September 2012
AmericasBosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450,
USA
Phone: + 1 800 289 0096
Fax: +1 585 223 9180
www.boschsecurity.us / Europe, Middle East, Africa
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
www.boschsecurity.com / Asia-Pacific
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2600
Fax: +65 6571 2698
www.boschsecurity.com
Product Guide Specification
SECTION 28 23 29
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
BOSCH MIC SERIES 440 EXPLOSION-PROTECTED CAMERA
PART 1 – GENERAL
1.1 SUMMARY
A. Section Includes
1. Video Surveillance Remote Devices
B. Related Sections
1. Section [28 23 13 – Video Surveillance Control and Management Systems].
2. Section [28 23 16 – Video Surveillance Monitoring and Supervisory Interfaces].
3. Section [28 23 19 – Digital Video Recorders and Analog Recording Devices].
4. Section [28 23 23 – Video Surveillance Systems Infrastructure].
**********Specifier’s note: Include those standards referenced elsewhere in this SECTION.
1.2 REFERENCES
A. Canadian Standards Association (CSA)
1. CAN/CSA E60950-1 Information Technology Equipment Safety.
B. European Norm
1. EN 50130-4 Alarm Systems - Electromagnetic Compatibility - Product Family Standard: Immunity Requirements For Components Of Fire, Intruder And Social Alarm Systems.
2. EN 55022 class A (CE) – Information Technology Equipment – Radio Disturbance Characteristics – Limits and Methods of Measurement for Emission.
3. EN 55024 Information Technology Equipment (CE) – Immunity Characteristics – Limits and Methods of Measurement.
4. EN 61000-3-2 (CE) Electromagnetic Compatibility – Limits for Harmonic Current Emissions.
5. EN 61000-3-3 (CE) Electromagnetic Compatibility – Limits – Limitation of Voltage Changes, Voltage Fluctuations and Limitation of Voltage.
6. ICES-003 – Spectrum Management and Telecommunications Policy
7. Interference-Causing Equipment Standard
C. Explosion Protection
1. ATEX Certified: Directive 94/9/EC Exd IIC T6
2. Brazil: INMETRO NCC4939/08 X Exd IIC T6
3. CSA, C/US:
a. Class I, Division 1, Groups CD
b. Class II, Division 1, Groups EFG
c. Temperature Code T6
4. IECEx SIR: 11.0023X
D. Federal Communications Commission (FCC) (www.fcc.gov)
1. FCC CFR 47 part 15 – Telecommunications – Radio Frequency Devices – Digital Device Emission.
E. International Electrotechnical Commission (IEC)
1. IEC 60950 Information Technology Equipment – Safety.
F. International Organization for Standardization (ISO)
1. 9001 – Quality System.
G. Safety
1. Complies with CE regulations (Sira examination, Issue 9)
2. Complies with UL standards
3. Complies with EN standards
4. Complies with IEC standards
1.3 SYSTEM DESCRIPTION
A. Video Surveillance Remote Devices
1. Explosion-Protected Extreme Series PTZ Color CCD camera
B. Performance Requirements
1. Explosion protected unit certified to ATEX Directive 94/9/EC Exd IIC T6.
2. CSA and INMETRO certified.
3. IP 68 rating.
4. Integrated wiper.
1.4 SUBMITTALS
A. Submit under provisions of Section [01 33 00.]
B. Product Data:
1. Manufacturer’s data, user and installation manuals for all equipment and software programs including computer equipment and other equipment required for complete video management system.
C. Shop Drawings; include
1. System device locations on architectural floor plans.
2. Full Schematic of system, including wiring information for all devices.
D. Closeout Submittals
1. User manual.
2. Parts list.
3. System device locations on architectural floor plans.
4. Wiring and connection diagram.
5. Maintenance requirements.
1.5 QUALITY ASSURANCE
A. Manufacturer:
1. Minimum of [10] years experience in manufacture and design Video Surveillance Devices.
2. Manufacturer’s quality system: Registered to ISO 9001 Quality Standard.
B. Video Surveillance System
1. Listed by [UL] [EN] [FCC] specifically for the required loads. Provide evidence of compliance upon request.
C. Installer:
1. Minimum of [5] years experience installing Video Surveillance System.
1.6 DELIVERY, STORAGE AND HANDLING
A. Comply with requirements of Section [01 60 00].
B. Deliver materials in manufacture’s original, unopened, undamaged containers; and unharmed original identification labels.
