Hdpe Lockers and Benches

SECTION 10 51 26

HDPE LOCKERS AND BENCHES

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Summit Lockers Incorporated, HDPE athletic lockers and benches.
This section is based on the products of Summit Lockers Incorporated which is located at:
138 McLeod Rd.
Columbia, SC 29203
Toll Free: 888-310-7149
Tel: 803-403-8816
Fax: 877-828-2142
Email:
Web:
[ HYPERLINK " Here ] for additional information.
30 plus years experience in the industry.
While based in Columbia, South Carolina, Summit Lockers has established an ever-growing list client with sales expanding nationwide. Our company believes in maintaining positive, beneficial relationships with our clients to deliver the best customer service possible. From the initial sale to the the final installation, we assist our clients throughout the project.
How do we make quality products?
We utilize quality materials and innovative manufacturing techniques, to build the most durable lockers for our clients. Our designs can withstand high impact environments and the wear from everyday use. Custom designs are available from our dedicated design team. Specifications and cut sheets are available as resources.

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 HDPE lockers, hardware and accessories.

1.1.2 HDPE pedestal benches.

1.1.3 HDPE cubbies.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section 09 21 16.33 - Gypsum Board Area Separation Wall Assemblies.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

1.3.1 ASTM International (ASTM):

1.3.1.1 ASTM D 570 - Standard Test Method for Water Absorption of Plastic.

1.3.1.2 ASTM D 790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials.

1.3.1.3 ASTM D 1037 - Direct Screw Withdrawal Test.

1.3.1.4 ASTM D 1693 - Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics.

1.3.1.5 ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Material.

1.3.2 NEMA LD-3 - Standard Test, Chemical Resistance, Modulus of Elasticity, Shear Strength and Compression Strength.

1.3.3 U.S. Green Building Council (USGBC), LEED Green Building Rating System for New Construction.

1.3.4 ADA - Americans with Disabilities (ADA) Standards for Accessible Design.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:

1.4.2.1 Detailed technical data for materials, fabrication, and installation, including anchors, hardware, fasteners, and accessories.

1.4.2.2 Storage and handling requirements and recommendations.

1.4.2.3 Installation instructions.

1.4.3 Shop Drawings:

1.4.3.1 Dimensioned plans detailing layout of lockers, cubbies and benches.

1.4.3.1.1 Elevations sections, numbering, colors, details, and anchorages/ attachments to other work.

1.4.3.2 Details of anchoring components and methods for project conditions.

1.4.3.2.1 Identify components required for installation, but not supplied by locker manufacturer.

1.4.4 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and finish.

1.4.5 Manufacturer's Certificates: Certify products meet or exceed specified requirements.

** NOTE TO SPECIFIER ** Delete the following paragraphs if LEED not applicable or delete all if LEED credits are not required.

1.4.6 LEED Product Data for Credit MR 4.1 and MR 4.2: For products having recycled content, documentation including percentages by weight of post consumer and preconsumer recycled content.

1.4.7 LEED Product Data for Credit EQ 4.1: For adhesives used to laminate gypsum board panels to substrates, including printed statement of VOC content.

1.4.8 LEED Product Data for Credit MR 5.1 and Credit MR 5.2: Submit data, including location and distance from Project of material manufacturer and point of extraction, harvest or recovery for main raw material.

1.4.9 Closeout Submittals: Provide manufacturer's executed warranty and manufacturer's maintenance instructions that include recommendations for periodic cleaning and maintenance of all components.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Manufacturer shall have been in the business of manufacturing HDPE Lockers for a minimum of five years.

1.5.2 Installer Qualifications: Installers shall be certified by the manufacturer of the lockers being used on this project.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.5.3 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1.5.3.1 Finish areas designated by Architect.

1.5.3.2 Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.

1.5.3.3 Refinish mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE, AND HANDLING

1.6.1 Deliver and store products in manufacturer's original unopened packaging in accordance with manufacturer's instructions until ready for installation.

1.6.2 Store materials indoors, protected from the elements and construction hazards.

1.6.3 Handle materials in a manner that will protect the finished product.

1.7 SEQUENCING

1.7.1 Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.

