for the development and approval of curricula / COD: SEAQ
PL–U.02 / Revision
Approved in the Senate meeting on:17.09.2012
5 / 6 / 7 / 8 / 9 / 10
ANNEX 1
CURRICULUM
Beginning with the academic year 2014 - 2015
UNIVERSITY OF ORADEA
FACULTY OF ENERGY ENGINEERING AND INDUSTRIAL MANAGEMENT
License’sDegree program: INDUSTRIALECONOMICALENGINEERING
Fundamental Field: ENGINEERING SCIENCES
Undergraduate Field: ENGINEERING AND MANAGEMENT
SecondaryMaster’s Field: (if existing)
Duration of studies / no. of credits: 4 years / 240 credits
Type of education: full-time learning (IF)
- Missionof the study program "Industrial economical engineering"
Missionof the study program"Industrial economical engineering"belonging to the domain of"Engineering and management"present a particularly complexby includingteaching and researchactivitiesat the level ofdepartmentand disciplines, providingtechnical and managerialtraining programsintextile andleather industry, pursuing preparingprofessionals fortechnicaland economicmanagement activities, ofdesignandmanufacturing systems oftextile andleatherrelated products, market research, initiatingand conductingrelatedbusinessfield anditsrelated services. Itaims to achievea wideopeningsto theEuropean systemof values,both in terms ofspecialized trainingas well asinthe education.
This missionconstitutes the reasonof beingof ahigher technicalschool, gaining particular importancetoday.It requiresthat everyone involvedin the trainingof engineersto grant aspecial attention to theefficiencyof economic activity. Technicaltrainingaspectsshould not beseparated fromeconomic reality anditsrequiredperformance. The present projection interms of the futurecan bemade onlyin the context ofthe acquisitionof wideeconomicknowledgeengineeringframeworks.
- The objectives of thestudy program "Industrial economical engineering"
The strategic objectiveof the study program"Industrial economical engineering"is toperformmodern and efficient teaching andresearch activitiesat internationalstandards ofexcellence, to contribute to shapingagraduateprofilethataims to developtheknowledge, skills andcognitive abilitiesinEngineering and management, whichalsoallowto integrateat the level ofmanagementstructuresthat requirecollaborationwith expertsfrom varioussectors of the economy, particularly those inindustrial engineeringand information technologysectors.
The graduateof the study program"Industrial economical engineering" will haveadequateknowledge offundamental,technicaland economicandregulatory issuesaimedfromsphere ofengineeringmanagement, knowledge thatwillhelp them understandand to interpreteconomic efficiency andtechnical efficiency, offering optimal solutionsregardingthe impact oftechnologicaland managerialprocesseson the environment,economy and society.
Specific objectiveswithin thestudy program„Industrial economical engineering” refer to the knowledgeacquired bygraduatesconcerning:
- Generaleducation(communication,foreign languages)
- Fundamentaltraining(mathematics, physics, chemistry, basic economics)
- Preparinggeneral technique(industrial design, mechanical engineeringfundamentals, electrical)
- Computer technology(use of computers, programming basic andadvancedlevel, Internet and multimediatechniques)
- Computer aided design(CAD) ingarments, knitwear, footwear and leather goods
- Fundamentaltrainingintextile andleather industry (fiber and textilestructures, the structure and design ofknitted fabrics, apparel textiles, shoes and leather goods, raw materials, metrology intextile-leather)
- Technical processesintextile- leather(leather manufacturingprocesses, technologies and knittingmachines, technologies and equipmentinclothing, textilefinishing)
- Generallegislation(law and economiclaw, labor law, competition law)
- Economy andfinance(accounting,businesseconomics, finance and credit,economic analysisof production systems)
- Management andmarketing(management,strategic management, financial, environmental management, quality, production, human resources management, information systems management, marketing, organization of production, logistics)
- Ethicsandresponsibilitytowards societyand the environment.
- Competenceswhich will beacquiredafter graduation:
Professionals
- Carrying out of calculations, demonstrations and applications for specific tasks solving of engineering and management based on fundamental and engineering sciences knowledge (C1);
- Elaboration and approaching of technical, economical and managerial documentation(C2);
- Useof software andinformation technologytosolvingspecificengineering andmanagementtasks(C3);
- Economic evaluation, planning and managementof processes andlogistics and productionsystems (C4);
- Resourcemanagementorganization, quality assurance production andmanagementorganizational development(C5);
- Technical - economical designandindustrialproduct and processimprovement(C6).
Transversals
- Responsible accomplishment of principles, norms and values of professional ethics in performing the professional duties and objectives to be achieved, available resources, work stages, completion time, terms of achievement and associated risks(CT1);
- Identification of roles and responsibilities in a multidisciplinary team and application of techniques of relating and effectively work within the team(CT2);
- Identifying of continuous training opportunities and efficient application for own development, of information sources and communication and assisted training resources (Internet portals, software applications, databases, online courses, etc.) both in English and in an international language as well(CT3).