C. Protect store materials from environmental and temperature conditions following manufacturer’s instructions.
D. Handle and operate products and systems according to manufacturer’s instructions.
E. Bosch provides off-the-shelf availability for our top selling products and same-day or 24-hour shipping.
1.7 WARRANTY
A. Provide manufacturer’s warranty covering [3] years for replacement and repair of defective equipment.
1.8 MAINTENANCE
A. Make ordering of new equipment for expansions, replacements, and spare parts available to dealers and end users.
B. Provide factory direct technical support from 8:00 a.m. to 8:00 p.m. via phone and e-mail.
PART 2 – PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer:
[Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 1450, USA
Phone: + 1 800 289 0096
Fax: + 1 585 223 9180
www.boschsecurity.us]
[Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
www.boschsecurity.com]
[Asia-Pacific
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
www.boschsecurity.com]
B. Substitutions: [Not permitted.] [Under provisions of Division 1.]
1. [All proposed substitutions must be approved by the Architect or Engineer professional.]
2. [Proposed substitutions must provide a line-by-line compliance documentation.]
**********Specifier’s note: Select Camera System Series based on project requirement.
2.2 BOSCH MIC SERIES 440 EXPLOSION-PROTECTED CAMERA
A. General Requirements:
1. [The explosion-protected PTZ camera shall be a MIC Series 440 PTZ camera rated to IP68 / NEMA 4x with a high resolution 18x true day/night camera.]
2. [The explosion-protected PTZ camera shall be a MIC Series 440 PTZ camera rated to IP68 / NEMA 4x with a high resolution 36x true day/night camera.]
3. The explosion-protected PTZ camera shall be environmentally rated to IP68 / NEMA 4x.
4. The explosion-protected PTZ camera shall operate from -20° to +60°C (-4° to 160°F) temperature, up to hurricane force wind conditions (above190 mph winds), and underwater to a depth of 1 meter.
5. The explosion-protected PTZ camera shall be machined from 6 mm thick solid aluminum.
6. The explosion-protected PTZ camera shall be corrosion-resistant by using an Alochrom 1200 coating then a robust polyester powder paint coating.
7. The explosion-protected PTZ camera shall be available in black (RAL9005) or white (RAL9003).
8. The explosion-protected PTZ camera shall have the ability to be mounted upright or inverted
9. The explosion-protected PTZ camera shall be no more than
16 kg (35.3 lb) in weight.
10. The explosion-protected PTZ camera shall comply with ROHS, CE and FCC standards
11. The explosion-protected PTZ camera shall have dimensions of
286(W) x 523.6(H) x 189(D) mm (11.26 x 20.61 x 7.44 in.).
12. The explosion-protected PTZ camera shall feature an optically perfect, flat viewing window
13. All weatherproof seals within the explosion-protected PTZ camera shall last for the 3yr warranty period of the unit without need for maintenance or replacement
14. The explosion-protected PTZ camera shall be supplied with an attached 4-inch PCD base as standard with pre-drilled hole suitable for a safety chain
15. The explosion-protected PTZ camera shall be capable of full operation at a composite cable length of 25 meters maximum between PTZ camera head and the power supply.
16. The explosion-protected PTZ camera shall have an integrated wiper with replaceable wiper blade
17. The explosion-protected PTZ camera shall comply with ATEX Directive 94/9/EC Exd IIC T6 Power supply module options meet site specific installation requirements (indoor or outdoor) and protection against unexpected surges in power.
B. Pan/Tilt Drive
1. The explosion-protected PTZ camera shall feature precision brushed motor technology for its pan/tilt drive
2. The pan/tilt drive speed shall range from 0.2º per second to 90º per second.
3. The explosion-protected PTZ camera shall be capable of 360º continuous rotation pan and 320º tilt.
4. The explosion-protected PTZ camera shall utilize resolver positioning technology.
5. The explosion-protected PTZ camera shall have a pan and tilt position accuracy of greater than 0.08º.
C. Connectivity
1. The explosion-protected PTZ camera shall supply video, power and telemetry through a multi-core cable.
2. The explosion-protected PTZ camera shall offer an IP68 connection.
D. Camera Specifications
1. 18x Camera Module
a. The camera module shall feature a 1/4-inch Exview CCD.
b. The camera module shall be a true day/night unit.
c. The camera module shall switch from day mode (color) to night mode (monochrome) via a photocell integrated into the PTZ camera head that can be set to user selectable levels, or via a remote keyboard.
d. The camera module shall have a resolution of 470 TVL (NTSC/PAL).
e. The camera module shall have an 18x optical zoom with 12x digital zoom.
f. The camera module shall have a minimum illumination sensitivity of
1) 0.7 lux (F1.4, 1/60s NTSC, 1/50s PAL)
2) 0.11 lux (F1.4, 1/4s NTSC, 1/3s PAL)
3) 0.01 lux or less (F1.4, 1/4s NTSC, 1/3s PAL, ICR ON)
g. The camera module shall have selectable on/off Backlight Compensation (BLC).
h. The camera module shall have 16 steps aperture control.
