CURRICULAM VIATE

N. SYED MUSTHAFA129 , B Block, Jakir Hussian ST,

ennur, Trichy, Tamil nadu , India.

India -91-7845596660 Sykpe Id : musthafa60600

Carrier summary:

Total of5 years experience inInspection, Quality Control and Non Destructive Testing ofPressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power Plants, Rigs, Ships and Storage Tanks both atthe time offabrication and on-stream stage.

Current Experience

Employer : YANSAP PETROL CHEMICAL PLANT(SHUT DOWN)

JEDDHA ( YANBU ) IN SAUDI ARABIA.

Position held : NDT Technician. ( UT , MT , PT , Broescope Inspection, Eddy current)

Period : JAN 2015 to JUN 2015 ( Five month )

JOB EXPERIENCE

Performed NDT Inspection of vessels, Tanks, Pipes, Coils, Structural Steel etc

Performed UT Thickness measurement for Exchanger, Hot piping area, Vessels, Tank, Reactor and columns.

Performed Ultrasonic Testing UT corrosion Survey on all Fuel, Drain & Gas pipelines

Performed UT Weld Scanning for Exchangers, Vessels, Long seam & cir seam weld.

Performed Magnetic Particle Testing & Reentrant Testing on required Equipments & Pipelines

Performed Ultrasonic Thickness measurement for Reactor in shell , head ,

Nozzle and piping recorded in thickness report

  • Performed bores cop inspection in Exchangers inside all the piping in video recorded in borescop machine the I have found the chemical deposited
  • Performed ultrasonic testing with Vessels , Columns , Reactors , Exchangers and piping Nozzles everything measurement recorded in report

Preparation of all inspection report submission to Client and maintain Company Inspection filling system

Employer : M/s. INSPECTA INTERNATIONAL LLC , Ajman, DUBAI ( UAE ).

Position held: NDT Technician. ( UT , MT , PT )

Period : April 2012 to May 2014. ( Two years )

JOB EXPERIENCE

Performed Ultrasonic Testing on piping in detection of Corrosion, Erosions and Pitting & UT Thickness Survey on vessel & Column.

Performed Ultrasonic Thickness Survey on gas pipelines.GASCO (Gas Project HABSHAN)-

Performed UT (Weld Scanning, Thickness Survey and Corrosion Survey) MT and DPI on the required joints of pipelines at Ammonia Plant, Sulphuric Plant.

Performed Ultrasonic Testing, Ultrasonic Thickness Survey, MT & PT on welds of Boats & small Ships during Maintenance & Constructions.

Performed UT & PT on Welds for tubes, pipes, header joints and valves bodies

Performed UT on welds & raw materials (lamination check) for windmill tubular towersArranging the NDT inspection for selected joints as per customers requirements

Ultrasonic testing on various piping butt welded joint in (sulphur gas plant loading facility extension Project in jetty area) during the time of construction,

Magnetic Particle testing on various pressure Piping & Pipeline for UAE GAS sulphur plant project inside the Raslaffan facility area.DPI for CUNI Fire water line.

Performed UT Thickness measurement for Exchanger, Hot piping area, Vessels, Tank, Reactor and columns.

  • Performed ultrasonic thickness measurement for column Nozzle and inside plate welding and manual thickness recorded in UT Report
  • Performed ultrasonic thickness in vessels welding piping and all outside nozzle and manual head and shell head recorded in UT Report
  • Performed ultrasonic testing in weld plate and pipe line weld found the defect of the weld prepared final UT report

Preparation of all inspection report submission to Client and maintain Company Inspection filling system

Employer : CETHAR VESSELS LIMITED PVT IN INDIA

Position held : NDT Technician.

Period : May 2010 to March 2012 ( UT , MT , PT )