1.7.2 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8 PROJECT CONDITIONS

1.8.1 Field Measurements:

1.8.1.1 Verify dimensions for installation by field measurements prior to fabrication and indicate measurements on Shop Drawings.

1.8.1.2 If field measurements cannot be made without delaying the Work, establish dimensions and fabricate units without field measurements. Coordinate supports, adjacent construction, and fixture locations to ensure actual dimensions correspond to established dimensions.

1.8.2 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.9 WARRANTY

1.9.1 Provide manufacturer's 10 year written limited warranty against breakage, corrosion, delamination and defects in workmanship and material. Warranties are to be signed by an authorized manufacturer representative.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Summit Lockers, which is located at: 138 McLeod Rd.; Columbia, SC 29203; Toll Free Tel: 888-310-7149; Tel: 803-403-8816; Fax: 877-828-2142; Email:request info (); Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 PERFORMANCE REQUIREMENTS

2.2.1 Physical Properties, HDPE Lockers:

2.2.1.1 Screw Holding Strength per ASTM D 1037: Direct screw withdrawal test; HDPE material shall withstand a direct pull force that exceeds 1,100 lbs (499 kg) per fastener.

2.2.1.2 Tensile Strength: HDPE material.

2.2.1.2.1 Tensile Modulus: 339,000 lbs per sq in (2,337,323 kPa).

2.2.1.2.2 Tensile Strength at Yield: 4500 lbs per sq in (1,026 kPa).

2.2.1.2.3 Tensile Strength at Break: 2030 lbs per sq in (13,996 kPa).

2.2.1.3 Flexural Properties per ASTM D 790: Locker materials shall have a Flexural Modulus of 235,000 lbs per sq in (1,620,268 kPa).

2.2.1.4 Environmental Stress-Crack Resistance per ASTM D 1693: HDPE material shall exceed 15.0 HR.

2.2.1.5 Water Absorption per ASTM D 570: Water Absorption Rate less than 0.09 percent.

2.2.1.6 Accessibility Requirements: Comply with ADA requirements and authorities having jurisdiction.

2.2.1.7 Deterioration and Discoloration Resistance: Testing in accordance with corrosion-testing procedure established by The United States Plastic Corporation.

2.2.1.7.1 Solid plastic components shall resist deterioration and discoloration when subjected to the following chemicals:

2.2.1.7.1.1 Acetic Acid 80, Borax, Hydrochloric Acid 40, Soaps, Ammonium Phosphate, Citric Acid, Hydrogen Peroxide 30, Potassium Bromide, Acetone, Caustic Soda, Isopropyl Alcohol, Trisodium Phosphate, Bleach 12, Cooper Chloride, Lactic Acid 25, Sodium Bicarbonate, Ammonia Liquid, Chlorine Water, Nicotine, Urea and Urine, Brine, Core Oils, Lime Sulfur, and Vinegar.

** NOTE TO SPECIFIER ** Delete article if not required.

2.3 HDPE LOCKERS

2.3.1 Provide the following configurations to the overall dimension as indicated on the Drawings.

** NOTE TO SPECIFIER ** Delete locker types not required.

2.3.1.1 Lockers: One Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.1.1 Height: 24 in (610 mm).

2.3.1.1.2 Height: 36 in (914 mm).

2.3.1.1.3 Height: 48 in (1219 mm).

2.3.1.1.4 Height: 60 in (1524 mm).

2.3.1.1.5 Height: 72 in (1829 mm).

2.3.1.1.6 Height: 84 in (2134 mm).

2.3.1.1.7 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.1.8 Width: 9 in (229 mm).

2.3.1.1.9 Width: 12 in (305 mm).

2.3.1.1.10 Width: 15 in (381 mm).

2.3.1.1.11 Width: 18 in (457 mm).

2.3.1.1.12 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.1.13 Depth: 12 in (305 mm).