- Finalities1
1 - Graduates of theundergraduate studiesprogramwillaccess the followingoccupationsaspossible"Classification of Occupations in Romania"– ISCO – 08:
Pagina 1 din 15
University of Oradea / PROCEDUREfor the development and approval of curricula / COD: SEAQ
PL–U.02 / Revision
Approved in the Senate meeting on:17.09.2012
5 / 6 / 7 / 8 / 9 / 10
Secondaryschool teacher-232201;
Educationspecialtyreviewer-235204;
Trainer-241205, HRSpecialist-241216;
Logisticianflowmanagement-241,301;
Developersproduction/manufacturinglauncher-241302;
Authorizinglogistics documentary-241303;
Purchasesanalyst/ consultantsuppliers-241401;
ReferentExternal Relations-241913;
Project Manager -241919;
MarketingSpecialist-241921;
Assistantdirector/responsible foroperation(studiessup.) -241924;
Specialistimprovementprocesses-241928;
QualitySpecialist-242301;
Standardization assistant-242313;
Specialist in the field ofcomputeraided design-213907;
InstallationEngineer-214404;
ProductionEngineer-214409;
Mechanical Engineer-214501;
Mechanical Engineertechnological equipmentoil-214,514;
EconomistEngineer-244109;
MarketingspecialtyReferent-244703;
BrandManager-244707;
Mechanical engineertextiletechnological equipment-214,516;
AdvisorMechanical Engineer-214533;
ExpertMechanical Engineer-214534;
Specializedreviewermechanical engineer-214536;
MechanicalDesignEngineer-214538;
Mechanicalmaintenanceindustrial equipments specialist-214544;
Engineer/Junior Engineertechnologistmachining-214545;
Concept/ designcao-214902;
DocumentationSpecialiststudies-214904;
Instructorproduction system-214905;
Responsiblebusiness-214907;
Engineertextile, leather -215102;
Designengineertextile, leather -215105;
Specialtyinspectorengineertextile, leather-215108;
Specializedengineerreviewertextile, leather-215109;
Program Director-121013;
Chief engineermining andmanufacturing-122202;
Chiefmining andmanufacturingsector-122,206;
Chief of Mining &Manufacturing service-122218;
Mining andManufacturingSupervisor-122219;
Chief ofwholesale andretail office-122,404;
AreaManager-122408;
Manager-121029;
Chief of Departmentlogistics documentary-122678;
Chief engineerbusiness firmsand other business services-122,701;
Chief ofCommercialAgency-122702;
Chief ofexhibitions andfairs-122703;
Chief of service/ Office Head ofdamages-122706;
Chief ofserviceand similar-122947;
Chief ofofficeand similar-122950;
Chief ofofficeand retraining-123201;
Head of serviceevaluation oflabor resources-123 206;
HRManager-123207;
Chief of Marketing service-123301;
Chief ofmarketing office-123,302;
Chief ofAuction-123303;
Operationsdirectortransactions-123,304;
Chief ofhousecompensation-123,305;
MarketingManager(tariffs, contracts, procurement) -123307;
Advertisingagency,Chief ofadvertising -123401;
Chief ofofficeadvertisements-123402;
Chief ofoffice-supply sales-123,501;
Chief of Supply-sales -123,503;
ProcurementManager-123506;
SupplyManager-123508;
Supplierrelationshipmanager-123,509;
Project Manager-123713;
Leadingsmall business-owner(trustee) Mining andManufacturing service-131201;
Leadersmall business-owner(trustee) in trade-131401;
Leadersmall business-owner (trustee) inbusinessintermediationand other business services-131,701;
Leadersmall business-owner (trustee) for services -131,801;
CSRManager-242324;
Research Assistantinprocess equipment-251,521;
Researchengineerengineeringtechnology-251526;
Researchengineerin mechanical engineeringtechnical creativity-251541;
Researchengineermachinery andmechanical appliances-251544;
Researchengineerinspinning-weaving -252102;
ResearchEngineer-knitted textiles-252105;
Chief ofpublic institution-111059;
Chief of Department-111062;
SchoolworkshopChief of-334006;
IndustrialDesigner-347104;
Developersproduction-413204.
Pagina 1 din 15
University of Oradea / PROCEDUREfor the development and approval of curricula / COD: SEAQ
PL–U.02 / Revision
Approved in the Senate meeting on:17.09.2012
5 / 6 / 7 / 8 / 9 / 10
New occupationsare not included inCOR:SoftwareEngineerproductionmanagement,engineerproduction,engineertechno-economicevaluation, logisticsengineer, engineer ofquality assurance,engineerresourcesmanagement.
