Dear and Respected Shalini
I am sorry to Mr. Gerard Foley, his advice to refer to the is not right. First of all there is lot of difference among electrical, IT hardware and electronics trades. The said site is dedicated to electronics professionals like me and not for the fresh learners.
And I also agree with Ms Anita that 72 hours learning time would not be enough. It should be at least 6 Months for Electrician and 4 Months for IT hardware.
Please find the curriculum developed by me you can find useful
Trade:ELECTRICIAN
HOURS: 101 HOURS 2Months +1 Months =3 Months
Module 1 .Introduction to Electricity 12 HRS
(Theory Part) 4 HRS
Electricity, voltage, current, resistors, voltmeter, ammeter ,uses and generation of electricity, conductors, insulators and their types and applications, types of wires, their size, understanding of electric signs and symbols, fundamental units of measurements of electrical quantity, earthing, advantages of earthing.
(Practical) 8 HRS
- Demonstration of generation of electricity and its transmission (may be via model)
- Demonstration of generation of electricity and its transmission (may be via model)
- Identification of conductors, insulators etc.
- Identification of different types of wires
- Use of Voltmeter, Ammeter, Wattmeter
- Use of Digital Multimeter for measuring voltage, current, resistance, current etc.
(Module 2) Tools and Safety Precaution 6HRS
(Theory Part) 2 HRS
Different tools used their specification and their proper use, Care and maintenance of tools
Electric shock, Personal Safety, First Aid
(Practical)4HRS
1. Demonstration and use of tools
2. Safety Precautions
(Module 3) Electrical Accessories 8 HRS
(Theory Part) 3 HRS
Various electrical accessories like-switches, sockets, lamp holders, ceiling rose, bell switch ,main switch ,mcb, fan regulator, fuses - their different types and applications
(Practical)5 HRS
1. Identification and use of different electrical accessories
(Module 4) Electrical Wiring24 HRS
(Theory Part) 10 HRS
Series and parallel circuits, System of wiring , types of wiring , methods of preparing wiring- cleat, batten, conduit, underground wiring ,one way wiring, two way wiring ,bell wiring, electrical meters
(Practical)14 HRS
1. Preparing simple electrical circuit to glow bulb using switch
2. Prepare circuit of two way (stair case) wiring
3. Prepare a bell circuit
(Module 5) Electrical Lighting Systems6HRS
(Theory Part) 3 HRS
Fluorescent tube light circuit its components –choke, starter and wiring, incandescent lamp, mercury lamps used for street lighting, compact fluorescent lamp (cfl), flood lights
(Practical)3 HRS
- Prepare circuit of fluorescent tube light
- Preparing table lamp
(Module 6)Troubleshooting and fault finding in house wiring5 HRS
(Theory Part) 2 HRS
Different tools used, common house wiring faults and their rectification, use of line tester, use of lamp tester in troubleshooting
(Practical)3 HRS
1. Teacher should create common faults in demonstration circuit and students should rectify them.
(Module 6) Electrical Appliances their working and repairing36 HRS
(Theory Part) 12 HRS
Electric iron, electric oven, heater, mixer, juicer grinder, fans, room cooler, geyser, washing machine, electric kettle, their working and study of common faults and rectification
(Practical)24 HRS
1. Each student should dismantle and understand basic parts and principle and then assemble them
(Module 7) Being Electrician and Having a Shop 4 HRS
Teacher should explain in detail how to have a shop- purchasing of different tools, spare parts and name and address of dealers, trading of different electrical items and appliances, service charges for repair, principle of honesty
(Module 8) Apprenticeship1 Months
Each student should be given 1 month’s apprenticeship training at electrical repairing shop.
Trade: IT HARDWARE
HOURS: 125 HOUSRS 2.5 MONTSH+ 15 DAYS =3 MONTSH
(Module 1) General overview of computer hardware 14 HRS
THERORY7 HRS
Identification of different parts and cards of computer- Motherboard, CPU( central processing unit),different ports inside and outside motherboard and their use, daughter cards, RAM HDD, ( hard disk drive) , DVD r/w , SMPS (switch mode power supply), idea about input and output devices,Monitors, printers, mouse, keyboard, Woofers speakers , microphone (mic), webcam ( general briefing )
PRACTICAL7 HRS
Students should understand different parts of computers ,their use and be individually identify them
(Module 2) Understanding motherboard12 HRS
THERORY3 HOURS
North Bridge, south bridge, CPU, different slots on motherboard and their applications, output input ports of motherboard, working of motherboard in brief
PRACTICAL9 HRS
- Students should understand different parts of computers ,their use and be individually identify them
- Study of various fault in motherboard
(Module 3) SMPS4 HRS
THERORY1 HRS
Introduction to SMPS, Testing of SMPS, and Voltage reading using digital multimeter, use of digital multimeter
PRACTICAL3 HRS
- Students should test the SMPS with pin short method
- Students should measure different voltages coming from SMPS
(Module 4)Input devices3 HRS
THEORY1 HRS
Working of keyboard, mouse etc
PRACTICAL 2 HRS
Student should disassemble keyboard and mouse and study them
(Module 5) Output Devices20 HRS
THERORY 6 HRS
Monitors - introduction to different types of monitors CRT,LCD etc.
Printers-Introduction to different types of printers dot matrix, laserjet , inkjet
PRACTIAL 12 HRS
- Identification of different types of monitors CRT, LCD,TFT.LED their Menu settings
Like brightness, colors, contrast etc.
- Study and Identification of various types of printers
- Study and rectification of common faults in printers
- Refilling of ink in cartage of printer
(Module 6) Storage Devices3 HRS
THEORY1 HRS
Hard Disk Drive, sata. pata, RAM (random access memory), Pendrive
PRACTICAL 2 HRS
- Study of different type of hard disk SATA,PATA(IDE) available in market,jumper setting in IDE.
- Types of RAM and handling of RAM
- Faults due to RAM
(Module 7) PC Assembling24HRS
THEORY6 HRS
Different Tools used, Screw drivers, crimping tools etc. Assembling and disassembling of PC and its various parts, introduction to startup process, BIOS using bios functions and settings, hardware common faults and their trouble shooting
PRACTICAL 20HRS
- Each student should be individually able to assemble and disassemble the pc.
- Testing of PC
- How to open BIOS? Various settings of BIOS.
- Clearing of BIOS.
- Detailed study of common computer hardware faults
(Module 7) Windows Installation 24HRS
THEROTY4 HRS
Installation of different versions of windows - windows xp, windows 7 , formatting hard disk installation of different applications like MS office, printer drivers, backup of data, installation of other commonly used windows utilities like winzip, adobe acrobat reader, antivirus programs, CD/DVD writing tools etc and their use.
PRACTICAL20 HRS
- Each student should individually install os windows on pc
- Install other application programs on pc.
(Module 8) Computer Networking 20 HRS
THEORY6 HRS
What is networking? Local area network, Internet, email, types of networking, switches, routers,
Cabling,straight, cross, connectors, IP address, ping utility etc.
PRACTICAL 14 HRS
- Making of straight and cross cables using crimping tools.
- Connecting two pc using cross cables.
- Configuring LAN of at least 5 computers using network switch
- Common problems in networking, using ping utility.
(Module 9) Being a computer Hardware Technician and having shop4 HRS
Teacher should prepare students collecting different tolls, address of various dealers, commonly used spare parts and where they can purchase, and handling customers, service charges, and principle of honesty.
(Module 10) Apprenticeship15 Days
Each student should be given 15 days apprenticeship training at computer hardware shop.
Thanks & Regards
RAJEEV MEHNDIRATA
1