Display Hidden Notes to Specifier. (Don't Know How? Click Here) s93

SECTION 10 28 16

ACCESSIBLE BATH ACCESSORIES

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Access-Able Designs, Inc; benches, shower chairs, toilet benches, dressing benches, grab bars, pool lifts, spa lifts.
This section is based on the products of Access-Able Designs, Inc, which is located at:
Access-Able Designs, Inc.
494 53rd Square
Vero Beach, FL 32968
Toll Free: 877-853-7816
Fax: 772-872-3200
Web Site: www.accessabledesigns.com
At Access-Able Designs, we offer some of the best, ADA compliant bath transfer benches in the industry. We don't stop there though. In addition to our bath transfer benches, we are also your number one source for shower benches, shower chairs, pool access chairs, spa lifts, pool lifts, dressing benches and so much more. We strive to offer the most complete line of handicap accessible products on the web and have been doing so for years. Start browsing through our website for more information on our bath transfer benches and all of our other products!
Our goal at Access-Able Designs is to make your world accessible. Whether it's making the transition from your wheelchair to the bathtub easier or giving you the opportunity to enjoy the benefits of a spa without requiring assistance from others, we constantly aim to make your life easier.

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 Bath Transfer Benches:

1.1.1.1 Bathtub benches. (Model SH-411)

1.1.1.2 Rear mount tub transfer benches without legs. (Model SH-414)

1.1.1.3 Tub transfer benches. (Model SH-414-2SD)

1.1.1.4 Tub transfer benches. (Model SH-414-L)

1.1.1.5 Portable tub/shower transfer benches. (Model SH-415)

1.1.1.6 Portable clamp-on tub seats. (Model SH-416)

1.1.1.7 Garden tub benches. (Model SH-421)

1.1.1.8 Portable tub/shower transfer benches. (Model SH-425)

1.1.1.9 Portable clamp-on tub seats. (Model SH-426)

1.1.1.10 Wall mounted shower transfer benches. (Model SH-400)

1.1.1.11 Shower transfer benches. (Model SH-400-2SDL)

1.1.1.12 Wall mounted shower transfer benches. (Model SH-410)

1.1.1.13 Shower transfer benches. (Model SH-410-2SDL)

1.1.1.14 Shower transfer benches. (Model SH-420-2SDL)

1.1.2 Shower Chairs:

1.1.2.1 Shower chairs (Deluxe Models)

1.1.2.2 Shower chairs. (Extra Wide Models)

1.1.2.3 Reclining shower commode chairs.

1.1.3 Toilet Benches:

1.1.3.1 Standard toilet transfer benches. (Model W-440)

1.1.3.2 Residential toilet transfer benches. (Model W-443)

1.1.4 Dressing Benches:

1.1.4.1 Adult dressing benches. (Model D-101)

1.1.4.2 Child dressing benches. (Model CH-101)

1.1.4.3 Stationary dressing benches. (Model DST-101)

1.1.5 Grab bars.

1.1.6 Pool Lifts:

1.1.6.1 Pool lifts. (PRO Pool Lift)

1.1.6.2 Pool lifts. (Ranger Pool Lift)

1.1.6.3 Pool lifts. (Titan 600 Lift)

1.1.6.4 Pool lifts. (Scout Lift)

1.1.6.5 Pool lifts. (Rebel Lift)

1.1.6.6 Portable Pool lifts. (Patriot Portable Pro Pool Lift)

1.1.6.7 In-ground, above deck, automatic, 180 degree turn pool lifts. (Model IGAT-180 AD)

1.1.6.8 In-ground, recessed cylinder, manual, 360 degree turn pool lifts. (Model IGRC)

1.1.6.9 Manual, 360 degree turn pool lifts. (Model IGMT)

1.1.6.10 Pool lifts. (Model IGAT-90)

1.1.6.11 Pool lifts. (The POWER EZ Pool Lift)

1.1.6.12 Pool lifts. (EZ Pool Lift)

1.1.7 Spa Lifts:

1.1.7.1 Spa lifts. (Pro Spa Lift 40)

1.1.7.2 Above-ground spa lifts. (Model AG60)

1.1.7.3 Above-ground, wood-post mount spa lifts. (Model AG48WP)

1.1.7.4 Above-ground, spa lifts, with 60 inch (1524 mm) clearance. (Model AG72)

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section 08 83 00 - Mirrors.

