Rimex Metals Group
SECTION 05730
ORNAMENTAL FORMED METAL
Display hidden notes to specifier by using "Tools"/"Options"/"View"/"Hidden Text".
** NOTE TO SPECIFIER ** Rimex Metals (USA) Inc.; textured metal, custom metal fabrications.
.
This section is based on the products of Rimex Metals (USA) Inc., which is located at:
2850 Woodbridge Ave
Edison, NJ 08837
Toll Free Tel: 800-526-7600
Tel: 732-549-3800
Fax: 732-549-6435
Email:
Web: www.rimexmetals.com
PART 1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
A. Textured metal fabrications for the following applications:
1. Metal wall, floor and ceiling panels.
2. Metal wall coverings.
3. Metal column enclosures.
4. Metal toilet compartments.
5. Metal tiles.
6. Stainless steel flooring.
7. Metal countertops.
8. Metal corner guards and door protection.
9. Steel doors.
10. Metal handrails.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete section below if not relevant to this project; add others as required.
A. Section 05500 - Metal Fabrications.
B. Section 05580 - Formed Metal Fabrications.
C. Section 05700 - Ornamental Metal Fabrications.
D. Section 05720 - Ornamental Handrails and Railings.
E. Section 05730 - Ornamental Formed Metal.
F. Section 06415 - Countertops: Metal.
G. Section 07410 - Metal Wall Panels.
H. Section 08110 - Steel Doors and Frames.
I. Section 09370 - Metal Tiles.
J. Section 09720 - Wall Coverings: Metal Wall Panels.
K. Section 10160 - Metal Toilet Compartments.
L. Section 10260 - Wall and Corner Guards.
M. Section 14200 - Elevators.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
A. American Society for Testing and Materials (ASTM): ASTM A 240 -Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications.
B. American Society for Testing and Materials (ASTM): ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
C. National Association of Architectural Metal Manufacturers (NAAMM): NAAMM Metal Finishes Manual for Architectural and Metal Finishes.
1.4 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Manufacturer's data sheets on each product to be used, including:
1. Preparation instructions and recommendations.
2. Description of materials, finishes, and construction.
3. Storage and handling requirements and recommendations.
4. Installation methods.
5. Maintenance methods.
6. Cleaning methods.
C. Shop Drawings: Submit shop drawings showing plans, sections, and elevations. Show edge conditions, attachment to other work, profiles and finishes of each metal member, and joinery to other metal members and to adjacent work.
1. Show mounting types, heights, anchorage methods, and attachment devices.
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors, textures, and patterns.
E. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, textures, and patterns.
1.5 QUALITY ASSURANCE
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
A. Mock-Up: Provide a mock-up for evaluation of application workmanship.
1. Finish areas designated by Architect.
2. Do not proceed with remaining work until workmanship and materials are approved by Architect.
3. Refinish mock-up area as required to produce acceptable work.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store products in accordance with manufacturer's requirements.
B. Store products in manufacturer's unopened packaging with labels intact until ready for installation.
1.7 PROJECT CONDITIONS
A. Environmental Requirements: Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
B. Existing Conditions: Field measure to verify dimensions before fabrication.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Rimex Metals (USA) Inc., which is located at: 2850 Woodbridge Ave.; Edison New Jersey 08837; Toll Free Tel: 800-526-7600; Tel: 732-549-3800; Fax: 732-549-6435; Email: ; Web: www.rimexmetals.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01600.
** NOTE TO SPECIFIER ** Following are specifications for applications in their most popular metals, gauges and patterns. Additional material, material thickness, finish, texture and laminated thickness are available in many other combinations. Refer to MATERIALS and FINISHES AND PATTERNS articles for for descriptions for custom applications. Delete applications not required.
2.2 APPLICATIONS
** NOTE TO SPECIFIER ** Delete elevator application if not required.
A. Elevator Interior Walls and Doors:
1. Stainless Steel: Apply mechanical finish on fabricated work in the locations scheduled, with texture and reflectivity to match architects sample. Protect with PVC covering. Provide alloy complying with ASTM A240, with standard hardness required for fabrication, strength and durability:
** NOTE TO SPECIFIER ** Delete stainless steel alloy not required.
a. Type 302.
b. Type 304.
c. Type 316.
2. Textured Pattern: Pattern as manufactured by Rimex Metals (USA) Inc, 2850 Woodbridge Ave Edison New Jersey 08837 (800) 526-7600, with .060 inch (1.5 mm) (16 gauge) thickness and bright directional satin or #4 finish.
** NOTE TO SPECIFIER ** Delete one of two paragraphs below.
a. Refer to Room Finish Schedule for pattern.
