Category 5 – Kiosks

Item / Picture / Pictures
Dimension / Color / Additional Specifications
7 / Kiosk Cabinet （No post on Platform） / / Size：30.5"W x 25.5" H 13.40"D Top platform: 16.15"D 3 MDF Shelves: 22.3" x 13.19" x .40" Thick Distance: 6.7" / Hard Powder coat in Black / 1. Welding firm. No deformation. 2. Surface is flat. No scratch. 3. Powder coating in hard black. No Peel off 4. Use strong feet with rubber base.(pack separately) /
8 / Kiosk
Writing Table （Outside W8") / / Size：11 13/16"x11 13/16"H 11 13/16"D. With printed Logo &3mm clear Acrylic on top surface. Packing: 1/case with Screws & Wrench put in Cabinet / Black / 1. Outside W:8" 2. Assembled with three screws. 3. No gap between behind Post.
4. Printed Logo &Clear Acrylic plate on top. /
9 / Metal Door w/Hinge (Use strong Magnets) / / 1. Three Strong Magnets &Two assembled hinges &Handle on door. 2. Printed Logo &Three PET Pockets on door. / Black / 1. Flat surface 2.Two hinges assembled on door. 3. Test the holes on cabinet to fit hinges. 4. 1/case /
10 / Acrylic Box (Tiered play slip holder) / / 1. Tiered play slip holder (as per last sample).
2. With good quality adhesive magnets for Acrylic(as per the sample we sent) / Clear / 1. 06 Good quality Black magnets on base
11 / Graphic (Tall one is two- piece style) / / Size ：Tall:28.75"x25” 12.20"x25" Two pieces with 21.65" x 9.45" PET Pocket. Short: 24" x25" Printing on .12" PVC Foam board. / PMS Yellow109 / 1. Black part is flush with writing table. /
Packaging / Components in Single box.
Put in Cabinet.
Cabinet: in .79" PE clamshell + thicker AAA Cartons. / AAA Cartons / 1. Check each component 2.Carton with label: Up arrow & handle with care.
Components / In Cabinet：
1. Writing Table w/Screw Wrench.
2. Three posts &Screw & driver for WA2
3. Three MDF shelves
4.Three Acrylic Holders 5.Assembly instruction & Four feet Out of Cabinet (in clamshell)：
1. Tall graphic Holder &Screw & driver for WA1.
2. Graphic.
3. Metal Door.
Ref： / / /

*Note: If your product does not meet the required specifications described in Category 5, Items 7-13, Attach a separate sheet to your sealed bid with the reasons if not as specified. Identify the sheet with the header “Category 2, Reasons not as Specified”.

IFB 09014

Appendix E, Product Specifications