40
Session 1- Indirect Restorative Materials (Thursday 9th, October, 11 am).
1. Effect of ferrule location on fracture resistance of crowned premolars. A. Samran 1,2*, M. AL-Afandi 2,3, J. Kadour3,4 and M. Kern1 (1Christian-Albrechts University, Kiel, Germany; 2Ibb University, Yemen; 3Alfarabi Dental College, Saudi Arabia; 4Aleppo University, Syria).
2. Evaluation of surface topography of zirconia after Er:YAG laser etching. V. Turp, D. Sen*, G. Akgungor, B. Tuncelli (Istanbul University Faculty of Dentistry, Department of Prosthodontics. Istanbul, Turkey).
3. Synthesis and characterization of Y-TZP/TiO2 composites with different TiO2 contents. R. Miranda 1, V. Ussui 2, D. Lazar 2, J. Marchi 3, W. Miranda 1, P. Cesar* 1 (1 University of São Paulo, Brazil, 2 Institute for Nuclear and Energetic Research, Brazil, 3 Federal University of the ABC, Brazil).
4. Fracture of fibre-reinforced composite crowns versus CAD/CAM alternatives. A.Al-Haddad*, N.Silikas, J.Satterthwaite (University of Manchester,UK).
5. Energy Requirements for Curing Light Activated Cements Through CAD/CAM Materials. N.E. Goetz, C. Shen, J.-F. Roulet* (University of Florida, Department of Restorative Dental Sciences, Gainesville Florida, USA).
6. Bond strength of Y-TZP zirconia ceramic to different core materials. C.R.G. Torres* 1, F.C. Frattes 1, J.B.S. Oliveira 1, C.R. Pucci 1, A.B. Borges 1 (1 Sao Paulo State University – UNESP, Institute of Science and Technology, Department of Restorative Dentistry, Sao Jose Dos Campos, Brazil).
7. Thermal mismatch influence on residual stress in veneer on zirconia. AK. Mainjot 1,2*, Achref Najjar 2, Boris D. Jakubowicz-Kohen2, Michaël J. Sadoun 2 (1 Department of Fixed Prosthodontics, Institute of Dentistry, University of Liège Hospital, Belgium. 2 Unité De Recherches Biomatériaux Innovants Et Interfaces (URB2I-EA4462), Université Paris Descartes, Paris, France).
8. Property of experimental temporary resin-cements made from different resin monomers. Y. Nagasawa*, Y. Hibino, H. Shigeta, H. Nakajima (Meikai University, Japan)
9. Dentin Bond Strength of Two Recent CAD/CAM-Materials after Storage. S. Flury*, S. Z. Schmidt, A. Peutzfeldt, A. Lussi (Department of Preventive, Restorative and Pediatric Dentistry, School of Dental Medicine, University of Bern, Switzerland).
10. BFS of zirconia-based ceramic with veneering porcelain from various manufacturers. N. Chantranikul, P. Salimee * (Chulalongkorn University, Department of Prosthodontics, Bangkok, Thailand)
11. Fracture resistance of teeth restored with built up composite ferrule. U. Puengpaiboon * (Srinakharinwirot University, Department of General Dentistry, Bangkok, Thailand).
12. Vertical misfit of CAD/CAM zirconia and titanium frameworks for prosthesis. E.A. Gomes* 1, R.F. Ribeiro 2, R. Tiossi 3, R.C.S. Rodrigues 2, Y.T. Silva-Sousa 1 (1 University of Ribeirão Preto, School of Dentistry, Ribeirão Preto, Brazil, 2 University of São Paulo, Department of Dental Materials and Prosthodontics, Ribeirão Preto, Brazil, 3 Fluminense Federal University, Department of Prosthodontics, Niterói, Brazil).