2.3.1.1.14 Depth: 15 in (381 mm).

2.3.1.1.15 Depth: 18 in (457 mm).

2.3.1.1.16 Depth: 20 in (508 mm).

2.3.1.2 Lockers: Two Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.2.1 Height: 24 in (610 mm).

2.3.1.2.2 Height: 36 in (914 mm).

2.3.1.2.3 Height: 48 in (1219 mm).

2.3.1.2.4 Height: 60 in (1524 mm).

2.3.1.2.5 Height: 72 in (1829 mm).

2.3.1.2.6 Height: 84 in (2134 mm).

2.3.1.2.7 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.2.8 Width: 9 in (229 mm).

2.3.1.2.9 Width: 12 in (305 mm).

2.3.1.2.10 Width: 15 in (381 mm).

2.3.1.2.11 Width: 18 in (457 mm).

2.3.1.2.12 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.2.13 Depth: 12 in (305 mm).

2.3.1.2.14 Depth: 15 in (381 mm).

2.3.1.2.15 Depth: 18 in (457 mm).

2.3.1.2.16 Depth: 20 in (508 mm).

2.3.1.3 Lockers: Three Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.3.1 Height: 24 in (610 mm).

2.3.1.3.2 Height: 36 in (914 mm).

2.3.1.3.3 Height: 48 in (1219 mm).

2.3.1.3.4 Height: 60 in (1524 mm).

2.3.1.3.5 Height: 72 in (1829 mm).

2.3.1.3.6 Height: 84 in (2134 mm).

2.3.1.3.7 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.3.8 Width: 9 in (229 mm).

2.3.1.3.9 Width: 12 in (305 mm).

2.3.1.3.10 Width: 15 in (381 mm).

2.3.1.3.11 Width: 18 in (457 mm).

2.3.1.3.12 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.3.13 Depth: 12 in (305 mm).

2.3.1.3.14 Depth: 15 in (381 mm).

2.3.1.3.15 Depth: 18 in (457 mm).

2.3.1.3.16 Depth: 20 in (508 mm).

2.3.1.4 Lockers: Four Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.4.1 Height: 36 in (914 mm).

2.3.1.4.2 Height: 48 in (1219 mm).

2.3.1.4.3 Height: 60 in (1524 mm).

2.3.1.4.4 Height: 72 in (1829 mm).

2.3.1.4.5 Height: 84 in (2134 mm).

2.3.1.4.6 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.4.7 Width: 9 in (229 mm).

2.3.1.4.8 Width: 12 in (305 mm).

2.3.1.4.9 Width: 15 in (381 mm).

2.3.1.4.10 Width: 18 in (457 mm).

2.3.1.4.11 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.4.12 Depth: 12 in (305 mm).

2.3.1.4.13 Depth: 15 in (381 mm).

2.3.1.4.14 Depth: 18 in (457 mm).

2.3.1.4.15 Depth: 20 in (508 mm).

2.3.1.5 Lockers: Five Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.5.1 Height: 48 in (1219 mm).

2.3.1.5.2 Height: 60 in (1524 mm).

2.3.1.5.3 Height: 72 in (1829 mm).

2.3.1.5.4 Height: 84 in (2134 mm).

2.3.1.5.5 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.5.6 Width: 9 in (229 mm).

2.3.1.5.7 Width: 12 in (305 mm).

2.3.1.5.8 Width: 15 in (381 mm).

2.3.1.5.9 Width: 18 in (457 mm).

2.3.1.5.10 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.5.11 Depth: 12 in (305 mm).

2.3.1.5.12 Depth: 15 in (381 mm).

2.3.1.5.13 Depth: 18 in (457 mm).

2.3.1.5.14 Depth: 20 in (508 mm).

2.3.1.6 Lockers: Six Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.6.1 Height: 48 in (1219 mm).

2.3.1.6.2 Height: 60 in (1524 mm).

2.3.1.6.3 Height: 72 in (1829 mm).

2.3.1.6.4 Height: 84 in (2134 mm).

2.3.1.6.5 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.6.6 Width: 9 in (229 mm).

