Bid Specifications for Ventrac 4231TD articulating tractor with Cab and Front Rotary Broom.
Ventrac 4231TD:
Engine:Make: Briggs & Stratton Vanguard
Horsepower31 diesel – Turbo Charged
Cylinder3 – Liquid Cooled
Engine Disp.953 cc
Bidder Exceptions: ______
Dimensions:Wheelbase43”
Width48” (70” with dual tire option)
Length79”
Height67” (top of ROPS)
Weight1630 lbs
Turning radius43”
Fuel capacity7.25 gal.
Bidder Exceptions: ______
Frame:Center pivot articulating / 8” oscillating
Bidder Exceptions: ______
Hydraulics:TransaxlePeerless 2600 – two speed
Axle40 mm,forged (w/hub)
Hydraulic filtration25 Micron suction
10 Micron pressure
Hydraulic coolingStandard
Bidder Exceptions: ______
Powertrain:DriveAll wheel drive (AWD)
TransmissionHydrostatic – 2 speed
S.D.L.A. hand control
(foot control – optional)
Travel Speed10 mph - high range
5.2 mph - low range
10 mph – reverse high range
5.2 mph – reverse low range
Steering Power steering – hydraulic
Bidder Exceptions: ______
Ventrac 4231TD – Bid Specs
PTO:DriveV-pulley, B-belts
ControlsElectric w/automatic brake
Bidder Exceptions: ______
Brake:ParkingBand, 16 sq in
Bidder Exceptions: ______
Electrical:
Cranking450 amps
Battery12-V / 40 amps
Bidder Exceptions: ______
Tires:StandardAll-terrain 22x12-8
Bidder Exceptions: ______
Other Features:
Roll BarROPS Certified
Fold Down
SeatSuspension seat w/ Arm rest
Weights4 – weights standard
Weight transferStandard
Actuatorfront mount,
12 volt
Switch on dash
4 prong plug
Bidder Exceptions: ______
Ventrac 4231TD – Bid Specs
Attachments to be included:
Cab:
Designed to fit the VENTRAC 4231TD tractors
Dimensions:
Length:58 inches (147 cm)
Length w/Tractor:90 inches (229 cm)
Width:50.5 inches (128 cm)
Height on Tractor:80.5 inches (205 cm)
Height on Tractor w/Strobe:84.5 inches (215 cm)
Weight: 330 lbs (150 kg)
Bidder Exceptions: ______
Standard Features:Tempered safety glass, removable doors, heavy duty front wiper, interior lighting, venting windows, contoured molded roof, rubber isolated cab mounts, 4-point seat belt, head rest, conveniently located switches in roof.
Bidder Exceptions: ______
Additional Options to be included: Front and rear work lights, hinged strobe light beacon, heater kit, defrost fan, directional lights
Bidder Exceptions: ______
Options for future installation: Exterior mirror kit
Bidder Exceptions: ______
HB580 - Power Broom:
Designed to fit the VENTRAC 4231TD tractors and is for sweeping and
removal of snow, leaves, dirt, light gravel and thatch. A corner-less frame
design permits sweeping against curbs and allows for the cleaning of
corners.
Bidder Exceptions: ______
Dimensions:
Length:53 inches (135 cm)
Width:68 inches (172 cm)
Height:24 inches (61 cm)
Working Width:58 inches (147 cm)
Weight: 382 lbs (173 kg)
Bidder Exceptions: ______
Ventrac 4231TD – Bid Specs
Standard Features: Forward & reverse brush rotation with electric actuator, 12 volt switch and plug kit, 2 adjustable / 9 inch diameter gauge wheels, 22 inch (55.9 cm) nylon broom diameter, 220 max broom rpm @ 3200 engine rpm, corner-less fram on both sides.
Bidder Exceptions: ______
Optional Attachments:
MJ840 – Contour Mower Deck:
Front Mounted 84 inch mowing deck designed to fit the Ventrac 4231TD tractor.
Bidder Exceptions: ______
Dimensions:
Length:52 inches (132 cm)
Width:84 inches (213 cm)
Height:22 inches (56 cm)
Weight: 584 lbs (173 kg)
Bidder Exceptions: ______
Standard Features:
Deck Type: Front Mount, 3 deck system
Deck Suspension: 4 front flat-free tires with 3 full
rear rollers
Number of Blades/type: (3) 15 inch (38 cm) right hand low
lift & (3) 15 Inch (38 cm) left hand
low lift
Cutting Height Range: ¾ inches to 3½ inches
Cutting Positions: 12
Cutting Height Adjustment: Multi-point, ¼ inch increments
Deck Construction: Multi-gauge construction
Decks Motion: Front-to-Back with40 degrees up
and down side decks (+20
degrees/-20 degrees)
Spindles/Pulleys: Field serviceable with top grease
Fittings
Anti-scalp Rollers: 5, 3 position adjustable
Discharge Type: Rear discharge, with flexible
Deflector
Drive: Belt powered gear box
Service: Flip up deck for easy clean out
and changing of blades
Bidder Exceptions: ______
Ventrac 4231TD – Bid Specs
Dual Wheel Kit:
Designed to fit the Ventrac 4231TD tractor. To increase stability, traction and safety on slopes. Able to use Ventrac 4231TD on a 30 degree slope.