13. Bonding ability of experimental light-curing resin-cements to water/ethanol-wet root-dentin. A. Zavattini* 1, V. P. Feitosa 2, F. Mannocci 3, F. Foschi 3, A. Babbar 3, Ottria L 1, F. Mangani 4, S. Sauro 5 (1 Department of Clinical Sciences and Translational Medicine, University of Roma Torvergata, Rome, Italy, 2 Federal University of Ceará,Fortaleza, Brazil, 3 King’S College London Dental Institute at Guy’S Hospital, London, UK, 4 Department of Restorative Dentistry, University of Roma Torvergata, Rome, Italy, 5 Universidad CEU-Cardenal Herrera, Valencia, Spain).
14. Effect of Water Immersion on Monomer and Strength of FRC. W. Siswomihardjo * 1,S. Sunarintyas 1, A.F. Omar Khatab Khan 1, N.S.I. Sahidu 1, J.P. Matinlinna 2 (1 Universitas Gadjah Mada, Indonesia, 2 University of Hong Kong, Hong Kong)
15. Subcritical crack growth in porcelain-zirconia bilayer: an unbonded model. R. Belli 1*, M. Wendler 1, 2, J. I. Zorzin 1, A. Petschelt 1, U. Lohbauer 1 (1 Laboratory for Biomaterials Research, University of Erlangen-Nuremberg, Erlangen, Germany. 2 Department of Restorative Dentistry, Faculty of Dentistry, University of Concepcion, Concepcion, Chile).
16. Fracture analysis of veneered zirconia abutments of screw-retained single crowns. J. Gavric*, O. Moraguez, I. Sailer, H.W.A. Wiskott, S.S. Scherrer (Department of Fixed Posthodontics - Biomaterials, School of Dental Medicine, University of Geneva, Switzerland)
17. Y-TZP Reinforced with Carbon Nanotubes: Synthesis, Microstructure and Flexural Strength. L.H. Silva* 1, R. Belli 2, D.R.R. Lazar 3, R.N. Tango 4, U. Lohbauer 2, P.F. Cesar 1. (1 University of São Paulo - USP, Brazil; 2 University of Erlangen-Nuremberg, Germany; 3 Institute of Energy and Nuclear Research - IPEN, Brazil; 4 São Paulo State University - UNESP, Brazil).
18. Tensile bond strength of cement systems to lithium disilicate ceramic. B. Spaggiari* 1, G. Chiodo2, D. Bernaroli1, P. Bertani3, P. Generali4, M. Mattarozzi5, A. Pirondi6, C. Galli1, M.Bonanini1 (1 Dep. Biomedical, Biotechnological and Translational Sciences, University of Parma, Parma, Italy; 2 Centrositeia.Parma, University of Parma; 3Private Practice, Parma, Italy; 4 Private Practice, Piacenza, Italy; 5Dep. of Chemistry, University of Parma, Parma, Italy; 3Dep. Industrial Engineering, University of Parma, Parma, Italy).
19. Influence of preparation design on fracture strength of ceramic veneers. C. Gutiérrez , C.M. Velho*, L.A. Linhares, L.F. Pottmaier, D.P. Lise, V.C. Ruschel, C.G. Savi, L.N. Baratieri, L.C. Vieira (Federal University of Santa Catarina, Brazil).
20. Z-Prime Plus Improves Bond Strength of RM-GIC on Zirconia. L. Chen, J. Zuffa, H. Shen*, B.I. Suh (Bisco Inc, USA).
21. Critical role of firing temperature on stress deflection of ceramics. MJ Tholey* 1, BA Just 1, V Mercurio 2, M Swain 3, J Fischer 1 4 (1 VITA Zahnfabrik, Bad Säckingen, Germany 2 Expert Systems Solutions, Modena, Italy 3 University of Sydney, Australia 4 Institute for Material Sciences and Engineering, University Hospital of Dental Medicine, University of Basel, Switzerland).
22. Comparison of conventional veneering and CAD/CAM veneering solution method. MJ Tholey 1, BA Just* 1, M Swain 2, J Fischer 1 3 (1 VITA Zahnfabrik, Bad Säckingen, Germany 2 University of Sydney, Australia 3 Institute for Material Sciences and Engineering, University Hospital of Dental Medicine, University of Basel, Switzerland).