** NOTE TO SPECIFIER ** Refer to pattern listing below. Insert pattern required.
b. Pattern: ______.
** NOTE TO SPECIFIER ** Delete application if not required.
B. Decorative Metal Panel:
1. Panels shall consist of a metal face, core and metal backer. Panels shall be fabricated with fire rated thermosetting structural epoxy, 100 percent solids 0 percent volatiles, a platen press under controlled conditions of temperature, time, and pressure. No contact adhesives or pinch rollers shall be employed in the panel fabrication.
2. Panel Size: Panels shall be fabricated in sizes up to 46 inches (1168 mm) in width and 120 inches (3048 mm) in length depending upon the metal face employed. All panel edges will be factory formed and corners will be cold formed, welded and polished or open. Unit size and details as shown on drawing.
** NOTE TO SPECIFIER ** Delete core not required.
3. Core Material: Core shall be 3/8 inch (9.5 mm) hexagonal aluminum honeycomb, thickness to be 1/4 inch (6 mm) to 1 inch (25 mm) as scheduled.
4. Core Material: Grade 1 Particle Board 1/2 inch (12 mm) to 1 inch (25 mm) as scheduled.
5. Core Material: Internal hat channel stiffeners.
6. Fabrication: Provide metals free from surface blemishes where exposed to view in finished unit. Surfaces exhibiting pitting, seam marks, roller marks, stains, discolorations, or other imperfections on finished units shall not be acceptable.
7. Panel Backer: 0.025 inch (.6 mm) tension leveled aluminum, epoxy primed or anodized as scheduled.
8. Wall Panel Mounting: Demountable Z-Clip to be continuous aluminum panel extrusions used in conjunction with continuous aluminum wall extrusions.
9. Panel Protection: A non-UV resistant peel-off protective coating.
10. Panel Facing: Provide alloy in .060 inch (1.5 mm) (16 gauge) with textured finish pattern by Rimex Metals (USA) Inc., 2850 Woodbridge Ave. Edison New Jersey 08837 (800) 526-7600.
** NOTE TO SPECIFIER ** Delete stainless steel alloy not required.
a. Panel Facing: Type 302.
b. Panel Facing: Type 304.
c. Panel Facing: Type 316.
** NOTE TO SPECIFIER ** Consult manufacturer for available finishes. Finish designations vary among metal types. Below are examples only for industry standard stainless steel finishes.
11. Finish: No. 2B (unpolished mill finish).
12. Finish: No. 4 ("satin" polish directional finish).
13. Finish: No B/A (bright annealed).
14. Finish: No. 8 (mirror finish).
15. Finish: RND (random non-directional).
16. Finish: Random Swirl.
17. Finish: Matte (dull rolled finish).
** NOTE TO SPECIFIER ** Delete one of two paragraphs below.
18. Textured Pattern: Refer to Room Finish Schedule for pattern.
** NOTE TO SPECIFIER ** Refer to pattern listing below. Insert pattern required.
19. Textured Pattern: ______.
** NOTE TO SPECIFIER ** Delete panel construction not required.
20. Decorative Metal Panel System: Metal pan- in- pan with fire rated particle- board core, sealed.
21. Decorative Metal Panel System: Metal pan-in-pan with fire rated aluminum honeycomb core.
22. Decorative Metal Panel System: Metal pan with routed fire rated particle- board for reveal and aluminum backer.
** NOTE TO SPECIFIER ** Delete application if not required.
C. Metal Wall Cladding:
1. Attachment: Metal wall cladding to be adhered to drywall with indoor/outdoor quality two-sided tape and fire rated construction adhesive. Stainless steel "J" moldings and "Divider Bar" moldings shall be used where cladding terminates and at joints where indicated.
2. Panel Facing: Provide alloy in .060 inch (1.5 mm) (16 gauge) with textured finish pattern by Rimex Metals (USA) Inc., 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600.
** NOTE TO SPECIFIER ** Delete stainless steel alloy not required.
a. Type 302.
b. Type 304.
c. Type 316.
** NOTE TO SPECIFIER ** Consult manufacturer for available finishes. Finish designations vary among metal types. Below are examples only for industry standard stainless steel finishes.
3. Finish: No. 2B (unpolished mill finish).
4. Finish: No. 4 ("satin" polish directional finish).
5. Finish: No B/A (bright annealed).
6. Finish: No. 8 (mirror finish).
7. Finish: RND (random non-directional).
8. Finish: Random Swirl.
9. Finish: Matte (dull rolled finish).
** NOTE TO SPECIFIER ** Delete one of two paragraphs below.
10. Textured Pattern: Refer to Room Finish Schedule for pattern.
** NOTE TO SPECIFIER ** Refer to pattern listing below. Insert pattern required.
11. Textured Pattern: ______.
** NOTE TO SPECIFIER ** Delete application if not required.
D. Metal Wall Panels:
1. Panel Facing: Provide alloy as scheduled with textured finish pattern by Rimex Metals (USA) Inc., 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600.