UNIVERSITY OF ORADEAFACULTY OF ENERGY ENGINEERING AND INDUSTRIAL MANAGEMENT
Licence's Degree Program: INDUSTRIAL ECONOMICAL ENGINEERING
Fundamental Field:
Undergraduate Field: ENGINEERING AND MANAGEMENT
Duration of studies / no. of credits: 4 years/240 credits
Type of education: Full-time learning (IF) / Valid from academic year
2014-2015
Beginning with 1st year of study
CURRICULUM **
Year of study I
Code / Disciplines* / Type / Semester I / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0332 / Linear algebra, analytical and differential geometry / FD / 2 / 1 / - / - / 42 / Ex / 4 / 70
IEMI-0418 / Technical drawing and computer graphics / FD / 3 / - / 2 / - / 70 / Vp / 5 / 70
IEMI-0005 / Chemistry / FD / 2 / - / 2 / - / 56 / Ex / 5 / 84
IEMI-0508 / Mechanics and Material resistance / DD / 2 / 2 / - / - / 56 / Ex / 5 / 84
IEMI-0339 / Basics of Informatics / FD / 2 / - / 2 / - / 56 / Ex / 5 / 84
IEMI-0162 / Computers programming and programming languages I / FD / 2 / - / 2 / - / 56 / Vp / 5 / 84
IEMI-0182 / Foreign Language (English) I / CD / - / 1 / - / - / 14 / Vp / 1 / 14
TOTAL / 13 / 4 / 8 / - / 350 / 30 / 490
IEMI-0030 / Sports I / CD / - / 1 / - / - / 14 / A/R / 1 / 14
ELECTIVE DISCIPLINES
IEMI-0676 / Industrial psychology / CD / 1 / 1 / - / - / 28 / Vp / 2 / 28
IEMI-0176 / Second Foreign Language I / FD / - / 1 / - / - / 14 / Vp / 1 / 14
Code / Disciplines* / Type / Semester II / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0334 / Mathematical analysis / FD / 3 / 2 / - / - / 70 / Ex / 6 / 98
IEMI-0163 / Computers programming and programming languages II / FD / 1 / - / 2 / - / 42 / Vp / 4 / 70
IEMI-0523 / Computer Aided Graphics / FD / 3 / - / 2 / - / 70 / Vp / 6 / 98
IEMI-0146 / Mechanisms and Machinery Organs / DD / 2 / 1 / - / - / 42 / Ex / 4 / 70
IEMI-0017 / Basics Economy / FD / 2 / 2 / - / - / 56 / Vp / 5 / 84
IEMI-0004 / Physics / FD / 2 / - / 1 / - / 42 / Ex / 4 / 70
IEMI-0183 / Foreign Language (English) II / CD / - / 1 / - / - / 14 / Vp / 1 / 14
TOTAL / 13 / 6 / 5 / - / 336 / 30 / 504
IEMI-0031 / Sports II / CD / - / 1 / - / - / 14 / A/R / 1 / 14
ELECTIVE DISCIPLINES
IEMI-0713 / Artistic painting / SD / 2 / - / 2 / - / 56 / Vp / 4 / 56
IEMI-0678 / Philosophy / CD / 2 / 2 / - / - / 56 / Vp / 4 / 56
Legend: C - Course; S - Seminar; L - Practical (laboratory); P - Project; IS - Individual Study;
GD - General Discipline; FD - Fundamental Discipline; SD - Specialized Discipline; CD - Complementary Discipline; FD - Field Discipline; DP - Practical Activities
Type of Examination - Verification Form, Ex. - examination; Cv. - Colloquium, Vp. - Continuous Assessment, Pr - Project; Credits - number of ECTS credits; IS - Individual study.
Head of departament ,
Lecturer Dr. Albu Adina-Victoria
RECTOR,
Professor Dr. Constantin BUNGĂU / DEAN,
Associate Professor Dr.
Gabriel Valentin BENDEA
UNIVERSITY OF ORADEA
FACULTY OF ENERGY ENGINEERING AND INDUSTRIAL MANAGEMENT
Licence's Degree Program: INDUSTRIAL ECONOMICAL ENGINEERING
Fundamental Field:
Undergraduate Field: ENGINEERING AND MANAGEMENT
Duration of studies / no. of credits: 4 years/240 credits
Type of education: Full-time learning (IF) / Valid from academic year
2014-2015
Beginning with 1st year of study
CURRICULUM **
Year of study II
Code / Disciplines* / Type / Semester III / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0336 / Mathematical statistics / FD / 2 / 1 / - / - / 42 / Vp / 4 / 70
IEMI-0693 / Basics of computer aided design / DD / 2 / - / 2 / - / 56 / Vp / 5 / 84
IEMI-0411 / Electrotechnics, electronics and automation / DD / 2 / - / 2 / - / 56 / Ex / 5 / 84
IEMI-0446 / Textile fibers / DD / 3 / - / 2 / - / 70 / Ex / 6 / 98
IEMI-0027 / Fundamentals of Management / DD / 2 / 2 / - / - / 56 / Ex / 5 / 84
IEMI-0547 / Foreign Language (English) III / CD / - / 1 / - / - / 14 / Vp / 1 / 14
TOTAL / 11 / 4 / 6 / - / 294 / 26 / 434
OPTIONAL DISCIPLINES
IEMI-0242 / Engineering of Production Systems / SD / 2 / - / 2 / - / 56 / Ex / 4 / 56
IEMI-0686 / Scheduling and production control / SD / 2 / - / 2 / - / 56 / Ex / 4 / 56
TOTAL / 2 / - / 2 / - / 56 / 4 / 56
IEMI-0032 / Sports III / CD / - / 1 / - / - / 14 / A/R / 1 / 14
ELECTIVE DISCIPLINES
IEMI-0680 / Consumer behaviour / SD / 2 / 2 / - / - / 56 / Vp / 5 / 84
IEMI-0681 / Management of conflicts / SD / 2 / 2 / - / - / 56 / Vp / 5 / 84