23. Effect of endodontic irrigants on long-term intraradicular adhesion of resin-cements. F.Lacerda, F.B. Amaral, R.T.Basting, C.P. Turssi, F.M.G. França*, (São Leopoldo Mandic Institute and Dental Research Center).
24. Analysis of Failure During Shear Testing by Scaling and Fractography. Sultan H, Kazemi R, Kelly JR* (University of Connecticut Health Center, Farmington, CT, USA).
25. Roughness and Microstructural Changes in Y-TZP Laser Treated Before Sintering. A. Verna* 1, P. F. Cesar 1, L. F. Valandro 2, C. Monaco 3, P. Baldissara 3, R. Scotti 3, M. Oda 1. (1 University of São Paulo, BRA, 2 University of Santa Maria, BRA, 3 University of Bologna, IT).
26. Alternative Surface Treatments for Improved Bonding to Ceramic. Lanza MDS1, Lanza FJSR1, Manso AP1, Matinlinna JP2, Carvalho RM1*. (1Department of Oral Biological and Medical Sciences, Faculty of Dentistry, the University of British Columbia, Vancouver, BC, Canada; 2Department of Dental Materials Science, Faculty of Dentistry, the University of Hong Kong, Hong Kong, China).
27. Fracture origins in alumina crowns fractured during clinical function. M. Øilo*1, G.D. Quinn 2 (1 University of Bergen, Faculty of Medicine and Dentistry, Department of Clinical Dentistry, Bergen, Norway, 2 National Institute of Standards and Technology,NIST, USA).
28. Transmission of light through individually formed fiber-reinforced composite post. J.L. Jaatinen*, L.V.J. Lassila, T. Närhi, P.K. Vallittu, A-M. Le Bell-Rönnlöf. (University of Turku, Department of Prosthetic Dentistry, Department of Biomaterials Science and Turku Clinical Biomaterials Centre - TCBC, Turku, Finland).
29. Cervical margin-relocation of CAD/CAM lithium disilicate ceramic crown using resin-composite. G. Marchesi*1,R. Spreafico 2 , A. Frassetto 1, G. Turco 1, R. Di Lenarda 1, M. Cadenaro 1, L. Breschi 3. (1 University of Trieste, Department of Medical Sciences Italy, 2Private Practice, Busto Arsizio Varese, Italy, 3 University of Bologna, Italy.)
30. Adhesion promotion of resin to zirconia by silicon nitride hydrolysis. CYK Lung, DL, JKH Tsoi, JP Matinlinna* (Dental Materials Science, Faculty of Dentistry, the University of Hong Kong, Hong Kong SAR, PR China).
31. The effect of clinical finish on the zirconia roughness surface. J.R.C Queiroz* 1, M.B. Bandeira 1, I.M.S Queiroz 1, B. Henriques 2, A.E. Martinelli 2, S.A. Souza 1, A.F. Neto 1, B.M.F. Pereira 1, A.H.M. Dias 1, A.C. Freitas Junior 1 ( UNP - Laureate University, Brazil, 2 Universidade Federal Do Rio Grande Do Norte, Brazil).
32. Development and evaluation of new extra high translucent Zirconia. M. Yoshinaga*, D. Ohta, T. Sato, F. Fusejima, T. Kumagai (GC Corporation, Tokyo, Japan).
33. Self-Adhesive Resin Cements: In-Vitro Free Expansion Stress, pH-Neutralization and Hydrophilicity. J. Zorzin*, L. Rödel, V. Bednarzig, R. Belli, A. Petchelt, U. Lohbauer (Dental Clinic 1 - Operative Dentistry and Periodontology, University of Erlangen, Germany).