JOB EXPERIENCE

  • Performed UT Thickness Survey, Prepared thickness survey reports.
  • Performed DPI on the Heater and required joints of pipelines.
  • Performed DPI on the required joints of pipelines on Root weld and Final weld.
  • Performed UT Thickness Survey, Prepared thickness survey reports
  • Performed MT on Reactors (Ac yoke method).
  • Performed DPI on the Pipelines joints, Reactors, Exchangers, Vessels, Heaters and Columns.
  • Carried out the DPT in the pipe lines, exchangers, vessels and heaters.
  • Preparation of final inspection report
  • Performed Magnetic Particle Testing on Heavy Pressure Vessels with connecting tubes and boiler super heater coils
  • Performed Ultrasonic Testing on piping in detection of Corrosion, Erosions and Pitting on welded parts, Refinery drums and oil storage tanks.
  • Performed MT on weldments and UT on raw materials lamination check and weldments.
  • Ultrasonic Testing on piping in detection of Corrosion, Erosions and Pitting on welded parts, Refinery drums and oil storage tanks.
  • Magnetic Particle Testing on Heavy Pressure Vessels with connecting tubes and boiler super heater coils, etc.
  • Performed Ultrasonic Testing, Ultrasonic Thickness Survey, MT & PT on welds of Boats & small Ships during Maintenance & Constructions.

Employer : PRAVEEN ENGINEERING WORKS, Trichy ( India ).

Position held : ASST, NDT Technician. ( UT , MT , PT )

Period : Jan 2009 to Mar 2010

JOB EXPERIENCE

  • Assigned to NDT Technician to carry out on Weld Inspection on piping.
  • Carried out NDT testing for client using UT, MT & PT methods.
  • Carried out Ultrasonic Corrosion monitoring of Pipelines
  • Carrie Carried out PT inspection on welds joints, & MT on weld,

Nozzle fillet weld and inspected on machined.

  • Performed UT Weld Scanning for Exchangers, Vessels, Long seam &

cir seam weld.

Project carried on Major Company:

AEW (Ambigai Engineering Works)

Performed UT on casting materials on Hub after Machining.

AE (Anand Engineering)

Performed UT on weldments raw materials (lamination check) for windmill tubular towers.

DN (Dhanalakshmi Engineering)

Performed UT on weldments, Power Generating Jobs.

NEE (Nagi Enterprise)

performed UT on weldments for Nozzles and castings hub materials check.

BEI (Barakath Engg Industries)

Performed UT on raw material (Lamination check) for all wind mill tubular towers.

BEPL (Baby Engg Pvt. Ltd.)

Performed UT & MT on weld of heat Exchanger, boiler drums (require joints) and raw materials.

Technical Qualification:

American Society for Non-Destructive Testing ASNT LEVEL-II

ASNT-SNT-TC-1A Certified Level II in Ultrasonic Testing.

ASNT-SNT-TC-1A Certified Level II in Radiographic Testing.

ASNT-SNT-TC-1A Certified Level II in Penetrant Testing.

ASNT-SNT-TC-1A Certified Level II in Magnetic Testing.

Educational Qualification:

B.COM- Jamal Mohamed College

HSCC - G.S.M. HR, SEC, SCHOOL

S.S.L.C - G.S.M. HR, SEC, SCHOOL

Familiarization with equipment handled:

Ultrasonic Testing:EEC EX10, MICROSCAN PX10, PX20,

MODSONIC EINSTIEN II TFT , USM 35 , 25.

MODSONIC EDISON ENSTIEN II TFT

OLYMPUS EPOCH 600 USA

ANLOG MACHINE & DIGTAL MACHINE

Thickness Survey :MODSONIC EDISON-1.

OLYMPUS MG45

CHINA MACHINE UM2D

Broescope Inspection : EVERST - VIT - USA

Radiographic Testing:SENTINAL, SPEC, ROLI-1.

Magnetic Particle Testing:MAGNA FLUX (YOKEMETHOD) AC & DC.

Liquid Penetrant Testing:VISIBLE SOLVENT REMOVABLE METHOD

Computer Knowledge:

PGDCA - CCI Computer Education,Trichy,Tamil Nadu

TALLY ERP 9 - BDBS Computer Education,Trichy,Tamil Nadu

Personal Profile:

Father s Name :S. Nagoor Gani

Gender : Male

Date of birth : 02.04.1987

Marital Status :Single

Nationality :Indian

Languages Known :English, Tamil & Hindi.

India Licence : F/TN/ 045 / 014286 / 2005

LMV : 07 / 06 / 2005 / TN045

MCWG : 07 / 06 / 2005 / TN045

PASSPORT DETAILS:

Passport Number:H 6413091(ECNR)

Validity:up to 07/09/2019

Place of Issued:Trichy, Tamilnadu, India

DECLARATION:

I hereby declare that the above given details are true and correct to the best of my knowledge.

Place: Yours Faithfully,

Date: N. SYED MUSTHAFA