2. Attachment: Metal wall cladding to be adhered to structure by use of concealed clips and brackets. Each unit to be independently supported. Stainless steel "J" moldings and "Divider Bar" moldings shall be used where cladding terminates and at joints where applicable.
** NOTE TO SPECIFIER ** Delete types below not required.
3. Panel System: Metal laminated to fire-rated particle board.
4. Panel System: Metal laminated to fire-rated plywood.
5. Panel System: Metal laminated to fire rated particle board with aluminum backer.
6. Panel System: Metal pan-in-pan with fire-rated particle board core sealed.
** NOTE TO SPECIFIER ** Delete below if perforated panels not required.
7. Acoustic Treatment: Perforated metal panels.
** NOTE TO SPECIFIER ** Delete application if not required.
E. Metal Column Enclosures: Configured and detailed as indicated on drawings and joined as follows:
1. Panel Facing: Provide alloy as scheduled with textured finish pattern by Rimex Metals (USA) Inc, 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600.
** NOTE TO SPECIFIER ** Delete joint treatment not required.
2. Joint: Butt with interlocking tape fastening.
3. Joint: V butt with mechanically attached spring clips.
4. Joint: Reveal with locking insert.
** NOTE TO SPECIFIER ** Delete application if not required.
F. Metal Toilet Compartments: Rimex Metals stainless steel toilet partitions as supplied by acceptable partition manufacturer.
1. Construction: Doors, panels, and pilasters shall be constructed of two sheets of type 304, #4 finish Rimex Metals stainless steel with pattern as manufactured by Rimex Metals (USA) Inc., 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600. Grain to run lengthwise (vertical) for all doors, pilasters, and standard panels up to 60 inches (1524mm) deep. The two Rimex Metals sheets are laminated under pressure to1/2 inch (12 mm) honeycomb core for impact resistance, rigidity and sound deadening. Formed edges to be welded together and interlocked, under tension, with a roll formed oval crown stainless steel locking bar, mitered, welded and ground smooth at corners or be formed to interlock together to provide a watertight fit without crown molding.
** NOTE TO SPECIFIER ** Delete pattern not required.
2. Pattern: 5-SM/5-WL (ROW Pattern Designation)
3. Pattern: Leathergrain
4. Door and Panels: Door and Panel shall be 1 inch (25 mm) thick with a honeycomb core. Face plates shall not be less than 22 gauge #4 finish 304 stainless steel. Panels shall have a molding interlocking all edges or be formed to interlock together to provide a watertight fit without crown molding. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth.
5. Pilasters: Pilasters shall be 1-1/4 inches (32 mm) constructed of 20 gauge #4 finish 304 stainless steel with a sound deadening honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth.
** NOTE TO SPECIFIER ** Delete application if not required.
G. Metal Faced Tiles: Provide metal-faced tile adhered to fiber-cement board. Tiles measure 2 inches by 2 inches (52 mm by 52 mm) and 6 inches by 6 inches (152 mm by 152 mm) and are 1/4 inch (6 mm) thick. Stamped metal face promotes the adhesion of grout to the fiber-cement board. Manufactured by Rimex Metals (USA) Inc., 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600.
** NOTE TO SPECIFIER ** Delete finish not required.
1. AISI type 304 stainless steel #4 finish textured to pattern of choice.
2. AISI type 304 stainless steel #4 finish without pattern.
** NOTE TO SPECIFIER ** Size 6 X 6 only. Delete if not required.
3. Copper mill finish pattern 8HP Hammertone.
** NOTE TO SPECIFIER ** Size 2 X 2 only> Delete if not required.
4. Copper mill finish 8HP Hammertone.
5. Copper mill finish no pattern.
** NOTE TO SPECIFIER ** Delete application if not required.
H. Stainless Steel Flooring: Provide 18 gauge austenitic stainless steel, type 304 with RND (random non-directional) finish and embossed with "Imprimo" pattern "knurl" and spaced 2 inches (52 mm) on center in stagger formation. Provide "knurl" finish to tops of embossed characters resulting in a minimum static coefficient of friction of .06 in compliance with ASTM-C1028. Manufactured by Rimex Metals (USA) Inc., 2850 Woodbridge Ave., Edison New Jersey 08837 (800) 526-7600.