1.2.3 Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

1.2.4 Section 09 30 00 - Tiling.

1.2.5 Section 10 25 00 - Service Walls.

1.2.6 Section 10 26 23.13 - Impact Resistant Wall Protection.

1.2.7 Section 10 28 00 - Toilet, Bath, and Laundry Accessories.

1.2.8 Section 22 43 23 - Healthcare Showers.

1.3 REFERENCES

1.3.1 Americans with Disabilities Act (ADA).

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets for products specified, including but not limited to:

1.4.2.1 Performance characteristics.

1.4.2.2 Preparation instructions and recommendations.

1.4.2.3 Storage and handling requirements and recommendations.

1.4.2.4 Installation Instructions.

1.4.3 Shop Drawings: Provide approved shop drawings showing locations of bath accessories in plan and elevation, with details including but not limited to components, anchorage requirements, accessories, tolerances and clearances.

1.5 QUALITY ASSURANCE

1.5.1 Single Source Requirements: To the greatest extent possible, provide products specified in this section from a single manufacturer.

1.5.2 Manufacturer's Qualifications: Successfully engaged in the manufacture of product specified in this section for at least 5 years.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.5.3 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1.5.3.1 Finish areas designated by Architect.

1.5.3.2 Do not proceed with remaining work until workmanship is approved by Architect.

1.5.3.3 Rework mock-up area as required to produce acceptable work.

1.6 DELIVERY, STORAGE AND HANDLING

1.6.1 Deliver, store and handle materials and products in strict compliance with manufacturer's instructions and recommendations and industry standards.

1.6.2 Store products indoors in manufacturer's or fabricator's original containers and packaging, with labels clearly identifying product name and manufacturer. Protect from damage.

1.7 PROJECT CONDITIONS

1.7.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.8 WARRANTY

1.8.1 Manufacturer's Standard Limited Warranties:

** NOTE TO SPECIFIER ** 5 year warranty applies to all models with exceptions listed below. Delete the first subparagraphs below if selection one of the models mentioned the remaining subparagraphs.

1.8.1.1 Warranty Period: Five years for materials and workmanship.

** NOTE TO SPECIFIER ** 2 year warranty applies to Rebel Pool Lifts.

1.8.1.2 Warranty Period: Two years for materials and workmanship.

** NOTE TO SPECIFIER ** Limited lifetime structural warranty applies Titan 600 and Scout Pool Lifts.

1.8.1.3 Warranty Period: Limited lifetime structural warranty.

** NOTE TO SPECIFIER ** 2 year structural warranty applies to Ranger Pool Lifts.

1.8.1.4 Warranty Period: Two years for structural components.

** NOTE TO SPECIFIER ** The following applies to EZ Pool Lifts.

1.8.1.5 Warranty Periods:

1.8.1.5.1 Five years for structural components.

1.8.1.5.2 One year for sling warranty.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Access-Able Designs, Inc., which is located at: 494 53rd Square; Vero Beach, FL 32968; Toll Free Tel: 877-853-7816; Fax: 772-872-3200; Email: request info (); Web: www.accessabledesigns.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 BATH TRANSFER BENCHES

** NOTE TO SPECIFIER ** Delete options for models not required.

2.2.1 Bathtub Benches: Model SH-411 Bathtub Benches as manufactured by Access-Able Designs, Inc.

2.2.1.1 Lifting Capacity: 250 lb (113 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.

2.2.1.2 Mounting Requirements: Minimum 2 inch (52 mm) wide tub ledges on both sides.

2.2.1.3 Operation: Seat folds up when not in use, held in raised position by hinge bracket.

2.2.1.4 Wall Brackets: Type 304 (18-8) stainless steel, 10 gauge hinge brackets with 3 factory drilled mounting holes.

2.2.1.5 Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.

** NOTE TO SPECIFIER ** Delete options for seat tops not required.

2.2.1.6 Seat Tops: As scheduled and indicated on Drawings.

2.2.1.7 Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.

** NOTE TO SPECIFIER ** Delete options for color not required.

2.2.1.7.1 Colors: As scheduled and indicated on Drawings.

2.2.1.7.2 Colors: PW White.

2.2.1.7.3 Colors: PA Almond.

2.2.1.7.4 Colors: PT Teak.

2.2.1.8 Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.

** NOTE TO SPECIFIER ** Delete options for color not required.

2.2.1.8.1 Colors: As scheduled and indicated on Drawings.

2.2.1.8.2 Colors: NW White.

2.2.1.8.3 Colors: NA Almond.

** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.

2.2.1.9 Seat Top Size: Custom, ______.

2.2.1.10 Seat Top Size: Custom, as indicated on Drawings.

2.2.1.11 Seat Top Size: Standard, 29 inches W x 15 inches D (736 mm W x 381 mm D).

2.2.2 Bathtub Benches: Model SH-414 Rear Mount Tub Transfer Benches Without Legs as manufactured by Access-Able Designs, Inc.