2.3.1.6.7 Width: 12 in (305 mm).

2.3.1.6.8 Width: 15 in (381 mm).

2.3.1.6.9 Width: 18 in (457 mm).

2.3.1.6.10 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.6.11 Depth: 12 in (305 mm).

2.3.1.6.12 Depth: 15 in (381 mm).

2.3.1.6.13 Depth: 18 in (457 mm).

2.3.1.6.14 Depth: 20 in (508 mm).

2.3.1.7 Lockers: Z Tier. Full overlay doors.

** NOTE TO SPECIFIER ** Delete height options not required.

2.3.1.7.1 Height: 48 in (1219 mm).

2.3.1.7.2 Height: 60 in (1524 mm).

2.3.1.7.3 Height: 72 in (1829 mm).

2.3.1.7.4 Height: 84 in (2134 mm).

2.3.1.7.5 Height: 96 in (2438 mm).

** NOTE TO SPECIFIER ** Delete width options not required.

2.3.1.7.6 Width: 9 in (229 mm).

2.3.1.7.7 Width: 12 in (305 mm).

2.3.1.7.8 Width: 15 in (381 mm).

2.3.1.7.9 Width: 18 in (457 mm).

2.3.1.7.10 Width: 20 in (508 mm).

** NOTE TO SPECIFIER ** Delete depth options not required.

2.3.1.7.11 Depth: 12 in (305 mm).

2.3.1.7.12 Depth: 15 in (381 mm).

2.3.1.7.13 Depth: 18 in (457 mm).

2.3.1.7.14 Depth: 20 in (508 mm).

2.3.1.8 Athletic Lockers:

** NOTE TO SPECIFIER ** Delete dimension option not required.

2.3.1.8.1 Dimensions (in/mm): ______.

2.3.1.8.2 Dimensions: As detailed on the Drawings.

** NOTE TO SPECIFIER ** Delete under seat configuration options not required.

2.3.1.8.3 Under-Seat Configuration: Open

2.3.1.8.4 Under-Seat Configuration: Pull out drawer

2.3.1.8.5 Under-Seat Configuration: Lift seat with under seat storage, and lockable hasp.

** NOTE TO SPECIFIER ** Delete top compartment options not required.

2.3.1.8.6 Top Compartment: Open.

2.3.1.8.6.1 Charging station.

2.3.1.8.7 Top Compartment: Partial lockable

2.3.1.8.7.1 Charging station.

2.3.1.8.8 Top Compartment: Full width lockablecharging station.

2.3.1.8.8.1 Charging station.

** NOTE TO SPECIFIER ** Optional. Delete if not required.

2.3.1.8.9 Additional Storage: Combine athletic lockers with storage and/or coat lockers.

2.3.2 Panel Material:

2.3.2.1 HDPE: Polymer resin formed under high pressure to solid plastic components or required thickness with a homogenous color. Surface and edges shall be nonporous. Provide material selected for uniform color, surface flatness and even texture. Exposed surfaces that exhibit discolorations, pitting, seam marks, roller marks, stains, telegraphing, or other imperfections on finished units are not acceptable.

2.3.2.2 Sides, Shelves, Tops and Bottoms: 3/8 in (9.5 mm) thick.

2.3.2.3 Doors and Door Frames: 1/2 in (13 mm) thick.

** NOTE TO SPECIFIER ** Delete fire resistance option if not required.

2.3.2.4 Fire Rating: Core or panel material meeting fire Class A resistance per ASTM E84.

2.3.2.5 Finish: For tops, bottoms, side walls, shelves and frames; commercial grade smooth in the color white. Doors; slightly textured to reduce marring.

** NOTE TO SPECIFIER ** Delete color options not required. Custom colors are possible. Contact manufacturer for more details.

