ASSEMBLY & INSTALLATION INSTRUCTIONS FOR
SWL-16P, SWL-23P, SWL-32P
(US Patent D730,562S)

CAUTION: READ ALL INSTRUCTIONS CAREFULLY FOR SAFE OPERATION AND INSTALLATION.

CAUTION

1.Turn off the main power at the circuit breaker before installing the fixturein order to prevent possible shock.

2.Fixture can be controlled with a standard linevoltage on/off toggle or paddle wall switch. Optionally, fixture can be dimmed if using a TRIACphasecontrol dimmer wall switch

3. This is fixture has a dimming driver Installed that will accept a 200V -240V AC input.

GENERAL

All electrical connections must be in accordance with local and national electrical code (N.E.C.) standards.

If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.

Remove the fixture and the mounting package from the box and make surethat no parts are missing by referencing the illustrations on the installation instruction sheet.

ASSEMBLY AND INSTALLATION

1. Take the fixture out of the box. You will see one 6” stem and three12” stems. (Fixture can be ordered

with additional 24’’ stems. Each fixture provides a 12’ wire length to accept up to 4 additional stem sections (8 feet) for a maximum stem length of 11’6’’).Selectthe suitable size of stems and connect them to the desired length you need to hang the fixture. Put the fixture wire through the stem and secure it to the threaded nipple on the ball.

2. Take the wiring barrier plate out of the ceiling plate by loosening two screws. (As shown in Fig.2)

  1. Pull the white and black supply wires and the house ground wire out from the outlet box.

Make the wiring connections: connect the white supply wire from outlet box to the AC IN WHITE WIRE;connect the black supply wire from outlet box to the AC IN BLACK WIRE.Connect the house ground wire to the ground wire.Carefully tuck all wires back into the outlet box. Locate the ceiling plate over the outlet box. Put the mounting screws through the slots on the ceiling plate. Then secure the mounting screws into the outlet box tightly. (As shown in Fig.3)

  1. To hang fixture, use the lifting rope as a support. Attach the loop on the lifting rope to the hook secured on the ceiling plate. Install the wiring barrier plate onto the ceiling plate by fastening 2 screws. (As shown in Fig.4)

5. Insert the fixture wire (RED “+”) into the quick connectors at the end of driver DC out wire (RED “+”); Insert the fixture wire (BLACK “–”) into the quick connectors at the end of driver DC out wire(BLACK “–”). (As shown in Fig.5)

6. Check all the wires after they are connected. Then install the pendant fixture onto the ceiling plate. Secure the decorative box to canopyby using 3 thumbscrews. (As shown in Fig.6)

BLACKJACK LIGHTING1553 Barclay Blvd Buffalo Grove, IL 60089 blackjacklighting.com Tel: 847-941-0588

BJL 150601