Product Specifications F5D9050
Wireless G Plus MIMO USB Network Adapter
F5D9050 v.3000 (Draft)
Product Specification
Wireless G Plus MIMO USB Network Adapter
Belkin Corporation
Networking Group
501 West Walnut Street
Compton CA, 90220-5221, USA
Table of Contents
1. Introduction……………………………………………………………………...3
2. Product Overview………………………………………………………………..3
2.1 Features…………………………………………………………………3
2.2 System Requirements…………………………….…………………….3
3. Product Hardware………………………………………………………………..3
3.1 Physical Specifications…………………………………………………3
3.2 Chipset Platform………………………………………………………..3
3.3 Host Interface………………………………………………………….3
3.4 Antenna…………………………………………………………………4
3.5 LED Indicators………………………………………………………….4
3.6 Operating Range………………………………………………………..4
3.7 Power Consumption…………………………………………….……...4
3.8 Environment Conditions……………………………………………….4
4. Product Software…………………………………………………………………4
4.1 Drivers………………………………………………………………….4
4.1.1 Modulation……………………………………………………4
4.1.2 Data Rates…………………………………………………….5
4.1.3 Wireless Channels……………………………………………5
4.1.4 Wireless Security……………………………………………..5
4.2 Client Utility……………………………………………………………5
4.2.1 Functions……………………………………………………...5
5. Bill of Materials………………………………………………………………….6
6. Regulatory Certifications………………………………………………………...6
7. Intended Markets…………………………………………………………………7
1. Introduction
This document covers the functional description, specification and deliverables of this project.
2. Product Overview
The Belkin F5D9050 Wireless G Plus MIMO USB Network Adapter is a wireless LAN adapter. The adapter conforms to the IEEE 802.11b/g wireless standards and operates on 2.4GHz frequencies for accessing 802.11b and 802.11g WLAN networks. It features MIMO MRC technology to enhance reception, Range-OVERDRIVE technology to increase range, and Packet-OVERDRIVE technology to increase throughput between products based on the same technologies. The card is designed to work with USB 2.0 compliant system. The adapter’s software driver and utility operate on Microsoft’s Windows 2000 and XP. The product is designed for the home and small office and will be available through major retailers and online retailers.
2.1 Features
USB Interface
Operates on 2.4 frequency band
Conforms to IEEE 802.11b and 802.11g standards
Security supports WPA, WPA2 and WEP Encryption
OS supports Windows 2000 and XP
LED indicators for monitoring network status
Belkin’s Universal Client Utility Interface
2.2 System Requirements
USB slot
64MB memory or greater
300MHz processor or greater
MS Windows 2000 or XP
3. Product Hardware
3.1 Physical Specifications
Dimensions: 4.6mm x 90mm x 33mm (H x L x W PCB only) (TBD)
Weight: x lbs(TBD)
3.2 Chipset Platform
Ralink RT2571WF+RT2528
3.3 Host Interface
2.0 USB Interface
3.4 Antenna
Dual on-board antennas with 2 dBi antenna gain (TBC)
3.5 LED Indicators
Link:Solid Green - linked to network
Off – not connected to network
Activity Blinking Green - data is transferring
Off – no data being transferred
3.6 Operating Range
Indoor: 250ft
Outdoor: 1000ft
3.7 Power Consumption
802.11b:TBD
802.11g:TBD
3.8 Environment Conditions
Temperature Range:Operating - 0 ~ 60 C
Storing - 20 ~ 80 C
Humidity: Operating – 10 ~ 85% non-condensing
Storing – 5 ~ 90% non-condensing
4. Product Software
4.1 Drivers
4.1.1 Modulation
802.11b:CCK (11 Mbps, 5.5 Mbps)
DQPSK (2 Mbps) DBPSK (1 Mbps)
802.11g:OFDM
4.1.2 Data Rates
802.11b:11, 5.5, 2, 1 Mbps
< 1Mbps XR (Auto fallback for extended range)
802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Auto fallback for extended range
4.1.3 Wireless Channels
802.11b/gNorth America 1-11
Europe 1-13
Australia 1-11
Most of Asia 1-13
4.1.4 Wireless Security
802.11b/g WPA & WPA2 – AES, TKIP
WEP – 64-, 128-bit
4.2 Client Utility (See Belkin Universal Client Utility spec for more detail)
4.2.1 Functions
Current Status Tab:
Signal Strength – provides an indicator for signal strength.
Wireless Information – provides current status information on connected to network, network type, channel, encryption, link speed.
IP information – provides current status information on DHCP status, current IP, subnet mask, default gateway and DNS server.
Site Survey – provides network name, signal, security, type, band, channel and mac address of the current networks within the area.
Connect – connects to the selected network
Refresh – refreshes the status of the networks within the area
My Connections Tab:
Profile History – list all the networks that have been connected
Add/Edit/Delete options – create/remove profiles
Options Tab:
Program choice – toggle between XP or Belkin’s UI
Automatic connections – automatically tries to connect to any open network in range.
Icon – shows program icon in system tray
Help Tab:
Built-in help – troubleshooting tool
Online support – website featuring latest downloads and FAQs
Telephone support – tech support numbers for worldwide
Advanced tools – advanced diagnostics tool
5. Bill of Materials
Wireless G Plus MIMO USB Network Adapter
Base Stand with USB cable attached
CD-ROM
User Manual
Quick Install Guide
6. Regulatory Certifications
US:FCC B ID (EMC & Wireless)
Canada:ICES (EMC & Wireless)
Europe: ETS 300 328, ETS 300 836 (Wireless)
EN50081, 50082, 60950, 61000-3-2, 61000-3-3 (EMC)
RoHS
Australia:C-Tick (EMC)
Worldwide:Wi-Fi, WHQL
7. Intended Markets
North America: USA
Canada
Mexico
Europe:United Kingdom
France
Spain
Italy
Germany
Netherlands
Asia / Pacific:Australia
Singapore
China
Taiwan
Korea
Japan
1
Belkin CorporationConfidential
Networking Group