Bidder Exceptions: ______
Specifications:
Tread Type: All Terrain
Weight: 80 lbs (36.25kg)
Additional Tractor Width: 24 inches (12 inches/tire) (61 cm)
Bidder Exceptions: ______
HM722 – 72 Inch Side Discharge Mower Deck:
Front Mounted 72 inch mowing deck designed to fit the Ventrac 4231TD tractor.
Bidder Exceptions: ______
Dimensions:
Length:58 inches (132 cm)
Width:85 inches (213 cm)
Height:16 inches (56 cm)
Weight: 450 lbs (173 kg)
Bidder Exceptions: ______
Standard Features:
Deck Type: Front Mount
Deck Suspension: 2 front tires (13x5.0x6 Inches)
1 full width rear rollers
Width of Cut: 72 inches
Number of Blades/type: (3) 24-¾ inch (63 cm) low lift
Cutting Height Range Low Position: 1-1/8 inches to 4-1/8 inches
Cutting Height Range High Position: 1-3/4 inches to 4-3/4inches
Cutting Positions: 13
Cutting Height Adjustment: Single Lever, Quick Select
Deck Construction: Multi-gauge, 5/16 inch at spindle mount
Spindles/Pulleys: Field serviceable with top grease
Fittings
Anti-scalp Rollers: Front Center
Discharge Type: Side discharge, with rubber flexible
Deflector
Drive: Belt powered gear box
Service: 90 degree flip up deck for easy clean
out and changing of blades
Bidder Exceptions: ______
Ventrac 4231TD – Bid Specs
Steiner Attachment Set-up: Vendor will match up the correct belts and
properly set up all current Steiner Attachments (listed below) to the New Ventrac 4231TD. The Vendor will pick up the attachments and return them when complete.
Steiner Attachments: Aerator – Model # AR240
Trencher – Model # TH 300
Hydraulic Angle Plow Blade – Model # BD260
Brush Deck – Model # RC466
Snow Blower – Model # SB348
Power Blower – Model # PB100
Warranty:
2-Year Commercial Limited Warranty, 3000/4000 series tractors and attachments, 2 years with unlimited hours
Engine WarrantyCovered by engine manufacturer, Briggs 3/LC = 2-year w/ 3rd major parts only
Ventrac equipment, including defective parts, must be returned to your authorized Ventrac dealer within the warranty period. The warranty extends to the cost to repair or replace (as determined by V.P.I.) the defective part. The expense of pickup and delivery of equipment, service call drive time or any transportation expense incurred for warranty repair is the responsibility of the owner. Proof of purchase may be required. Warranty work must be completed by an authorized Ventrac dealer. Ventrac dealers attend factory service school and Briggs engine training, as well as maintaining Authorized Servicing Dealer status with Kawasaki. This warranty extends only to Ventrac turf equipment operated under normal conditions and properly serviced and maintained. The warranty does not cover repair of damage due to normal use, wear and tear, maintenance services, repair of damage related to abuse, neglect, accident or use of the turf equipment which is not in accordance with operating instructions in the operator’s manual, or damage resulting from repair of Ventrac turf equipment by person or persons other than an authorized Ventrac service dealer or the installation of parts other than genuine Ventrac parts or Ventrac recommended parts.
Bidder's Exceptions:______
VENTRAC 4232TD
2010 (or newer) Ventrac 4231TDarticulating tractor, equipped with a 31 hp, 3 cylinder, liquid cooled, turbocharged Briggs & Stratton Vanguard engine, all wheel drive, all-terrain tires, 7.25 gallons fuel capacity, 43 inch turning radius, power steering, electric engagement PTO with brake, full suspension seat, foldable ROPS, All-Weather Cab with front & rear work lights, strobe beacon, console mounted fan/heater/filter, directional defrost, directional signals/flashers, Snow/Debris Broom with 12 volt actuator allows brush to run in reverse and at slower speeds, 30 degree left/right hydraulic angle, 58 inch working width and a 2 year commercial warranty with unlimited hours on tractor and all attachments. (39.51205, 47.0231-99, 70.2004-99, 53.0077, 70.2006, 70.2006-1, 702006-3, 70.2006.51, 70.2006-6, 39.55400, 70.8025, 70.4039)
$______
Options:
Dual Wheel Kit, Duals Field Trax (70.4067)$______
84” Contour Rear Discharge Mowing Deck (93.55160)$______
72” Side Discharge HM, HM722 (39.55106) Complete Mower Deck
$______
Steiner Attachment Set-up – match up the correct belts and properly set up all current Steiner attachments to the New Ventrac 4231TD. The Vendor will be responsible for picking up the attachments and returning them when complete. $______
ALTERNATE:
Demo Model - 2010 (or newer) Ventrac 4231TDarticulating tractor, equipped with a 31 hp, 3 cylinder, liquid cooled, turbocharged Briggs & Stratton Vanguard engine, all wheel drive, all-terrain tires, 7.25 gallons fuel capacity, 43 inch turning radius, power steering, electric engagement PTO with brake, full suspension seat, foldable ROPS, All-Weather Cab with front & rear work lights, strobe beacon, console mounted fan/heater/filter, directional defrost, directional signals/flashers, Snow/Debris Broom with 12 volt actuator allows brush to run in reverse and at slower speeds, 30 degree left/right hydraulic angle, 58 inch working width and a 2 year commercial warranty with unlimited hours on tractor and all attachments. (39.51205, 47.0231-99, 70.2004-99, 53.0077, 70.2006, 70.2006-1, 702006-3, 70.2006.51, 70.2006-6, 39.55400, 70.8025, 70.4039)
$______