Display Hidden Notes to Specifier. (Don't Know How? Click Here) s107

SECTION 07 46 26

FIBER SUBSTRATE SIDING

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** LP SmartSide; hardboard panel siding, lap siding, simulated shakes, soffit panels, and trim and fascia.
.
This section is based on the products of LP SmartSide, which is located at:
414 Union St. Suite 2000
Nashville, TN 37219
Toll Free Tel: 888-820-0325
Fax: 877-523-7192
Email: request info ()
Web: www.lpcorp.com/smartside
[ Click Here ] for additional information.
LP SmartSide products deliver all the warmth and beauty of traditional wood, plus the durability and workability of engineered wood. Our SmartGuard manufacturing process actually improves upon nature, creating products that are engineered for strength, performance and protection against fungal decay and termites. The LP SmartSide family features four distinct product collections, all backed by an industry-leading 5/50 Year Transferable Limited Warranty.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Primed hardboard siding.

B. Matching soffit panels and trim.

C. Sealing panel joints and penetrations.

D. Building paper.

E. Flashings within siding installation.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 06 10 00 - Rough Carpentry: Stud wall bracing and sheathing.

B. Section 07 26 00 - Vapor Retarders: Vapor retarder on warm side of exterior wall and in crawl space.

** NOTE TO SPECIFIER ** Field painting should be accomplished as soon as possible after installation.

C. Section 09 90 00 - Painting and Coating.

1.3 REFERENCES

A. ANSI/AHA A135.6 - Hardboard Siding.

B. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. [ Product Data ]: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods, including nailing patterns.

4. Applicable model code authority evaluation report (including but not limited to ICBO, SBCCI, BOCA, CCMC).

** NOTE TO SPECIFIER ** To avoid voiding of warranty, vapor retarders must be properly installed.

C. Siding manufacturer's requirements for products to be installed by others.

D. Maintenance and periodic inspection recommendations.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Store products off the ground, on a flat surface, and under a roof or separate waterproof covering.

1.6 WARRANTY

A. Manufacturer's Standard Warranty: 50 year transferable limited warranty with 5 year 100 percent repair and replacement warranty.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: LP SmartSide, which is located at: 414 Union St. Suite 2000; Nashville, TN 37219; Toll Free Tel: 888-820-0325; Fax: 877-523-7192; Email: request info (); Web: www.lpcorp.com/smartside

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MATERIALS

** NOTE TO SPECIFIER ** Select one or more siding types below and delete the others. If more than one type is specified, be sure to indicate where each is to be used.

A. Panel Siding: 120 Series as manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: Average of 1/2 inch (13 mm) nominal.

4. Style: Cedar grain, grooves at 8 inches (203 mm) on center; shiplap edges.

5. Finish: Primed.

6. Width: 48 inches (1220 mm), nominal.

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs.

7. Length: 96 inches (2440 mm), nominal.

8. Length: 108 inches (2740 mm), nominal.

B. Panel Siding: 76 Series as manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: Average of 7/16 inch (11 mm) nominal.

** NOTE TO SPECIFIER ** Delete style options not required.

4. Style: Cross-sawn fir pattern, 1 inch (25 mm) reverse board and batten grooves at 12 inches (305 mm) on center.; shiplap edges, primed only

5. Style: Smooth, grooves at 8 inches (203 mm) on center; shiplap edges, primed only.

6. Style: Smooth, no grooves; square edges.

7. Style: Cedar, at 8 inches (203 mm) on center; shiplap edges, primed only.

8. Style: Cedar, at 8 inches (203 mm) on center; shiplap edges, primed and prefinished.

9. Style: Stucco pattern; shiplap edges, primed only.

10. Style: Stucco pattern; shiplap edges, primed and prefinished.

11. Width: 48 inches (1220 mm), nominal.

** NOTE TO SPECIFIER ** 96 inch option available for all styles. 108 inch option only available with primed cross-sawn fir pattern, primed cedar and primed stucco pattern. Delete one of the following two paragraphs.

12. Length: 96 inches (2440 mm), nominal.

13. Length: 108 inches (2740 mm), nominal.

C. Lap Siding: 120 Series as manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior primed finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: average 1/2 inch (11 mm) nominal.

** NOTE TO SPECIFIER ** Delete style options not required.

4. Style: Cedar grain; self aligning lap, 7-7/8 inches (200 mm) wide; shiplap edges.

5. Style: Cedar grain; simulated bevel lap, 4 "boards" in 11-7/8 inch (302 mm) width; shiplap edges.

6. Style: Cedar grain; simulated bevel lap, 5 "boards" in 11-7/8 inch (302 mm) width; shiplap edges.

7. Style: Cedar grain; simulated bevel lap, 4 "boards" in 15-15/16 inch (405 mm) width; shiplap edges.

8. Style: Cedar grain; simulated bevel lap, 5 "boards" in 15-15/16 inch (405 mm) width; shiplap edges.

9. Style: Cedar grain; simulated bevel lap, 8 "boards" in 15-15/16 inch (405 mm) width; shiplap edges.

10. Length: 16 feet (4877 mm).

D. Lap Siding: 76 Series as manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: Average of 7/16 inch (11 mm) nominal.