Code / Disciplines* / Type / Semester IV / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0424 / Metrology in textile- leather / DD / 2 / - / 2 / - / 56 / Ex / 4 / 56
IEMI-0682 / Textile structures-yarn / DD / 2 / - / 2 / - / 56 / Ex / 4 / 56
IEMI-0499 / Textile structures-knits / DD / 2 / - / 2 / - / 56 / Ex / 4 / 56
IEMI-0416 / Comfort and functions of leather and textile products / DD / 2 / - / 2 / - / 56 / Vp / 5 / 84
IEMI-0683 / Textile structures-fabrics / DD / 3 / - / 2 / - / 70 / Ex / 6 / 98
IEMI-0185 / Foreign Language (English) IV / CD / - / 1 / - / - / 14 / Vp / 1 / 14
IEMI-0425 / Practice / SD / - / - / - / - / 90 / Cv / 2
TOTAL / 11 / 1 / 10 / - / 398 / 26 / 364
OPTIONAL DISCIPLINES
IEMI-0022 / Company’s Economy / SD / 2 / 1 / - / - / 42 / Vp / 4 / 70
IEMI-0684 / The economic environment / SD / 2 / 1 / - / - / 42 / Vp / 4 / 70
TOTAL / 2 / 1 / - / - / 42 / 4 / 70
IEMI-0033 / Sports IV / CD / - / 1 / - / - / 14 / A/R / 1 / 14
ELECTIVE DISCIPLINES
IEMI-0685 / Sociology and psychology of work / SD / 2 / 2 / - / - / 56 / Vp / 4 / 56
Legend: C - Course; S - Seminar; L - Practical (laboratory); P - Project; IS - Individual Study;
GD - General Discipline; FD - Fundamental Discipline; SD - Specialized Discipline; CD - Complementary Discipline; FD - Field Discipline; DP - Practical Activities
Type of Examination - Verification Form, Ex. - examination; Cv. - Colloquium, Vp. - Continuous Assessment, Pr - Project; Credits - number of ECTS credits; IS - Individual study.
Head of departament ,
Lecturer Dr. Albu Adina-Victoria
RECTOR,
Professor Dr. Constantin BUNGĂU / DEAN,
Associate Professor Dr.
Gabriel Valentin BENDEA
UNIVERSITY OF ORADEA
FACULTY OF ENERGY ENGINEERING AND INDUSTRIAL MANAGEMENT
Licence's Degree Program: INDUSTRIAL ECONOMICAL ENGINEERING
Fundamental Field:
Undergraduate Field: ENGINEERING AND MANAGEMENT
Duration of studies / no. of credits: 4 years/240 credits
Type of education: Full-time learning (IF) / Valid from academic year
2014-2015
Beginning with 1st year of study
CURRICULUM **
Year of study III
Code / Disciplines* / Type / Semester V / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0498 / Structure and design of knitwear / DD / 2 / - / 1 / 1 / 56 / Vp / 5 / 84
IEMI-0584 / Control and quality assurance / DD / 2 / - / 1 / - / 42 / Vp / 3 / 42
IEMI-0478 / Structure and design of footwear and leather articles / DD / 2 / - / 1 / 1 / 56 / Ex / 5 / 84
IEMI-0497 / Garments structure and design / DD / 2 / - / 1 / 1 / 56 / Ex / 5 / 84
IEMI-0468 / Raw materials for Leather Ready Made products / DD / 2 / - / 2 / - / 56 / Vp / 4 / 56
IEMI-0153 / Quality management / DD / 2 / 2 / - / - / 56 / Ex / 4 / 56
TOTAL / 12 / 2 / 6 / 3 / 322 / 26 / 406
OPTIONAL DISCIPLINES
IEMI-0366 / Analysis and control of production systems through cost / SD / 2 / 2 / - / - / 56 / Vp / 4 / 56
IEMI-0688 / Performance management / SD / 2 / 2 / - / - / 56 / Vp / 4 / 56
TOTAL / 2 / 2 / - / - / 56 / 4 / 56
Code / Disciplines* / Type / Semester VI / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0156 / Marketing / DD / 2 / 2 / - / - / 56 / Vp / 4 / 56
IEMI-0409 / Finishing of textile products / DD / 2 / - / 2 / - / 56 / Vp / 4 / 56
IEMI-0504 / Technologies and equipments in knitting work / SD / 2 / - / 1 / 1 / 56 / Ex / 4 / 56
IEMI-0404 / Management information systems / SD / 2 / - / 2 / - / 56 / Ex / 4 / 56
IEMI-0472 / Manufacturing processes in the in the leather / SD / 2 / - / 1 / 2 / 70 / Ex / 5 / 70
IEMI-0354 / Economical legislation / DD / 2 / 2 / - / - / 56 / Vp / 4 / 56
IEMI-0425 / Practice / SD / - / - / - / - / 90 / Cv / 2
TOTAL / 12 / 4 / 6 / 3 / 440 / 27 / 350
OPTIONAL DISCIPLINES
IEMI-0244 / Labor Legislation / SD / 2 / 1 / - / - / 42 / Vp / 3 / 42
IEMI-0348 / Competition law / SD / 2 / 1 / - / - / 42 / Vp / 3 / 42
TOTAL / 2 / 1 / - / - / 42 / 3 / 42
Legend: C - Course; S - Seminar; L - Practical (laboratory); P - Project; IS - Individual Study;
GD - General Discipline; FD - Fundamental Discipline; SD - Specialized Discipline; CD - Complementary Discipline; FD - Field Discipline; DP - Practical Activities
Type of Examination - Verification Form, Ex. - examination; Cv. - Colloquium, Vp. - Continuous Assessment, Pr - Project; Credits - number of ECTS credits; IS - Individual study.