34. Effect of high-power-laser and graphite surface treatements on ceramics bond-strength. C.R. Pucci*1, F.A. Feitosa 1, A.L.F. Loriggio 1, S.A. Feitosa 1, R.M. Araújo 1, F.R. Tay2 (1 Institute of Science and Technology, São Paulo State University, São José Dos Campos, SP, Brazil, 2 College of Dental Medicine, Georgia Health Sciences University, Augusta, GA, USA).
35. Fracture Strength of Artificially Aged Zirconia-Based Crowns. DP Lameira 1, WAB Silva 1, GD De Souza* 2 (1 Faculty of Dentistry, UNICAMP, Brazil; 2 Faculty of Dentistry, University of Toronto, Canada).
36. Different framework materials for implant-supported prostheses: 3D finite element analysis. M. Menini, M. Bevilacqua, F. Pera, S. Bini*, T. Tealdo, P. Pera (Department of Prosthodontics, University of Genoa, Italy).
37. Push-out bond strength of customized fiberglass posts to dentin. T.Y.U. Suzuki* 1, A.G.L. Godas 1, A.P.A. Guedes 2, D.P. Lise 3, J.E. Gomes-Filho 1, A.L.F. Briso 1, W.G. Assunção 1, P.H. Dos Santos 1. (1 Sao Paulo State University, Brazil, 3 Federal University of Espirito Santo, Brazil, 2 Federal University of Santa Catarina, Brazil).
38. Fatigue resistance of Y-TZP/porcelain crowns. S. Pereira*, L.C. Anami 1, J.M.C. Lima 1, L.F. Valandro 2, C.J. Kleverlaan 3, A.J. Feilzer 3, M.A. Bottino 1 (1 Univ Estatual Paulista - UNESP, Brazil; 2 Federal University of Santa Maria, Brazil; 3 Academisch Centrum Tandheelkunde Amsterdam, Netherlads).
39. Bond durability between ceramic-resin cement: silane heat treatment effect. F.P.P Leite* 1, M.G.A.M Chaves 1, A.P.P Leite 1, M.R. Duarte 1, R.F. Carvalho 1, R.L.A. Carvalho 2, E.T. Kimpara 2 (1 University Federal of Juiz De Fora, Brazil, 2 Institute of Science and Technology of São José Dos Campos, UNESP, Brazil).
40. Optimization of Silane Application for CAD/CAM Ceramic Resin Bonding. P. Magne 1, G. Bruzi* 2, A.O. Carvalho 3, R. Enciso 1, M. Giannini 4, H.P. Maia 2 (1 University of Southern California, Restorative Sciences, Los Angeles, USA; 2 Federal University of Santa Catarina, Operative Dentistry, Florianópolis, Brazil; 3 Feira De Santana State University, Integrated Clinical, Feira De Santana, Brazil; 4 Piracicaba Dental School, State University of Campinas, Restorative Dentistry, Piracicaba, Brazil).
41. Curing-mode effects on flexural strength and modulus of resin cements. B. Fronza*, R.R. Pacheco 1, D. Mettenburg 2, F.A. Rueggeberg 2, M. Giannini 1 (1 Department of Restorative Dentistry, Piracicaba Dental School, State University of Campinas, Piracicaba, SP, Brazil 2 Department of Oral Rehabilitation, College of Dental Medicine, Georgia Regents University, Augusta, GA, USA).
42. Mechanical evaluation and Fem/Sem analysis of stress in FPDs. C.Arcuri , P. Pierluigi , V.Vertucci* , F.Balestra . (University of Rome Tor Vergata, IT,).
43. The Influence of Bleaching Agent on Dental Ceramics Surface. L. Vavrickova* 1, A. Krejcova 2(1 Charles University, Faculty of Medicine In Hradec Kralove, Department of Dentistry, Hradec Kralove, Czech Republic, 2 University of Pardubice, Faculty of Chemical Technology, Institut of Environmental and Chemical Engeneering, Pardubice, Czech Republic).
