National Conference on Recent Trends in Mechanical Engineering

NCRTME 2016

April 28-29, 2016

1

Put paper title here

Author Name
Affiliation
City, State, Country / Author Name
Affiliation
City, State, Country
Author Name
Affiliation
City, State, Country / Author Name
Affiliation
City, State, Country / Author name
Affiliation
City, State, Country

1

Abstract

Put abstract text here.

INTRODUCTION

Early prior research demonstrated the superiority of ceramics for bearings (1, 2) and the existence of elasto-hydrodynamic (ehd) lubricant films at ball and roller contacts (3), the calculation of which is now an accepted partof bearing engineering. These new concepts are now used in the design of lubrication systems with solid lubricantsthat operate in much more severe environments than oils and greases (4, 5). Proprietary computer codes and uniquepatented bearing configurations for optimizing the performance of bearing/solid-lubricant systems have beendeveloped (6, 7 and 8). In this way, patented self-contained solid-lubricated all-steel and hybrid-ceramic ball androller bearings are now available for environments that do not contribute to their lubrication, such as in air orvacuum.

Nomenclature

The paper should be in 2 column. Title of the figure should be outside the figure in text box, with font Times New Roman and size 10 in bold. Same font format should be followed for titles of Table.

*corresponding Author

Wherever figure is described in text, figure should be written as Fig.1. Sub titles should be written in italic,.

Put nomenclature here.

Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here. Put body of the paper here.

Acknowledgments

Put acknowledgments here.

References

Put references here.

1

1