt Oleksandrivka 68001 Ukraine
Tel/fax: 38 (048) 718 – 37 – 92
E-mail:
Advanced fire fighting
Certificate No 2/285/10
TRAINING&CERTIFYINING CENTER OF SEAFARERS “AVANT”
93 Peremogy str, Illichivsk, smt Oleksandrivka 68001 Ukraine
Tel/fax: 38 (048) 718 – 37 – 92
E-mail:
Basic safety training and instruction
Certificate No 2/856/10
TRAINING&CERTIFYINING CENTER OF SEAFARERS “AVANT”
93 Peremogy str, Illichivsk, smt Oleksandrivka 68001 Ukraine
Tel/fax: 38 (048) 718 – 37 – 92
E-mail:
Medical firs aid on board ship
Certificate No 2/226/10
TRAINING&CERTIFYINING CENTER OF SEAFARERS “AVANT”
93 Peremogy str, Illichivsk, smt Oleksandrivka 68001 Ukraine
Tel/fax: 38 (048) 718 – 37 – 92
E-mail:
Maintenance of electrical and electronic equipment
Certificate No 2/226/10
TRAINING&CERTIFYINING CENTER OF SEAFARERS “AVANT”
93 Peremogy str, Illichivsk, smt Oleksandrivka 68001 Ukraine
Tel/fax: 38 (048) 718 – 37 – 92
E-mail:
PERSONALS SKILLS
I am a sociable, industrious, well-adjusted and attentive by nature;
I have excellent planning and organizational skills as well as excellent
rapport with supervisors and co-workers
I work well under pressure, I am an effective problem solver and a
conscientious and reliable worker.
LANGUAGES
Ukrainian :Native
Russian : Excellent
English: Very Good – written and spoken.
COMPUTER SKILLS
Operation system :Windows XP, Vista
Microsoft Office : Word ; Excel
Micro cap Spectrum Software –Analogy simulation of electronics circuits,
devices as well.
INTEREST
I have a hobby : to create electronic devices such as HI-FI amplifiers from
initial print cards up to a final modern style of device with perfect sound
controls of sound characteristic by PLC and digital monitoring of them.
In addition, I like to apply my electronic handy things in my car.
REFERENCES
References and letters of recommendation available on request.
AWARD
Drilling Excellence Award is presented to : Igor Semenko, for his contribution , in achieving six years without lost time injury on offshore drilling rig: SCARABEO 7