IMPORTANT

Stop !

Before assembling the Tesla Photon Machine,

Read me first!

  1. Read the User’s Guide cover to cover, then
  1. Assemble the Tesla Photon Machine
  1. If you have problems after reading the User’s Guide, please call TPM Support.

Please Note:

In order for the Warranty to be valid, the Warranty Card must be returned to RMS Products within ten (10) days after receipt of the product.


Table of Contents

Tesla Photon Model 2000 Description

Disclaimer

Specifications

User’s Notice

Assembly Instructions

Fully Assembled Model 2000

Recommended Seating Arrangement

Safety, Care & Maintenance

FAQ’s

Tesla Photon Model 2000 Limited Warranty

EXTENDED WARRANTY

1

Tesla Photon Model 2000 Description

The Tesla Photon Model 2000 is a device designed to generate high frequency, high voltage, light emitting frequency signatures. It produces heat, light and noise that harmlessly passes through human tissue. The device possesses qualities unlike any RF or EMF machine. It is capable of producing complex wave forms with accompanying harmonic fields of energy.

Disclaimer

This User’s Guide isNOT INTENDED TO ENCOURAGE THE USE OF THIS DEVICE IN ANY UNLICENSED OR UNAUTHORIZED MANNER.

Plasma Light Frequency Generators, such as the Tesla Photon Model 2000, are to be used for investigational purposes only. The manufacturer of this machine makes no claims whatsoever of the suitability of this machine for any particular purpose. rms products assumes no responsibility for the application, employment, effect, whether short term or long term, resulting from the use of this machine.

rms pRODUCTS , does not make any medical claims, nor do Tesla Photon Model 2000 representatives. Persons with medical problems are urged to consult a qualified health care practitioner.

Specifications

User’s Notice

DANGER - SHOCK HAZARD
Improper Contact May Cause Injury by Electrocution

PLEASE READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE THE DEVICE.

  1. Although all possible measures have been taken to ensure the accuracy of the information presented, RMS Products is not liable for damages or injuries, misinterpretation of directions, or the misapplications of information.
  1. Never stand on a conductive surface such as cement, wet ground, etc., when operating this equipment.
  2. Always provide adequate ventilation as discharge produces ozone in large amounts.
  3. Never leave the system unattended where children or other unqualified personnel may turn it on.
  4. This coil can produce up to 12 discharges.
  5. Do not use near Pace Makers or other similar devices. Always warn spectators as to the danger of being near this device is wearing or using sensitive equipment.
  1. Do not operate near computers or on the same power line.
  2. IMPORTANT. Both boxes are very fragile, so exercise extreme care when moving them.
  1. Make sure the Power Switch (Timer) is in the “Off” position before plugging in the machine.
  1. Connect the wire from the secondary coil to the Nobel Gas Crown (SECTION 3) before plugging in the machine.
  1. This equipment generates and radiates radio frequency energy. If the equipment does cause harmful interference to electronic equipment (i.e., radio, television or computer), the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the Tesla Photon Model 2000.
  • Increase the separation between the Tesla Photon Model 2000 and the electronic equipment.
  • Connect the machine into an outlet on a circuit that is different from the electronic equipment.
  1. For additional assistance, please contact the main office. Technical help is available on the 24 hour hotline message center (940-498-0120). Please leave a message indicating questions or problems you might be incurred. A technical advisor will return your call within 24 hours. Assistance is also available via e-mail (). When sending an e-mail, please indicate what questions or problems you might be having. Answers will be sent within 24 hours of your request.

Assembly Instructions

Fully Assembled Model 2000

Recommended Seating Arrangement

Safety, Care & Maintenance

WARNING:

TO REDUCE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE PRODUCT COVERS. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ANY AND ALL SERVICE PROBLEMS TO AUTHORIZED SERVICE PERSONNEL.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS MACHINE TO RAIN OR MOISTURE.

SAFETY TIPS:

  1. Read All Instructions Before Operating the Machine. The safety and operating instructions should be read before the product is operated.
  1. Follow Instructions. All operating and use instructions should be followed.
  1. Cleaning. Unplug the machine from the wall outlet before cleaning. Do not use liquid cleansers or aerosol cleansers. Use a lightly dampened cloth for cleaning.
  1. Water and Moisture. Do not use this product near water. For example, keep away from bathtubs, wash bowls, sinks, wet basements and swimming pools.
  1. Transporting the Product. When shipping or transporting the product, pack carefully in the original boxes.
  1. Ventilation. To prevent circulation of fresh air to the fans, the product should not be enclosed in a confined space while operating. Do not block the circulation vents of this machine. Overheating and equipment failure may result.

FAQ’s

Q: What is the Tesla Photon Model 2000?

A: The Tesla Photon Model 2000 is a light frequency generator driven by a tuned Tesla Coil that allows light therapy to penetrate within the body in the following ways for pain relief and pain management:

Increasing circulation and oxygen flow, while releasing toxins.

Stimulating acupuncture points throughout the body, releasing any blockages that may hinder the healing process, thereby facilitating realignment.

Maintaining balance in the bio-magnetic field around the body; making it less likely to sustain illness.

Q: What is the difference between the Tesla Photon Model 2000 and the Rife light emitting devices?

A. Rife technology has been proven to be very effective in the area of pain management and the healing arts. The Rife light tubes are generally composed of a mixture of argon and neon in a single gas tube. This is often combined with a frequency generator used to pulse the light frequencies. To help drive the frequencies into the body, the Tesla Photon Model 2000 utilizes 12 gases that covers a full spectrum of light frequencies which is driven by a Tuned Tesla Coil.