i. The camera module shall have Automatic Gain Control (AGC) from -3 to -28 dB in 2 dB steps.
j. The camera module shall feature an automatic mechanical IR cut-filter.
k. The camera module shall have a signal to noise ration of greater than 50 dB.
l. The camera module shall use Internal / External (V-Lock) synchronization.
m. The camera module shall have a lens that performs to F=4.1 mm (WIDE) to 73.8 mm (TELE), F1.4 to F3.0.
n. The camera module shall have an angle of view of 48º (WIDE end) to 2.8º (TELE end).
o. The camera module shall have a shutter speed of 1/1 to 1/10,000s (22 steps) NTSC and PAL.
p. The camera module itself shall have up to 10 selectable settings that can be mapped to a preset on the remote keyboard, including shutter speed and color control for ANPR applications.
2. 36x Camera Module
a. The camera module shall feature a 1/4-inch EXview™ CCD.
b. The camera module shall be a true day/night unit.
c. The camera module shall switch from day mode (color) to night mode (monochrome) via the remote keyboard.
d. The camera module shall have a resolution of 470 TVL (NTSC/PAL).
e. The camera module shall have an 36x optical zoom with 12x digital zoom.
f. The camera module shall have a minimum illumination sensitivity of
1) 1.4 lux (1/60s NTSC, 1/50s PAL)
2) 0.1 lux (1/4s NTSC, 1/3s PAL)
3) 0.01 lux or less (1/4s NTSC, 1/3s PAL, ICR ON)
g. The camera module shall have selectable on/off Backlight Compensation (BLC).
h. The camera module shall have 16 steps aperture control.
i. The camera module shall have Automatic Gain Control (AGC) from -3 to -28 dB in 2 dB steps.
j. The camera module shall feature an automatic mechanical IR cut-filter.
k. The camera module shall have a signal to noise ration of greater than 50 dB.
l. The camera module shall use Internal / External (V-Lock) synchronization.
m. The camera module shall have a lens that performs to 3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to F4.5.
n. The camera module shall have an angle of view of 57.8º (WIDE end) to 1.7º (TELE end).
o. The camera module shall have a shutter speed of:
1) NTSC: 1/4 to 1/10,000s (20 steps)
2) PAL: 1/3 to 1/10,000s (20 steps)
p. The camera module itself shall have up to 10 selectable settings that can be mapped to a preset on the remote keyboard, including shutter speed and color control for ANPR applications.
E. Operational Design and Performance
1. The explosion-protected PTZ camera shall have 64 telemetry presets.
2. The explosion-protected PTZ camera shall have preset titles of 20 characters for each preset.
3. The explosion-protected PTZ camera shall have 6 tours, each with 32 preset positions.
4. The explosion-protected PTZ camera shall have a random tour function.
5. The explosion-protected PTZ camera shall have 64 sector titles, each with 20 characters.
6. The explosion-protected PTZ camera shall have the ability to select a home position.
F. Electrical Design and Performance
1. Total power consumption of the standard camera shall be no more than 25.2 W.
2. The explosion-protected PTZ camera shall have available a Bosch power supply providing +18 VDC from one of the following input voltages:
a. 24 VAC
b. 115 VAC
c. 240 VAC
3. The explosion-protected PTZ camera shall be fitted with control PCB’s including a control processor, voltage regulator, brushless motor drives.
G. Software Specifications
1. The explosion-protected PTZ camera shall be compatible with American Dynamics protocol.
2. The explosion-protected PTZ camera shall be compatible with Pelco P / Pelco D protocol.
3. The explosion-protected PTZ camera shall be compatible with Bosch protocol.
4. The explosion-protected PTZ camera shall be compatible with VCL protocol.
5. The explosion-protected PTZ camera shall be compatible with Forward Vision protocol.
H. Mounting Options and Accessories
1. Suitable accessories shall be available for the unit to be mounted in an upright or inverted position, either on a base, from a ceiling, on a wall or on at the corner of a structure.
2. The explosion-protected PTZ camera shall have an option to fit a washer nozzle to the 4-inch PCD base.
3. The explosion-protected PTZ camera shall have an optional integrated wiper with replaceable wiper blade.
4. The explosion-protected PTZ camera shall have an optional safety chain.
5. The explosion-protected PTZ camera shall have an optional 8 input alarm card (including washer pump drive function) housed in the PSU.
6. The explosion-protected PTZ camera shall have an optional washer pump drive card (no alarm inputs) housed in the PSU.
7. The explosion-protected PTZ camera shall have an optional 3D, scaling perspective privacy card with unlimited zones (housed in the camera head).
8. The explosion-protected PTZ camera shall have available a Bosch power supply providing +18 VDC from one of the following input voltages: