LABELING SITE SURVEY
Date of Survey: / Performed By:
Company: / Distributor:
Company Contact: / Distributor Contact:
Phone Number: / Phone Number:
Fax Numbers: / Fax Numbers:
Email Address: / Email Address:

LABELER MODEL

APPLY ONLY
LS-500P Passive apply only system: Media size range: Width 1" – 5" Length 1" - 6" Max Speed:1200”/min
LX-500P Passive apply only system: Media size range: Width 1" –4" Length 1" - 8" Max Speed:800”/min
LS-600 Apply only system: Media size range: Width 1/2” x 5-3/8" Length 3/4" – 8+"
LS-600W Wide frame: Media size range: Width 1/2"- 9" Length ¼” – 8+"
LS-600DT Apply only dual tamp, corner wrap, and front-side-back only label. Media range: Width 1/2” x 5-3/8" Length 3/4" – 8+"
PRINT AND APPLY
LX-80* Print & apply system with Universal Yoke Stand: Media size range: Width: 1" – 4" Length: 6"
*Sato Lt408 printer only, recommended for single shift operation.
LX-800 Print & apply system with Universal Yoke Stand: Media size range: Width: 1" – 6.6" Length: ½" - 14"
LX-800DT Print and apply dual tamp, corner wrap, and front-side-back only label). Maximum print width: 6.6” w/Zebra printer
LX-800RT Print and apply Random Height cartons. Maximum print width: 6.6” w/Zebra printer

APPLICATOR

Tamp Tamp-Blow Blow Touch-N-Go Dual Tamp Corner Wrap
Custom LOVESHAW RECOMMENDATION

PRINTER SPECIFICATIONS (Not Applicable)

MODEL / SATO M-8485 Se (Print Area: Minimum Width 1”Maximum Width 5”) Print Resolution: 203dpi @ 12”/second
M-8490Se (Print Area: Minimum Width 1” Maximum Width 4.4”) Print Resolution: 305dpi @ 8”/second
M-8460Se (Print Area: Minimum Width 2” Maximum Width 6”) Print Resolution: 203dpi @ 8”/second
M-8459Se (Print Area: Minimum Width 1” Maximum Width 4.4”) Print Resolution: 203dpi @ 5”/second
(M-8459Se is Direct Thermal Only)
MODEL / ZEBRA170PAX4 (Print Area: Minimum Width 3”Maximum Width 6.6”)
110PAX4 (Print Area: Minimum Width .5”Maximum Width 4.1”)
Choose print resolution: 203dpi (12”/second print speed) 300dpi (8”/second print speed)
LOVESHAW RECOMMENDATION
Printing Method: Thermal Transfer Direct Thermal
Printer Interface: Serial Parallel Ethernet Wireless USB

LABEL DESCRIPTION

Label 1: (W) X(F) Label 2: (W) X(F) / Label 3: (W) X (F) Label 4: (W) X (F)
Label Material: Paper Film Foil EAS RFID Transparent = Eye mark Yes No
Label Adhesive: Permanent Removable / Other:Perforations between labels Fan Folded Stock
Rolled Stock Butt-Cut between Labels (Eye mark required) Other

LABEL PLACEMENT

VERY IMPORTANT
COMPLETE ACCURATELY
Label Placement:Right to Left flow
A B C D E F G H
I J K L M N O P
OR
Label Placement: Left to Right flow
A B C D E F G H
I J K L M N O P /

Label Placement Accuracy: 1/32” 1/16” 1/8” Other
Products Labeled Per Minute: Min: per minute Max: per minute

PRODUCT DESCRIPTION

Type of product being labeled: carton pallet bottle other
Type of surface: flat curved recessed other
Size of product in inches & Weight of product in pounds:
Carton/Product 1:(L)x(W)x(H) Weight: lbs
Carton/Product 2:(L)x(W)x(H) Weight: lbs
Carton/Product 3:(L)x(W)x(H) Weight: lbs
Carton/Product 4:(L)x (W)x(H) Weight: lbs
Condition of environment at time of labeling:
clean dry cold: Temp dusty damp other

PRODUCT HANDLING SPECIFICATIONS

EXPLAIN HOW CARTON/PRODUCT WILL BE PRESENTED TO LABELING SYSTEM (ie hand fed through case taper to labeler)
Conveyor: Existing Supplied by Distributor Supplied by Loveshaw
Conveyor/Case Sealer Width: Center Justified Edge Justified
Maximum distance from outside edge of conveyor/case sealer to product/carton/pallet:
Speed of Conveyor: Min: feet/minute Max: feet/minute
Product Flow: Continuous Intermittent
Belt Height of Conveyor: Inches from Floor
Product Spacing: Distance Between Cartons/Products inches
Cartons/Products: Uniform sizes Random sizes

MOUNTING STRATEGY

Height of label placement? (Measure from ground to bottom of label as it resides on product/box/pallet, or if applicable, top of product/box/pallet): ”
LS500P / LS600 / LX800 / Label Form:
A, B, C, & D
Right Hand - Overhead or Inverted / AB
C D
Left Hand - Overhead or Inverted / AB
CD
Right Hand – Side Mount / D
Left Hand – Side Mount / C
Right hand – Nose Up / A
Right hand – Nose Down / B
Left Hand - Nose Up / A
Left Hand - Nose Down / B
Right Hand vs. Left hand
FOR LX800DT / LS600DT ONLY
Right Hand
LX800DT/LS600DT

Roll Form D / LSKIT-921
mount required
LS600DT only /
Left HandLX800DT/LS600DT

Roll Form C / LSKIT-921
mount required
LS600DT only /
Left HandLX800DT/LS600DT

Roll Form C / LSKIT-921
mount required
LS600DT only /
Right HandLX800DT/LS600DT

Roll Form D / LSKIT-921
mount required
LS600DT only /

LOVESHAW

2206 Easton Turnpike, Box 83, SouthCanaan, PA18459

Tel: (800) 572-3434 ext. 3056 Fax: (570) 937-4370

Email: dpritzlaff@loveshaw Website:

1