Q: How is the Tesla Photon Model 2000 used?

A: Place the Tesla Photon Model 2000 one to three feet from the subject. Subject may be either sitting (preferably in a wooden chair) or lying down. Subject can then simply relax while the machine is in operation. We recommend removing any metal jewelry (necklaces, watches, rings, etc…) and remove any metal objects from the area where usage is to occur. (See Figure 1)

Q: What is the recommended usage per day?

A: We recommend a maximum of 2 minutes sessions twice a day with a detox time of 6 to 8 hours between sessions.

Q: How long can the Tesla Photon Model 2000 be operated continuously?

A:This machine can be used numerous times daily but only at a maximum of 2 minute intervals, with a minimum of 10 minutes between sessions.

Q:Can you instantly feel the effects of the sessions?

A:Those who are extremely sensitive may feel the effects being generated from the machine. These people are the exception, not the rule. Results are best accomplished through multiple usage.

Q:What are the risks associated with the use of the Tesla Photon Model 2000?

A:There are no known risks or side effects associated with the use of the Tesla Photon Model 2000.

Q:Besides using the Tesla Photon Model 2000 what else would you recommend?

A:Drink water before and after each session. It is believed that control of the body chemistry is critical. It is important to implement a detoxification and basic nutritional program for your overall health.

Q:Is there a set number of sessions that fit all subjects?

A:No. You have to take into account that we are all different and therefore have different response rates. We have found that a minimum of 1-2 minutes twice daily, or a maximum of 3-4 minutes twice daily, is more than sufficient.

Q: Why do some of the tubes emit light, while the others don’t?

A:While some of the tubes do not emit light seen by the naked eye, they are producing frequencies beyond the visible light spectrum. Each excited atom type emits characteristic wavelengths determined by energy level differences present in that species.

Tesla Photon Model 2000 Limited Warranty

RMS Products warrants this product and all parts thereof, except as set forth below, ONLY TO THE ORIGINAL PURCHASER AT RETAIL, to be free from defects and workmanship from the date of the original purchase as shown below. (“The Warranty Period”)

PARTS: 1 yearLABOR: 90 days

If this machine is found to be defective, RMS Products will repair or replace defective parts at no charge to the original owner within one (1) year from date of purchases. Such repair and replacement services shall be rendered by RMS Products or the EXCLUSIVE AUTHORIZED REPRESENTATIVE, or it’s authorized repair service. If the customer has purchased an EXTENDED SERVICE AGREEMENT, all work will be performed as per the EXTENDED SERVICE AGREEMENT.

FOR WARRANTY SERVICE: Call or e-mail the Exclusive Representative for the closest authorized service. The original bill of sale or a copy of bill will be required to obtain service. Shipping and installation of the replacement Products or replacement parts shall be at Buyer's expense.

If service is not available locally, please carefully pack the unit in its original box and ship, insured, to

RMS Products, 237 Strait Lane, Hickory Creek, Texas 76210 USA.

Telephone: 940-498-0120e-mail:

A copy of the original bill of sale must be enclosed.

EXCLUSION FROM WARRANTY:

  1. Abuse, accident, alteration, modification, tampering, neglect, misuse, faulty installation, lack of reasonable care, or if repaired by or serviced by anyone not authorized by RMS Products.
  2. Altered Serial number, including tampering, defacing or removal.
  3. Glass tube breakage.
  4. Any damage that occurs during shipping, due to an act of God, or cosmetic damage.
  5. Failures due to power surges and/or lightning.
  6. Due to potential overuse, Nobel gas crown glass light tubes are excluded from warranty.
  7. There are no other express warranties except as listed above.

RMS Products SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL, OR CONSEQUENTIAL, RESULTING FROM THE USE OF THIS MACHINE, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

WARRANTY IS NOT TRANSFERRABLE.

FOR CUSTOMER RECORDS.

Model: ______Serial No.:______

Purchase Date: ______Dealer: ______

EXTENDED WARRANTY

Extended Warranty is available for a nominal fee of $500.00 and must be obtained within ten (10) days after original receipt and purchase. Notify RMS Products within this ten day period and submit payment to RMS Products. An extended warranty confirmation will be forwarded to Purchaser upon receipt of payment in full.

RMS Products warrants this product and all parts thereof, except as set forth below, ONLY TO THE ORIGINAL BUYER. This Extended Warranty covers the base and coil of the Tesla Photon Model 2000 ONLY. The Nobel Gas Crown is NOT INCLUDED under this warranty.

This Extended Warranty warrants that the Product sold hereunder will be free from defects in material and workmanship for an additional period of one (1) year from the date of expiration of original Limited Warranty. If the Product does not conform to this Extended Warranty during the extended warranty period (as herein above specified), Buyer shall notify RMS Products, in writing, of the claimed defects and demonstrate to RMS Products’ satisfaction that said defects are covered by this Extended Warranty. If the defects are properly reported to RMS Products within the warranty period, and the defects are of such type and nature as to be covered by this warranty, RMS Products shall, at its own expense, furnish replacement Products or, at RMS Product’s option, replacement parts for the defective Product. Shipping of the replacement Products or replacement parts shall be at Buyer's expense.

All Exclusions from Warranty as shown in original Limited Warranty apply to this Extended Warranty.

Such repair and/or replacement services shall be rendered by RMS Products, or the EXCLUSIVE AUTHORIZED REPRESENTATIVE, or it’s authorized repair service. If service is not available locally, please carefully pack the unit in its original box and ship, insured, to

RMS Products, 237 Strait Lane, Hickory Creek, Texas 76210 USA.

A copy of the original bill of sale must be enclosed.

1