44. Bond Strength of Co-Cr/Ceramic Produced With Three Different Technologies. C. Monaco*, C. Langenohl#, M. Pasquinelli, A. Llukacej, N. Ragazzini, E. Evangelisti, R. Scotti. (University of Bologna, Division of Prosthodontics and Maxillo-Facial Rehabilitation, Department of Biomedical and Neuromotor Sciences, Bologna, Italy. #. Research and Development, Nobil Metal, Villafranca D’Asti , Italy).
45. Bonding to Zirconia and Lithium-Disilicate: Analysis of Different Chemical Treatments. C. Giuliano*, D. Selaj, E. Manzon, D. Pasqualini, E. Berutti, N. Scotti (Dental School Lingotto, Department of Surgical Sciences, Torino, Italy).
46. Residual stress of veneered porcelain by ion beam ring-core method. F. Massimi* 1, M. Sebastiani 1, I. Tredici 2, T. Lucco Castello 2, P. Menghini 2, G. Merlati 2 (1 University of Roma Tre, 2 University of Pavia, Italy).
47. Effect of onium salt and amines on experimental resin cements. A.F. Lima* 1; Andrade K.M. 2; Pallialol A.R. 3; Lancelloti A.C. 3; Goncalves L.S. 4; Consani S. 3; Marchi G.M. 3 (1 Nove De Julho University, Sao Paulo, Brazil; 2 State University of Amazonas, Manaus, Brazil; 3 Piracicaba Dental School, State University of Campinas, Piracicaba, Brazil; 4 School of Dentistry, University of Uberaba, Brazil).
48. Design and heat on flexural strength in 3Y-TZP FDPs. Falk A*1, Vult Von Steyern P 1, Fransson H 1, Molin Thorén M 2 (1 Malmö University, Department of Dental Material Science, Malmö, Sweden and 2 Umeå University, Faculty of Medicine, Department of Prosthetic Dentistry, Umeå, Sweden).
49. Effects of hydrofluoric acid etching on lithium disilicate. G.M. Iorizzo*, F. Prete, B. Mazzanti, G. Timellini, R. Scotti, P. Baldissara (Alma Mater Studiorum University of Bologna, Bologna, Italy).
50. Effect of atmospheric plasma on the bond strength to zirconia. W.M. Negreiros*, V.T.F.S. De Souza, B.B. Lopes, M. Giannini (State University of Campinas, Department of Restorative Dentistry, Piracicaba, Brazil).
51. Micrometric precision of prosthetic dental crowns obtained by CAD/CAM system. K. Zancope *,F.D. Neves 1, T.A.P.N. Carneiro 1, C.J. Prado 1, M.S. Prudente 1, L.R. Davi 1, G. Mendonça 2, C.J. Soares 1 (1 Federal University of Uberlândia, Brazil, 2 University of North Caroline at Chapel Hill, USA)
52. Dimensional Changes Approach of Alginate Impressions. C Sinescu1, M-L Negrutiu1, C Timofte1, A-T Stan*2, A-C Cojocariu2, C Eremia2, M Milos 3 (1-Propaedeutics and Dental Materials Department, Faculty of Dental Medicine, UMF “Victor Babes” Timisoara 2- Dr. Med. Dent., Country Manager – Heraeus Kulzer Romania 3- Dental Technician ).
53. Dentin interaction of multi-mode adhesives to chemical/dual-cured resin cements. M.F. De Goes*1, I.R.Guimarães 1, M.S. Shinohara 2 (1 Piracicaba Dental School, UNICAMP, SP, Brazil, 2 Araçatuba Dental School, UNESP, SP Brazil).
54. Experimental tribo-chemical and silica-rich air-abrasion to enhance bonding to zirconia. A. Darvizeh* 1, A. Abedi-Amin 1, A. Oliveira-Ogliari 2, F. Ogliari 2, R. Moraes 2, V. Feitosa 3. A. Luzi 1, S. Sauro 1 (1 Universidad CEU Cardenal Herrera, Valencia, Spain; 2 Federal University of Pelotas, Pelotas, Brazil; 3 Federal University of Ceará, Fortaleza, Brazil).