2.3.2.6 Color: Forrest Green.

2.3.2.7 Color: Burgundy.

2.3.2.8 Color: Blueberry.

2.3.2.9 Color: Mocha.

2.3.2.10 Color: Black.

2.3.2.11 Color: Vivid Red.

2.3.2.12 Color: Military Gray.

2.3.2.13 Color: Dove Gray.

2.3.2.14 Color: Glacier Gray.

2.3.2.15 Color: Bone.

2.3.2.16 Color: As determined by the Architect from manufacturer's selection.

2.3.3 Locker Body Construction:

2.3.3.1 Locker Components: Fabricate square and rigid, with finish free from scratches and chips.

2.3.3.2 Joint Construction; Solid Plastic Components: Dado joined to provide a continuous, solid and secure joint that slides together for assembly.

2.3.3.3 Locker Sides and Backs: Form a one-piece unit constructed from a single sheet of solid plastic requiring no hardware.

2.3.3.4 Door Frames shall be bonded to locker bodies using plastic welding process.

2.3.3.5 Exposed Edges: Straight profile; eased edges to remove sharpness.

** NOTE TO SPECIFIER ** Delete athletic locker side options not required or delete all of them if athletic lockers are not being specified.

2.3.3.5.1 Athletic Locker Sides: Square.

2.3.3.5.2 Athletic Locker Sides: Curve, stylized.

2.3.3.5.3 Athletic Locker Sides: Deeper seating.

2.3.3.6 Wall Mounting Cleats: Minimum 3/8 in (9.5 mm) thick HDPE.

2.3.4 Ventilation

2.3.4.1 Vertical Ventilation: Six, 5/16 in (8 mm) diameter ventilation holes on tops, bottoms, and intermediate shelves. Three 5/16 in (8 mm) diameter ventilation holes on "Z" type intermediary shelves.

2.3.4.2 Horizontal ventilation: Ventilation around edge of door equal to 1.43 sq in (922.6 sq mm) of ventilation surface area per linear foot of door perimeter.

** NOTE TO SPECIFIER ** Delete additional door ventilation option not required or delete both.

2.3.4.3 Additional Door Ventilation: Through door ventilation with 5/16 in (8 mm) holes drilled into a horizontal or vertical pattern. 50 percent additional ventilation.

2.3.4.4 Additional Door Ventilation: Through door ventilation with 5/16 in (8 mm) holes drilled into a horizontal or vertical pattern. 100 percent additional ventilation.

2.3.5 Hardware:

2.3.5.1 Fasteners: Stainless steel.

** NOTE TO SPECIFIER ** Delete fastening option not required. Concealed is standard.

2.3.5.1.1 Fastening: Concealed.

2.3.5.1.2 Fastening: Through bolt door.

2.3.5.2 Door Hinge: Continuous and integrate into the full length of the door and main locker body, made entirely from plastic without any steel or metal parts.

2.3.5.3 Coat Hooks: Molded solid plastic, two prong hook. Attach using manufacturer supplied hardware. One per opening.

2.3.5.4 Door Identification Plates: 1.75 x 6.25 in (44.5 x 159 mm) black plastic with reverse engraved numbers and surface mounted with permanent adhesive.

2.3.5.4.1 Fonts: 1/2 in (13 mm) high minimum; up to four characters.

2.3.5.4.2 Numbering Sequence: Provided by the Architect.

2.3.5.5 Continuous Latch: Finger-slide latching mechanism that can accept a padlock and is securely fastened to door. Latch mechanism attaches to the entire length of the door, providing a continuous security latch.

** NOTE TO SPECIFIER ** Delete paragraph if not required. Or delete subparagraphs not required.

2.3.6 Accessories and Options:

** NOTE TO SPECIFIER ** Delete finished locker top options if not required.

2.3.6.1 Finished Locker Top: Standard. White body material.

2.3.6.2 Finished Locker Top: Flat. 1/2 in (13 mm) thick. Top color to match lockers.

2.3.6.3 Finished Locker Top: Sloped. 1/2 in (13 mm) thick. Top color to match lockers. 20 degree rise from front to back, using an extruded aluminum channel across the front.

** NOTE TO SPECIFIER ** Optional. Delete if not required.

2.3.6.4 Door magnets.

2.3.6.5 Coat Rod: Stainless steel. Installed in locker openings greater than 30 in (762 mm) high and 18 in (457 mm) deep.