Head of departament ,
Lecturer Dr. Albu Adina-Victoria
RECTOR,
Professor Dr. Constantin BUNGĂU / DEAN,
Associate Professor Dr.
Gabriel Valentin BENDEA
UNIVERSITY OF ORADEA
FACULTY OF ENERGY ENGINEERING AND INDUSTRIAL MANAGEMENT
Licence's Degree Program: INDUSTRIAL ECONOMICAL ENGINEERING
Fundamental Field:
Undergraduate Field: ENGINEERING AND MANAGEMENT
Duration of studies / no. of credits: 4 years/240 credits
Type of education: Full-time learning (IF) / Valid from academic year
2014-2015
Beginning with 1st year of study
CURRICULUM **
Year of study IV
Code / Disciplines* / Type / Semester VII / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0029 / Strategic Management / DD / 2 / 2 / - / - / 56 / Vp / 4 / 56
IEMI-0233 / Ergonomics / DD / 2 / 2 / - / - / 56 / Vp / 4 / 56
IEMI-0583 / Accounting / DD / 2 / 1 / - / - / 42 / Ex / 4 / 70
IEMI-0028 / Financial Management / DD / 2 / 2 / - / - / 56 / Ex / 4 / 56
IEMI-0155 / Human Resources Management / DD / 2 / 2 / - / - / 56 / Ex / 4 / 56
TOTAL / 10 / 9 / - / - / 266 / 20 / 294
OPTIONAL DISCIPLINES
PACKAGE 1
IEMI-0619 / Computer Assisted Design in the field of knitting / SD / 2 / - / 3 / - / 70 / Ex / 5 / 70
IEMI-0730 / Computer aided manufacturing knitwear / SD / 2 / - / 3 / - / 70 / Ex / 5 / 70
PACKAGE 2
IEMI-0525 / Computer aided design in footwear / SD / 2 / - / 2 / - / 56 / Ex / 5 / 84
IEMI-0723 / Computer aided design of leather articles / SD / 2 / - / 2 / - / 56 / Ex / 5 / 84
TOTAL / 4 / - / 5 / - / 126 / 10 / 154
Code / Disciplines* / Type / Semester VIII / Total of hours / Type of Exami-nation / Cre-
dits / IS
[hours] / Condi-
tioning
C / S / L / P
MANDATORY DISCIPLINES
IEMI-0130 / Environmental management / DD / 2 / 2 / - / - / 56 / Ex / 4 / 56
IEMI-0602 / Production Management / DD / 2 / 2 / - / - / 56 / Ex / 4 / 56
IEMI-0503 / Technologies and equipments in clothing / SD / 2 / - / 1 / 1 / 56 / Ex / 4 / 56
IEMI-0427 / Practice for drafting diploma / SD / - / - / - / - / 84 / Vp / 10 / 196
TOTAL / 6 / 4 / 1 / 1 / 252 / 22 / 364
OPTIONAL DISCIPLINES
PACKAGE 1
IEMI-0694 / Financial Economic Analysis / DD / 2 / 2 / - / - / 56 / Vp / 3 / 28
IEMI-0690 / Communication and Negotiation in business / DD / 2 / 2 / - / - / 56 / Vp / 3 / 28
PACKAGE 2
IEMI-0731 / Computer aided design of clothing / SD / 2 / - / 3 / - / 70 / Ex / 5 / 70
IEMI-0689 / Computer Assisted Design in the field of the Ready- Made clothes / SD / 2 / - / 3 / - / 70 / Ex / 5 / 70
TOTAL / 4 / 2 / 3 / - / 126 / 8 / 98
Legend: C - Course; S - Seminar; L - Practical (laboratory); P - Project; IS - Individual Study;
GD - General Discipline; FD - Fundamental Discipline; SD - Specialized Discipline; CD - Complementary Discipline; FD - Field Discipline; DP - Practical Activities
Type of Examination - Verification Form, Ex. - examination; Cv. - Colloquium, Vp. - Continuous Assessment, Pr - Project; Credits - number of ECTS credits; IS - Individual study.