** NOTE TO SPECIFIER ** Delete style options not required.

4. Style: Cedar grain; 6 inches (152 mm) wide; square edges.

5. Style: Cedar grain; 8 inches (203 mm) wide; square edges.

6. Style: Cedar grain; 9-1/2 inches (241 mm) wide; square edges.

7. Style: Cedar grain; 12 inches (305 mm) wide; square edges.

8. Style: Colonial Beaded edge, cedar grain; 8 inches (203 mm) wide; square edges.

9. Style: Colonial Beaded edge, smooth surface; 8 inches (203 mm) wide; square edges.

10. Style: Colonial Beaded edge, smooth surface; 9 inches (229 mm) wide; square edges.

11. Style: Smooth surface; 6 inches (152 mm) wide; square edges.

12. Style: Smooth surface; 8 inches (203 mm) wide; square edges.

13. Style: Smooth surface; 12 inches (305 mm) wide; square edges.

14.Length: 16 feet (4877 mm).

E. Shakes: As manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior primed finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: 7/16 inch (11 mm) nominal.

** NOTE TO SPECIFIER ** Delete style option not required.

4. Style: Simulated random shake with weathered wood grain pattern; shiplap side edges, square top and bottom edges.

5. Style: Straight Edge shake with cedar grain pattern; shiplap side edges, square top and bottom drip edges.

6. Size: 12 by 48 inches (305 by 1219 mm), nominal.

F. Soffit Panels: As manufactured by LP SmartSide.

1. Description: Embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; thermoset acrylic latex primed finish; no grooves, square edges.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

3. Thickness: 7/16 inch (11 mm) nominal.

** NOTE TO SPECIFIER ** Delete options for styles not required.

4. Style: Cedar grain, 48 inches (1219 mm) by 8 feet (2438 mm).

5. Style: Cedar grain, 48 inches (1219 mm) by 9 feet (2743 mm).

6. Style: Cedar grain, 15-15/16 inches (405 mm) by 16 feet (4877 mm).

7. Style: Smooth grain, 48 inches (1219 mm) by 8 feet (2438 mm).

8. Style: Smooth grain, 48 inches (1219 mm) by 9 feet (2743 mm).

G. Trim and Fascia: As manufactured by LP SmartSide.

1. Description: Wood grain embossed surface hardboard complying with ANSI/AHA A135.6, with resin and linseed oil impregnated surface; acrylic exterior primed finish.

** NOTE TO SPECIFIER ** Delete if not required.

2. Fire Rating: 1 hour ASTM E119 assemblies available; ASTM E 84 Class C flamespread.

** NOTE TO SPECIFIER ** Delete options for style not required.

3. Style: Smooth grain.

4. Style: Cedar grain.

** NOTE TO SPECIFIER ** Delete options for size not required.

5. Size: 2-3/4 inches wide by 16 ft (4877 mm) long.

6. Size: 3-1/2 inches wide by 16 ft (4877 mm) long.

7. Size: 4-1/2 inches wide by 16 ft (4877 mm) long.

8. Size: 5-1/2 inches wide by 16 ft (4877 mm) long.

9. Size: 7-1/4 inches wide by 16 ft (4877 mm) long.

10. Size: 9-1/4 inches wide by 16 ft (4877 mm) long.

11. Size: 11-1/4 inches wide by16 ft (4877 mm) long.

12. Size: 3-1/2 inches wide by 8 ft (2438 mm) long.

13. Size: 3-1/2 inches wide by 12 ft (3658 mm) long.

14. Ploughed Fascia: 5-1/2 inches wide by 16 ft (4877 mm) long; 4/4 thick.

15. Ploughed Fascia: 7-1/4 inches wide by 16 ft (4877 mm) long; 4/4 thick.

** NOTE TO SPECIFIER ** The following option is available only on 8 inch width and 4/4 thickness.

16. Trim fascia boards plowed to receive soffit panel.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B.If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 INSTALLATION

A. Install in accordance with manufacturer's instructions and drawing details.

1. Read warranty and comply with terms necessary to maintain warranty coverage.

2. Install in accordance with conditions stated in model code evaluation service report.

3. Properly space joints to allow for equilibration.

B. Allow products to adjust to ambient conditions before starting installation.

C. Do not install to green wood or crooked structural framing. Do not install over rain soaked or buckled materials. Do not install if excessive moisture is present in the interior, including that from curing concrete and plaster.

** NOTE TO SPECIFIER ** Delete all of the following application conditions that do not apply to the project. Installation over furring (strapping) is the best practice, to avoid damage due to possible moisture migration from inside the building. In Canada, furring (strapping) is recommended.

D. Over Wood and Wood-Composite Sheathing: Fasten siding through sheathing into studs.

E. Over Masonry Walls: Install furring strips (strapping) of adequate thickness to accept full length of nails and spaced at 16 inches (406 mm) on center.

F. Install sheet metal flashing above door and window casings and horizontal trim in field of siding.

G. Do not install siding less than 6 inches (150 mm) from ground nor closer than 1 inch (25 mm) to roofs, patios, porches, and other surfaces where water may collect.

H. Do not cut siding to fabricate trim; use trim components manufactured for the purpose.

I. After installation, seal joints except lap joints of lap siding. Seal around penetrations. Paint exposed cut edges

3.3 PROTECTION

A. Protect installed products until completion of project.

B.Touch-up, repair or replace damaged products after Substantial Completion.

END OF SECTION

07 46 26-1