DESIGN AND DEVELOPMENT ENGINEERS IN ADVANCED ELECTRONICS:

A high-tech small, R &D organization for indigenous development of tomorrow’s electronic systems, applicable for military and space applications, has been organized in India... The organization is currently locatedin Calcutta with possible offices in other major cities such as Bangalore, Hyderabad, and/or Pune. The systems to be designed and developed are truly cutting-edge, extending the state of technologies covering communications, radar, surveillance and navigation areas. The products will have projected markets both in India and abroad and the objective is to develop products superior than what are currently available in the international arena.

The CEO has been operating a similar operation in USA for over 25 years ( and close collaborations with the US organization will be maintained. The Indian entity, however, is an independent Indian organization established under the laws of India. (CORE Scientific Systems, Private Limited).

We are looking for world class, “one of a kind”, engineers,scientists and technicians of various disciplines, who are dedicated and motivated to advance the state of respective technologies. The organization will provide excellent compensation and benefits, and a knowledge based environment allowing individual freedom and growth.

The organization is fully operational and currently involved in supporting the Indian Defense sector. Please note that we are looking for resumes from exceptional individuals and the hiring is immediate. Please indicate the area of specialization on the top of the application.

Please respond to:

CORE SCIENTIFIC SYSTEMS PRIVATE LIMITED

40A Motilal Nehru Road, Kolkata-700029, INDIA

SIGNAL PROCESSING ENGINEER:

Ph.D, M.E/M.Tech in Electronics with specialization in signal processing. Proficiency with Matlab, C and C++ Experiences with designing and developing algorithms and performing sophisticated simulations of complex systems involving signal processing as needed in communication, radar, surveillance and navigation. Thorough understanding of communication type architectures, waveforms and abilities to perform simulations would be involved. StrongMathematical background of signal processing is necessary.Thorough understanding of the basics and relations with real world is essential. Experiences with specifications for hardware (FPGA based) design would be advantageous.

. The areas of specialization should cover some of the following areas: Understanding of communication, navigation architectures, waveforms and abilities to perform simulationsusing MATLAB, Visual C and C++, visualization and GUI implementation. Knowledge and experience with PC architecture, PCI interface, and Drivers would be advantageous. The simulated architectures would be implemented in real time hardware.

Some familiarity with advanced FPGA’s and DSP’s and porting the simulated codes into embedded hardware will be desirable.

Unique opportunities for development of advanced signal processing techniques and applying them into real time systems of national importance.

One signal processing engineer will be selected with specialization and experiences with GNSS systems. ( minimum 3 years)

Multiple positions are available and both experienced and relatively fresh candidates could apply.

SOFTWARE ENGINEER (Windows)

Software engineers with extensive background in C++ algorithms/applications in Windows platform. Strong proficiency with MFC, dot-net applications. Graphical interface and algorithm implementation related with signal processing necessary. There are several positions with experiences in real time windows application, driver development and general software simulation.

. The areas of specialization should cover some of the following areas: Visual C and C++, simulation, visualization and GUI implementation, and PC Networking. Knowledge and experience with PC architecture, PCI interface, and Drivers would be advantageous. Some experiences with Linux may be advantageous.

Candidates with BS,MS or Masters or higher academic degrees as well as those with practical experiences at various stages of the PC based development need apply. We do not require any data base type experiences.

We are looking for experienced software developers, however, candidates with exceptional capabilities with lesser experiences will also be considered for a few positions.

EMBEDDED ELECTRONICS:

Candidate having experiences with PCI family of buses and ability to write real time high-speed data transfer using assembly, advanced DOS, linux etc, as well as understanding windows drivers and interfaces with windows layers. Some experiences with DSP programming and FPGA development may also be helpful for some candidates. Only experienced personnel (with minimum 3 years of experience) need apply.

One experienced FPGA based developer with at least 3 years experience with Xilinx FPGA’s is wanted.

DIGITAL ENGINEERS:

Strong capabilities in design, development and testing of advanced digital systems with speeds up to several GHz. Experiences with high-speed ADC’s, DACs, DSP’s and FPGA’s are essential. Design involves analysis, schematic capture using modern tools.

Interface design for high speed real time transfer using PCI family of buses is involved.

All round capabilities including writing some test software (assembly, C++, etc.) to be able to test the fabricated boards (fabricated using outside vendors) are desirable. Some capabilities with simple driver development may be useful for testing the fabricated boards. Experiences with interface design for USB, Ethernet, IEEE standard interfaces etc. will be advantageous.

Candidates with minimum experience of 5 years in the field of Digital Design need apply.

RF ENGINEER:

RF Engineer having strong backgrounds and experiences with Filter Design of various types for frequencies in the range of VHF to S band. They should be fully conversant with RF front end design including low noise LNA, downconverters, frequency synthesizers, PLL etc. They should be capable of PCB design using standard tools such as CAD, ORCAD, PAD and testing with modern equipment’s such as oscilloscopes, network analyzer, digital scopes, logic analyzer etc. Handling of minor soldering of fine pitch IC’s, ball grids, using modern soldering stations would also be welcome. ( 5 to 10 years of experience)

Business/MarketingManager: with strong aptitude in science and excellent capabilities in communication ( both written and verbal). He must have keen interest and enthusiastic about advanced technologies, should have general knowledge in technology areas and should be able to explain various technology issues to non-technical and technical personnel, should be able to negotiate and manage contractual issues and will act as interface to the client ( mostly Govt. personnel in DRDO, ISRO etc.) . He should also have some managerial qualities and would be able to make independent decisions.Location: Kolkata, Hyderabad, Bangalore.

Desired candidates should have prior experiences in contracting and marketing with the Govt. agencies.

PHYSICIST/MATHEMATICIANS: A physicist and an applied mathematician are needed to join the team of R & D engineers. They should have at least MSc or Ph.D. from reputed Universities. The physicist must have electronics background and must be proficient with software systems for simulation and modeling. He must have experimental background. The mathematician will have strong capabilities in numerical techniques and algorithm developments. Must have software capabilities.

ANTENNA/E.M SPECIALIST:

We are in search of a R.F. Engineer or Physicist with strong background in antenna engineering and/or electromagnetic modeling of antennas. The preferred candidates should have at least M. Tech or M.Sc. ( Ph.D., preferred) with some experiences in e.m. modeling and antenna design. Experiences with FEKO, HFSS, IE3D, NEC etc. would be necessary. Both fresher’s and experienced candidates may apply.