Head of departament ,
Lecturer Dr. Albu Adina-Victoria
RECTOR,
Professor Dr. Constantin BUNGĂU / DEAN,
Associate Professor Dr.
Gabriel Valentin BENDEA
I. REQUIREMENTSFOROBTAININGLICENSE DIPLOMA
Number ofcreditsallocatedunder the laws: 240
1)207creditsforobligatory disciplines(required)
2)33creditsforobligatory disciplines (optional)
3)14credits atpracticeincluded inthe number of creditsallocated tocompulsory subjectsfrompoint 1 andpoint 2.
4)10creditsallocated to diploma examination: 5 creditsfor the test"Checkingthe fundamental andspecialtyknowledge" and5 creditsfortest"Presentation and supportingdiploma project".
II. ACADEMICYEARSTRUCTURE(in numberofweeks)
Year / Educational activities / Exam session / Practice * / Holidaysem. I / sem. II / Winter / Winterfailed exams / Summer / Summer failed exams / Autumnfailed exams / Winter / Spring / Summer
I / 14 / 14 / 3 / 1 / 3 / 1 / 2 / - / 2 / 1 / 12
II / 14 / 14 / 3 / 1 / 3 / 1 / 2 / 3 / 2 / 1 / 9
III / 14 / 14 / 3 / 1 / 3 / 1 / 2 / 3 / 2 / 1 / 9
IV / 14 / 14 / 3 / 1 / 2 / 1 / 2 / - / 2 / 1 / -
* The practiceis based, onprepareddiscipline records elaborated by the Departmentand approved byFacultyCouncil.
Practicetakes placeboth infacultylaboratoriesand in thespecializedbusiness units, based on conventionsof practice.
III. NUMBER OF HOURSPER WEEKFOR OBLIGATORY DISCIPLINES(REQUIRED ANDOPTIONAL)
YEAR / 1ST SEMESTER / 2ND SEMESTERI / 26 / 25
II / 26 / 26 (90 – practice)
III / 27 / 28 (90 – practice)
IV / 28 / 27 (ofwhich 7practice)
Total number of hours=2898+264 (practice) =3162
Crt. no. / Discipline / Hours no. / Total / Standard ARACIS (min/max) %
YEAR I / YEAR II / YEAR III / YEAR IV / Hours / %
1 / Obligatoryrequired / 714 / 720 / 762 / 518 / 2714 / 85,83
2 / Obligatory optional / 0 / 98 / 98 / 252 / 448 / 14,17 / minimum 10 %
TOTAL / 714 / 818 / 860 / 770 / 3162 / 100,00
3 / Facultative / 154 / 168 / 0 / 0 / 322 / 10,18 / minimum 10 %
Crt. no. / Discipline / Hours no. / Total / Standard ARACIS (min/max) %
YEAR I / YEAR II / YEAR III / YEAR IV / Hours / %
1 / Fundamental / 560 / 42 / 0 / 0 / 602 / 19,04 / minimum 17 %
2 / In the field / 98 / 532 / 490 / 434 / 1554 / 49,15 / minimum 38 %
3 / Specialty / 0 / 188 / 370 / 336 / 894 / 28,27 / minimum 25%
4 / Complementary / 56 / 56 / 0 / 0 / 112 / 3,54 / maximum 8 %
TOTAL / 714 / 818 / 860 / 770 / 3162 / 100,00
IV. WEIGHTOF CATEGORIES FROMREQUIREDCOURSES(REQUIRED +OPTIONAL) + FACULTATIVE:
For license:
- Required obligatory disciplines: 85,83 %, number of hours: 2714;
- Optional obligatory disciplines: 14,17 %, number of hours448;
- Fundamental (basic) disciplines: 19,04 %, number of hours: 602;
- Disciplinesin the field: 49,15%, number of hours: 1554;
- Specialty disciplines: 28,27 %, number of hours: 894;
- Complementary disciplines: 3,54 %, number of hours: 112;
- Facultative disciplines: 10,18 %, number of hours: 322;
- Course report / applications: 1456 / 1706 = 0,85.
Totalhoursobligatory disciplines(required +optional): 3162hours
Total hours facultative disciplines: 322hours
V. FLEXIBILITY OFEDUCATION PROCESS
Flexibilityof program studies is provided byoptional and facultativedisciplines. Optional disciplinesare offeredforsemester3 ÷8 andare groupedinoptional disciplinesoroptional packages. From each setof optional subjects,studentschoose one thatbecomesmandatory.This activitytakes placebefore the startof the academic yearwhich includessemesterscontainingpackagesof optional subjectsordisciplines.
