Record of Learner Achievement

Unit: / Carpentry and Joinery Tools L2 CV3
Ofqual Unit Reference Number: / L/505/0743
Unit Review Date: / 28/02/2018
LEARNING OUTCOMES / ASSESSMENT CRITERIA / EVIDENCE LOCATION /
The learner will: / The learner can: /
1.  Be able to use manual woodworking tools / 1.1. Explain the use of manual tools used in carpentry
1.2. Identify the manual tools required for a given task
1.3. Use manual tools for a given task
2.  Be able to maintain manual and electrical tools / 2.1. Explain how to safely check the sharpness of manual tools
2.2. Check sharpness is suitable for tasks
2.3. Use wheel, oilstone and honing guide to sharpen chisels, plane blades and gouges
2.4. Explain how to check the wiring of electrical tools
2.5. Check wiring of electrical tools to ensure safe operation
3.  Be able to use electrical tools in woodwork / 3.1. Explain the use of electrical woodworking tools
3.2. Use electrical tools to:
a)  cut timber to given dimensions
b)  drill holes to given dimensions
c)  sand to a smooth finish
d)  insert screws to a given depth
e)  countersink screws
f)  counterbore large diameter holes
4.  Know how to store woodworking tools / 4.1. Demonstrate the correct method of storage for:
a)  electrical tools
b)  manual tools

Assessment Requirements

Learning Outcome 1

1.1 Manual tools: at least six to be identified.

Learning Outcome 3

3.1 Electrical woodworking tools: at least five to be covered.

Evidence Requirements

Evidence of practical ability must be demonstrated.

Final Tutor Feedback (Strengths and Areas for Improvement):

Learner Submission Disclaimer

I declare that this is an original piece of work and that all of the work is my own unless referenced.

Assessor Disclaimer

I confirm that this learner’s work fully meets all the assessment criteria listed above at the correct level and that any specified evidence requirements have been addressed.

Assessor / Learner / Date

1 | Page

V1 – January 2014