2.3.6.6 Adjustable Locker Base: Adjustable locker feet with 1/2 in (13 mm) solid HDPE kick plate. Color to match with lockers. Adjustable Range: 3-3/4 to 5 in (95 x 127 mm).

** NOTE TO SPECIFIER ** Delete paragraph if athletic lockers are not being specified. Otherwise delete accessories not required.

2.3.6.7 Athletic Lockers:

2.3.6.7.1 Engraved logos.

2.3.6.7.2 Decorative valances.

2.3.6.7.3 Name tags.

** NOTE TO SPECIFIER ** Delete article if not required.

2.4 HDPE PEDESTAL BENCHES

2.4.1 Panel Material:

2.4.1.1 HDPE: Polymer resin formed under high pressure to solid plastic components or required thickness with a homogenous color. Surface and edges shall be nonporous. Provide material selected for uniform color, surface flatness and even texture. Exposed surfaces that exhibit discolorations, pitting, seam marks, roller marks, stains, telegraphing, or other imperfections on finished units are not acceptable.

** NOTE TO SPECIFIER ** Delete fire resistance option if not required. Class B is standard.

2.4.1.2 Fire Rating: Core or panel material meeting fire Class A resistance per ASTM E84.

2.4.2 HDPE benches mounted on pedestals.

** NOTE TO SPECIFIER ** Delete bench type not required.

2.4.2.1 Bench (WxT): 12 x 3/4 in (305 x 19 mm) thick HDPE.

2.4.2.1.1 Lengths: As indicated on the Drawings.

** NOTE TO SPECIFIER ** Delete pedestal option not required.

2.4.2.1.2 Pedestals: Stainless steel.

2.4.2.1.3 Pedestals: Powder coated steel.

** NOTE TO SPECIFIER ** Delete bench length option not required.

2.4.2.1.4 Bench Length (in/mm): ______.

2.4.2.1.5 Bench Length: As determined by the Architect.

2.4.2.2 ADA Bench:

2.4.2.2.1 Dimensions (WxLxT): 20 x 42 x 3/4 in (508 x 1067 x 19 mm) thick HDPE.

2.4.2.2.2 Dimensions (WxLxT): 24 x 48 x 3/4 in (610 x 1219 x 19 mm) thick HDPE.

** NOTE TO SPECIFIER ** Delete ADA pedestal options not required.

2.4.2.2.3 ADA Pedestals: 4, stainless steel pedestals.

2.4.2.2.4 ADA Pedestals: 4, aluminum, black powder coated for 20 x 42 in (508 x 1067 mm) benches

2.4.2.2.5 ADA Pedestals: 4, aluminum, black powder coated 24 x 48 in (610 x 1219 mm) benches.

** NOTE TO SPECIFIER ** Optional. Available for 24 x 48 in (610 x 1219 mm) ADA benches. Delete if not required.

2.4.2.2.6 Solid HDPE back rests attached with aluminum brackets.

** NOTE TO SPECIFIER ** Delete article if not required.

2.5 CUBBIES

2.5.1 Panel Material:

2.5.1.1 HDPE: Polymer resin formed under high pressure to solid plastic components or required thickness with a homogenous color. Surface and edges shall be nonporous. Provide material selected for uniform color, surface flatness and even texture. Exposed surfaces that exhibit discolorations, pitting, seam marks, roller marks, stains, telegraphing, or other imperfections on finished units are not acceptable.

2.5.1.2 Sides, Shelves, Tops and Bottoms: 3/8 in (9.5 mm) thick.

** NOTE TO SPECIFIER ** Delete fire resistance option if not required. Class B is standard.

2.5.1.3 Fire Rating: Core or panel material meeting fire Class A resistance per ASTM E84.

2.5.2 Configuration:

** NOTE TO SPECIFIER ** Delete paragraphs not required.

2.5.2.1 Single Unit:

** NOTE TO SPECIFIER ** Delete tier options not required.

2.5.2.1.1 Tiers: 1.

2.5.2.1.2 Tiers: 2.

2.5.2.1.3 Tiers: 3.