VI. DIPLOMAEXAM
1)Communicationtopicof the diploma project: Semester 6;
2)Elaborating the projectof diploma: 3x 28hours =84 hours, semester8,weeks12 to 14;
3)Supportingthe projectof diploma: July, September.
VII. ACREDIT POINTSREQUIRES A TOTAL OF28HOURS / SEMESTEROF DIDACTIC AND INDIVIDUAL ACTIVITY.
VIII. DISTRIBUTION OFCOMPETENCIESCREDITS(TABLES RNCIS-GRID1 *)
Study program: Industrial economical engineering
Nr. crt. / Discipline / Sem.1,...,8 / Number of
credits / Professional competences / Transversal competences
C1 / C2 / C3 / C4 / C5 / C6 / CT1 / CT2 / CT3
Linear algebra, analytical and differential geometry / 1 / 4 / 4 / - / - / - / - / - / - / - / -
Technical drawings and computer drawings / 1 / 5 / 2 / 2 / 1 / - / - / - / - / - / -
Chemistry / 1 / 5 / 5 / - / - / - / - / - / - / - / -
Mechanics and Material resistance / 1 / 5 / 3 / - / 2 / - / - / - / - / - / -
Basics of Informatics / 1 / 5 / 2 / - / 2 / - / - / - / - / - / 1
Computer programming and programming languages I / 1 / 5 / 2 / - / 1 / - / - / - / 1 / - / 1
Foreign language (English) I / 1 / 1 / - / - / - / - / - / - / - / - / 1
Sports I / 1 / 1 / - / - / - / - / - / - / - / - / 1
Industrial psychology / 1 / 2 / 1 / - / - / - / - / - / 0,5 / 0,5 / -
2nd Foreign language / 1 / 1 / - / - / - / - / - / - / - / - / 1
MathematicalAnalysis / 2 / 6 / 6 / - / - / - / - / - / - / - / -
Computer programming and programming languages II / 2 / 4 / 1 / - / 1 / - / - / - / 1 / - / 1
Computer Aided Graphics / 2 / 6 / 2 / 2 / 1 / - / - / - / - / - / 1
Mechanisms and Machinery Organs / 2 / 4 / 2 / 1 / 1 / - / - / - / - / - / -
Basics Economy / 2 / 5 / 2 / 1 / - / 0,5 / 0,5 / 0,25 / 0,25 / 0,25 / 0,25
Physics / 2 / 4 / 4 / - / - / - / - / - / - / - / -
Foreign language (English) II / 2 / 1 / - / - / - / - / - / - / - / - / 1
Sports II / 2 / 1 / - / - / - / - / - / - / - / - / 1
Artistic painting / 2 / 4 / 2 / - / - / - / - / - / - / - / 2
Philosophy / 2 / 4 / - / - / - / - / - / - / - / 2 / 2
Mathematical statistics / 3 / 4 / 4 / - / - / - / - / - / - / - / -
Basics of computer aided design / 3 / 5 / - / - / 3 / 1 / - / - / - / - / 1
Electrotechnics, electronics and automation / 3 / 5 / 3 / - / - / - / - / - / 2 / - / -
Textile fibers / 3 / 6 / 1 / 3 / 1 / 1
Fundamentals of Management / 4 / 5 / 1 / 1 / - / 1 / 1 / - / 1 / - / -
Foreign language (English) III / 3 / 1 / - / - / - / - / - / - / - / - / 1
Sports III / 3 / 1 / - / - / - / - / - / - / - / - / 1
Engineering of ProductionSystems / 5 / 4 / 1 / - / 1 / - / - / 1 / - / 1 / -
Schedulingandproduction control / 5 / 4 / 1 / - / 1 / - / - / 1 / - / 1 / -
Consumer behavior / 3 / 5 / 1 / 1 / 1 / - / - / - / 1 / 1 / -
Management of conflicts / 3 / 5 / 1 / 1 / - / - / - / 1 / 1 / 1 / -
Metrology in textile- leather / 4 / 4 / 0,75 / 1 / 0,5 / 1 / 0,5 / 0,25 / -
Textile structures-yarn / 4 / 4 / 1 / 1 / - / - / - / 1 / - / - / 1
Textile structures-knits / 4 / 4 / 1 / 1 / - / - / 1 / - / 0,5 / - / 0,5
Comfort and functions of leather and textile products / 4 / 5 / 2 / 1 / - / - / - / - / - / 1 / 1
Textile structures-fabrics / 4 / 6 / 1 / 1 / 1 / - / - / 3
Foreign language (English) IV / 4 / 1 / - / - / - / - / - / - / - / - / 1
Practice / 4 / 2 / 0,5 / 0,5 / 0,5 / 0,5 / - / - / - / - / -
Sports IV / 4 / 1 / - / - / - / - / - / - / - / - / 1
Company’sEconomy / 4 / 4 / 0,5 / 0,5 / - / 0,75 / 0,75 / 0,75 / 0,25 / 0,25 / 0,25
The economic environment / 4 / 4 / 0,5 / 0,5 / - / 0,75 / 0,75 / 0,75 / 0,25 / 0,25 / 0,25
Sociologyandpsychologyof work / 4 / 4 / - / - / - / - / - / - / 2 / 2 / -
Structure and design of knitwear / 5 / 5 / 1 / 1 / - / 1 / - / 0,5 / 0,5 / 0,5 / 0,5