2.2.2.1 Compliance: ADA compliant when mounted to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm).

2.2.2.2 Lifting Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.

2.2.2.3 Mounting Requirements: Minimum of 2 inch (52 mm) tub ledges to rest on both sides.

2.2.2.4 Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledges when seat top is lowered.

2.2.2.5 Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledges and bars on seat bottom when in lowered position.

2.2.2.6 Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge brackets.

2.2.2.7 Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.

** NOTE TO SPECIFIER ** Delete options for seat tops not required.

2.2.2.8 Seat Tops: As scheduled and indicated on Drawings.

2.2.2.9 Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.

** NOTE TO SPECIFIER ** Delete options for color not required.

2.2.2.9.1 Colors: As scheduled and indicated on Drawings.

2.2.2.9.2 Colors: PW White.

2.2.2.9.3 Colors: PA Almond.

2.2.2.9.4 Colors: PT Teak.

2.2.2.10 Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.

** NOTE TO SPECIFIER ** Delete options for color not required.

2.2.2.10.1 Colors: As scheduled and indicated on Drawings.

2.2.2.10.2 Colors: NW White.

2.2.2.10.3 Colors: NA Almond.

** NOTE TO SPECIFIER ** Fill in blank below with custom color designation or delete line as applicable. Delete options for size not required.

2.2.2.11 Seat Top Size: Custom, ______.

2.2.2.12 Seat Top Size: Custom, as indicated on Drawings.

2.2.2.13 Seat Top Size: Standard, 29 inches W x 15 inches D (736 mm W x 381 mm D).

** NOTE TO SPECIFIER ** Use this seat with the fold-down legs when there is no inner ledge for the regular seat to rest on. Delete if nog required.

2.2.3 Bathtub Benches: Model SH-414-2SD Tub Transfer Benches as manufactured by Access-Able Designs, Inc.

2.2.3.1 Compliance: ADA compliant when mounted to withstand required loads and at a height from 17 inches to 19 inches (431 mm to 482 mm).

** NOTE TO SPECIFIER ** Simply put: If you were sitting in the back end of your tub and your left side is facing the tub's wall, then you will want a Left Handed Version. Otherwise see our Right Handed Version. Delete options for configuration not required.

2.2.3.2 Configuration: As indicated on Drawings.

2.2.3.3 Configuration: Right hand.

2.2.3.4 Configuration: Left hand.

2.2.3.5 Lifting Capacity: 420 lb (190 kg), when installed with anchorage hardware and on substrates with backing as recommended by manufacturer.

2.2.3.6 Mounting Requirements: Minimum of 2 inch (52 mm) tub ledge to rest on one side.

2.2.3.7 Operation: Seat folds up when not in use, held in raised position by tension rod in rear crossmember; bars on seat bottom rest on tub ledge when seat top is lowered. Locking pin automatically holds swing down leg in place.

2.2.3.8 Extruded Plastic Strips: For protection of surface finishes at points of contact between tub ledge and bar on seat bottom when in lowered position.

2.2.3.9 Wall Flanges: Type 304 (18-8) stainless steel, 10 gauge brackets.

2.2.3.10 Legs: Telescoping for height adjustment; Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing, heliarc welded to frame.

2.2.3.11 Feet: Adjustable with locking nut, rubber, non-skid.

2.2.3.12 Main Frame and Crossmembers: Type 304 (18-8) stainless steel, 18 gauge (1.2 mm), 1 inch (25 mm) tubing.

** NOTE TO SPECIFIER ** Delete options for seat tops not required.

2.2.3.13 Seat Tops: As scheduled and indicated on Drawings.

2.2.3.14 Seat Tops: Phenolic, 1/2 inch (13 mm) thick, bolted to frame with stainless steel hardware.

** NOTE TO SPECIFIER ** Delete options for color not required.

2.2.3.14.1 Colors: As scheduled and indicated on Drawings.

2.2.3.14.2 Colors: PW White.

2.2.3.14.3 Colors: PA Almond.

2.2.3.14.4 Colors: PT Teak.

2.2.3.15 Seat Tops: Padded naugahyde, seam-sealed, covering 2 inch (52 mm) foam mounted on 1/2 inch (13 mm) marine plywood.

** NOTE TO SPECIFIER ** Delete options for color not required.