BRUNING PAINT CO INC -- 521-04 NEUTRAL BASE SILATHANE INT/EXT BRUTONE INTERIOR -- 8010-00F042905
======Product Identification ======
Product ID:521-04 NEUTRAL BASE SILATHANE INT/EXT BRUTONE INTERIOR
MSDS Date:08/01/1993
FSC:8010
NIIN:00F042905
MSDS Number: CDCVC
=== Responsible Party ===
Company Name:BRUNING PAINT CO INC
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224-4347
Country:US
Info Phone Num:410-342-3636/3641
Emergency Phone Num:410-342-3636/3641
CAGE:EO376
=== Contractor Identification ===
Company Name:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company Name:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520
======Composition/Information on Ingredients ======
Ingred Name:STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 20-25%
Other REC Limits:525 MG/CUM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Ingred Name:ALIPHATIC PETROLEUM DISTILLATE*93-4*
CAS:64742-38-7
Fraction by Wt: 7.5-10%
OSHA PEL:2625 MG/CUM
ACGIH TLV:525 MG/CUM
Ingred Name:PIGMENT
Other REC Limits:10 MG/CUM (DUST)
Ingred Name:WEIGHT PER GALLON IN POUNDS: 10.4
RTECS #:9999999WG
Ingred Name:VOL ORGANIC CMPD: 3.401 LBS/GAL
RTECS #:9999999VO
======Hazards Identification ======
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NOOSHA:NO
Health Hazards Acute and Chronic:REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS MAY CAUSE PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS MAY BE HARMFUL/FATAL. MAY CAUSE NOSE, THROAT & EYE
IRRITATION. INTOXICATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, HEADACHES, INTOXICATION,
UNCONSCIOUSNESS
======First Aid Measures ======
First Aid:EYES: FLUSH W/LUKE WARM WATER FOR 15 MINS. SKIN: FLUSH
W/COPIOUS AMOUNTS OF LUKE WARM WATER. INHALATION: REMOVE TO FRESH
AIR. RESTORE BREATHING. INGESTION: RINSE MOUTH IMMEDIATELY. GIVE
6-8 OUNCES OF LIQUID. NEVER GIVE ANYTHING BY MOUTH IFUNCONSCIOUS.
DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
======Fire Fighting Measures ======
Flash Point Method:TCC
Flash Point:104F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:USE NFPA CLASS 1B FOR EXTINGUISHING FLAMMABLE
LIQUID FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE
USED TO COOL CLOSED CONTAINERS WHEN EXPOSED TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZLES ARE PREFERRED.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM IGNITION SOURCES. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT.DON'T APPLY TO HOT SURFACES. (SEE SUPP
======Accidental Release Measures ======
Spill Release Procedures:USE NON-SPARKING TOOLS FOR CLEANUP. COVER
W/INERT MATERIAL TO REDUCE FUMES. KEEP OUT OF DRAINS,
SEWERS/WATERWAYS.
======Handling and Storage ======
Handling and Storage Precautions:DON'T STORE >120F. GROUND CONTAINERS
WHEN POURING & LIMIT FREE-FALL TO A FEW INCHES. EMPTY CONTAINERS
MAY CONTAIN HAZARDOUS PROPERTIES.
Other Precautions:DON'T CUT/PUNCTURE CONTAINER. DON'T WELD NEAR
CONTAINER. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. USE ONLY
W/ADEQUATE VENTILATION. AVOID CONTACT W/EYES & SKIN. AVOID
PROLONGED/REPEATED BREATHING OF VAPORS.
======Exposure Controls/Personal Protection ======
Respiratory Protection:OUTDOOR/OPEN AREA: NIOSH/MSHA APPROVED
MECHANICAL FILTER RESPIRATOR DURING SPRAY APPLICATION. RESTRICTED
AREA: NIOSH/MSHA APPROVED CHEMICAL-MECHANICAL FILTERS. CONFINED
AREA: NIOSH/MSHA APPROVED AIR L INE TYPE RESPIRATORS/HOODS.
Ventilation:AS REQUIRED TO CONTROL VAPOR CONCENTRATIONS. GENERAL
DILUTION/LOCAL EXHAUST TO KEEP TLV BELOW ACCEPTABLE LIMIT.
Protective Gloves:NATURAL RUBBER/NEOPRENE/BUNA/NITRILE
Eye Protection:GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY BEFORE EATING & USING WASHROOM.
Supplemental Safety and Health
VOLATILE BY VOLRANGE: 50.96-57.73. FIRE HAZ CONT'D: NEVER USE
WELDING/CUTTING TORCH ON/NEAR CONTAINER, RESIDUE MAY IGNITE
EXPLOSIVELY. CONTAINERS SHOULD BE COOLED W/WATER TO PREVENT VAPOR
PRESSURE BU ILDUP RESULTING IN CONTAINER RUPTURE.
======Physical/Chemical Properties ======
Boiling Pt:B.P. Text:300-416F
Vapor Pres:2
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU ACETATE
Percent Volatiles by Volume:(SUPP)
======Stability and Reactivity Data ======
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, HOT SURFACES,
ELECTRICAL EQUIPMENT & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN
======Disposal Considerations ======
Waste Disposal Methods:DON'T FLUSH TO SEWER, WATERSHED/WATERWAY.
DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.