1

Geometry - Discovering Congruent Triangles Activity

Objective: Understanding congruent triangle postulates and theorems using

inductive reasoning.

Materials needed: straws, protractor, ruler, stapler/glue and construction paper.

Due: Monday or Tuesday, December 14th/15th (depending on A or B day)

Grading Criteria:

Directions Followed20 pts

Correct Content10 pts

Neatness10 pts

Creativity10 pts

Total50 pts

Points will be deducted for each class period the project is late.

Project Directions

The project will be done on regular notebook paper or construction paper. There should be one page for each part plus a cover page with name/date/period for a total of 7 pages. Add the project into your proof binder from Q1. The straws can be secured onto the paper with staples or glue. The project can be either hand written or typed.

Part 1

Have students cut straws or sheets of paper, into the following lengths:

2 straws 8 centimeters in length

2 straws 11 centimeters in length

2 straws 5 centimeters in length

  1. Have students put the 3 straws of different lengths together to form a triangle as shown.
  1. Form another triangle with the other set of straws.
  1. Measure the angles of both triangles using a protractor.

Questions:

1. What are the measures of the 3 angles in the first triangle

2. What are the measures of the 3 angles in the second triangle?

3. What is the relationship between the angles of each triangle?

4. Are the triangles congruent?

5. Can the straws be rearranged to form a triangle with different angles?

Part 2

  1. Take 2 of the straws, place them on a piece of paper, and form a 60-degree angle between them.
  1. Take the 2 straws of the same length and also form a 60-degree angle between them.
  1. Draw a line to represent the 3rd side. Repeat the process for the 2nd triangle.
  1. Measure the length of the 3rd side and the two remaining angles for each triangle.

Questions:

1. What is the length of the 3rd side?

2. What are the measures of the remaining angles?

3. Are the two triangles congruent?

4. Use any two straws and any angle of your choice. Do you get the same result?

Will you always get the same result?

Part 3

  1. Measure three angles measuring 80, 60, and 40 degrees on the corners of 2 pieces of construction paper or cardstock, cut them out, and label them.
  2. On a piece of paper, take one of the straws, and place two of the cutout angles on each end as shown. Repeat the process for the 2nd triangle.
  1. Using a ruler, draw a segment along each of the angle. The two segments should intersect forming the last angle. Repeat the process for the 2nd triangle.
  1. Measure the 3rd angle and the lengths of the 2 sides in each triangle.

Questions:

1. What is the measure of the 3rd angle for each triangle?

2. What are the measures of the remaining 2 sides for each triangle?

3. Are the triangles congruent?

4. What if you used the 5cm straw? The 8 cm straw? A straw with a different length?

Part 4

  1. Use two of the angles used in the example above.
  2. Use one of the straws and place one of the angles alongside it as shown. Draw a long segment like the dashed one in the drawing. Repeat the process for the 2nd triangle.
  1. Place the second angle along this segment so that when a 2nd segment is drawn, it will connect with the end of the straw.
  1. Measure the 3rd angle and the two remaining sides.

Questions:

1. What is the measure of the 3rd angle for each triangle?

2. What are the measures of the remaining 2 sides for each triangle?

3. Are the triangles congruent?

Part 5

  1. Place two of the straws together forming an angle of any degree for one triangle, and repeat the process for the 2nd triangle.
  1. Use one of the pre-cut angles and place alongside the longer of the sides but not as the included angle.
  1. Draw a segment to connect the 3rd side to the other two sides.
  1. Swing the 8cm straw so that it hits the 3rd side at a different spot in the 2nd triangle as in the first.
  2. Measure the 3rd side and the remaining 2 angles in each triangle.

Questions

1. What is the measure of the 3rd side for each triangle?

2. What are the measures of the remaining 2 angles for each triangle?

3. Are the two triangles congruent?

4. Do you think that you would get different results if you used a different

angle?

Part 6

  1. Place the 3 angles so that they can form a triangle without measuring the sides initially. Draw segments connecting the angles. Repeat the process for the second triangle.
  1. Measure the 3 sides for each triangle.

Questions

1. What are the measures of the 3 sides for each triangle?

2. Are the two triangles congruent?

3. Draw two triangles for each part, and using the correct marks, show which sides

and angles are congruent.

4. Match the correct shortcut for each set of triangles from the following choices, and tell

whether or not the shortcut is valid for proving triangles congruent.

SSS, SAS, AAS, AAA, ASA, SSA

  • S means that the corresponding sides of the triangles are congruent.
  • A means that the corresponding angles of the triangles are congruent.