Control and quality assurance / 5 / 3 / 1 / 1 / 1 / - / - / - / - / - / -
Structure and design of footwear and leather articles / 5 / 5 / 1 / 1 / 1 / - / - / 2 / - / - / -
Garments structure and design / 5 / 5 / 1 / 1 / 1 / 1 / - / - / - / - / 1
Raw materials for Leather Ready Made products / 5 / 4 / 1 / 1 / 1 / - / - / 1 / - / - / -
Quality management / 5 / 4 / 1 / 1 / - / 1 / - / 1 / - / - / -
Analysis and control of production systems through cost / 5 / 4 / 2 / - / - / - / - / - / - / 2 / -
Performance management / 5 / 4 / 2 / - / - / - / - / - / - / 2 / -
Marketing / 6 / 4 / 1 / 1 / - / - / - / 1 / 1 / - / -
Finishing of textile products / 6 / 4 / 1 / - / - / 1 / - / 1 / 0,5 / - / 0,5
Technologies and equipments in knitting work / 6 / 4 / - / - / - / - / 2 / - / - / 2 / -
Management information systems / 6 / 4 / 2 / - / 2 / - / - / - / - / - / -
Manufacturing processes in the leather / 6 / 5 / 0,5 / 0,5 / 0,5 / 1 / 0,5 / 0,5 / 0,5 / 0,5 / 0,5
Economical legislation / 6 / 4 / - / 2 / - / - / 1 / - / - / - / 1
Practice / 6 / 2 / 0,5 / 0,5 / 0,5 / 0,5 / - / - / - / - / -
Labor legislation / 6 / 3 / - / 1 / - / - / 1 / - / 1 / - / -
Competition law / 6 / 3 / - / 1 / - / - / 1 / - / 1 / - / -
Strategic Management / 7 / 4 / 1 / 1 / - / - / - / 1 / 1 / - / -
Ergonomics / 7 / 4 / - / - / - / 1 / 1 / 1 / - / 1 / -
Accounting / 7 / 4 / 1 / 2 / - / - / - / - / 1 / - / -
Financial Management / 7 / 4 / 1 / 1 / 1 / - / - / - / 1 / - / -
Human Resources Management / 7 / 4 / 1 / 1 / - / 1 / - / - / - / 1 / -
Computer Assisted Design in the field of the knitting / 7 / 5 / 1 / - / - / - / 2 / - / - / 2 / -
Computer aided manufacturing knitwear / 7 / 5 / 1 / 1 / - / 1 / - / - / - / 1 / 1
Computer aided design in footwear / 7 / 5 / 1 / 1 / 1 / - / - / 1 / 1 / - / -
Computer aided design of leather articles / 7 / 5 / 1 / 1 / 1 / - / - / 1 / 1 / - / -
Environmental management / 8 / 4 / - / 1 / 1 / - / - / - / 1 / 1 / -
Production Management / 8 / 4 / - / - / 1 / 1 / 1 / 1 / - / - / -
Technologies and equipments in clothing / 8 / 4 / 1 / 1 / 1 / 1 / - / - / - / - / -
Practice for drafting diploma / 8 / 10 / 1 / 1 / 2 / 2 / 2 / 2 / - / - / -
Financial Economic Analysis / 8 / 3 / 1 / 1 / 1 / - / - / - / - / - / -
Communicationand Negotiation in business / 8 / 3 / 1 / 1 / - / - / - / 1 / - / - / -
Computer aided design of clothing / 8 / 5 / 2 / - / 1 / - / - / - / - / 1 / 1
Computer Assisted Design in the field of the Ready- Made clothes / 8 / 5 / 1 / - / 1 / 1 / - / - / 1 / - / 1
Legend: C1 ÷ C6 – Professional competencies; CT1 ÷ CT3 – Transversal competences.
Head of departament ,Lecturer Dr. Albu Adina-Victoria
RECTOR,
Professor Dr. Constantin BUNGĂU / DEAN,
Associate Professor Dr.
Gabriel Valentin BENDEA
1ST SCHEDULE – “The description of the domain/study program through professional and transversal competences
Professional competencesLevel
descriptors
ofthe
structural elements of the professional competencies / C1. Carrying out of calculations, demonstrations and applications for specific tasks solving of engineering and management based on fundamental and engineering sciences knowledge. / C2. Elaboration and approaching of technical, economic and managerial documentation. / C3. Useof software andinformation technologytosolvingspecificengineering andmanagementtasks. / C4. Economic evaluation, planning and management of processes andlogistics and productionsystems. / C5. Resourcemanagementorganization, quality assurance production andmanagementorganizational development. / C6. Technical - economical designandindustrialproduct and processimprovement.