CLUSTEREngineering and Technical

COURSEARC Welding

WVEIS CODE 1981

ONET Codes and Occupations

ONET: 51-4121.06- Welders, Cutters, and Welder Fitters

Course Description:

The Skill Sets in this course are the testing procedures and certification processes included in a Career and Technical Welding concentration. Incorporated into this course are certification in SMAW, GMAW, FCAW, and GTAW.

This course is recommended as an Elective in Welding Technology .

SKILL SETS

SMAW Fillet and Groove Welding

GMAW Fillet and Groove Welding

FCAW Fillet and Groove Welding

GTAW Fillet and Groove Welding

ARC Welding WVEIS 1981

Skill Set / SMAW Certification
Knowledge Objectives
1981.1 / Students will demonstrate knowledge of
  • repairing defects in welds and base metal.
  • perform fillet and groove welds on carbon steel..
  • evaluate test results according to WV welding certification standards.

Performance Objectives
1981.2
1981.3
1981.4
1981.5
1981.6 / Students will
  • correct surface flaws on welds and base metals.
  • present fillet welds in all positions on plain carbon steel.
  • perform groove welds in al positions on plain carbon steel to WV state certification requirements.
  • perform groove welds on carbon steel pipe according to WV state certification requirements.
  • evaluate test coupons according to criteria of WV state certification procedures.

Skill Set / GMAW Certification
Knowledge Objectives
1981.7 / Students will demonstrate knowledge of
  • repairing defects in welds and base metal.
  • perform fillet and groove welds on carbon steel..
  • evaluate test results according to WV welding certification standards.

Performance Objectives
1981.8
1981.9
1981.10
1981.11
1981.12 / Students will
  • correct surface flaws on welds and base metals.
  • present fillet welds in all positions on plain carbon steel.
  • perform groove welds in al positions on plain carbon steel to WV state certification requirements.
  • perform groove welds on carbon steel pipe according to WV state certification requirements.
  • evaluate test coupons according to criteria of WV state certification procedures.

Skill Set / FCAW Certification
Knowledge Objectives
1981.13 / Students will demonstrate knowledge of
  • repairing defects in welds and base metal.
  • perform fillet and groove welds on carbon steel..
  • evaluate test results according to WV welding certification standards.

Performance Objectives
1981.14
1981.15
1981.16
1981.17 / Students will
  • correct surface flaws on welds and base metals.
  • present fillet welds in all positions on plain carbon steel.
  • perform groove welds in al positions on plain carbon steel to WV state certification requirements.
  • perform groove welds on carbon steel pipe according to WV state certification requirements.
  • evaluate test coupons according to criteria of WV state certification procedures.

Skill Set / GTAW Certification
Knowledge Objectives
1981.18 / Students will demonstrate knowledge of
  • repairing defects in welds and base metal.
  • perform fillet and groove welds on carbon steel..
  • evaluate test results according to WV welding certification standards.

Performance Objectives
1981.19
1981.20
1981.21
1981.22
1981.23 / Students will
  • correct surface flaws on welds and base metals.
  • present fillet welds in all positions on plain carbon steel.
  • perform groove welds in al positions on plain carbon steel to WV state certification requirements.
  • perform groove welds on carbon steel pipe according to WV state certification requirements.
  • evaluate test coupons according to criteria of WV state certification procedures.

1