1

Articulatory Synthesis Exercise

Your assignment is to use the articulatory synthesizer to create four vowel sounds: /i/, /ɑ/, /u/and/ɚ/. Of these, /ɚ/may be the most difficult. An install file and instructions for controlling the synthesizer are on my SPPA 2040 web page (see the link called ‘Help in getting started’). The yellow squares control different aspects of the vocal tract model. The main controls that you’ll be fiddling with are: (1) the yellow square in the center of the tongue, (2) the bottom-right square that controls jaw height, and (3) the square in the upper right that controls lip posture. As you make adjustments to the vocal tract model, hit the “play part” button to listen, but also pay attention to the formant frequencies (mainly F1 & F2, except for /ɚ/); for example, to get a decent sounding /i/, F1 needs to be low (~300 Hz or so, maybe a little lower) and F2 needs to be high (~2300 Hz or so), while for /u/ both F1 and F2 need to be low (F1 ~300 and F2 ~900). The key for /ɚ/ is to find adjustments that will cause F3 to drop below ~2000 Hz or so. This may take some fiddling, but keep in mind as you’re doing this exercise that this is a pretty good analog of what kids are going through as they learn to speak, except that they have only their ears to guide them.

A table showing expected formant patterns for 10 vowels spoken by men is given below. For all cases except schwar (/ɚ/) you can attend mainly to F1 and F2 . You can use the information in this table or not. It’s up to you. Either way, you want to start with your knowledge of vowel articulation(e.g., is the vowel high, mid, or low, is it front, back or central, are the lips rounded, retracted, or somewhere in the middle?). And no matter how you do it you will have to use your ear to tell you whether or not you got the vowel quality that you were shooting for. If you do use the formant values in the table, use them as a general guide. It is not necessary to hit the exact values. If the vowel sounds right it is right – and vice versa.

When you’re satisfied that the vowel quality sounds right:

  1. Go to the File menu and choose “Save vocal tract parameters”. There are other choices under the File menu, sobe sure you pick “Save vocal tract parameters”.

LRC users: Save your files to a flash drive; e.g., ‘e:\HillenbrandJamesiy.vtp’ (or f: or whatever the drive letter is for the flash drive.

  1. For a file name, use this format: ‘LastnameFirstnameVowelCode.vtp’. My filenames for the four vowels would be:

HillenbrandJamesiy.vtp/i/ (“heed”)

HillenbrandJamesah.vtp/ɑ/ (“hot”)

HillenbrandJamesuw.vtp/u/ (“who’d”)

HillenbrandJameser.vtp/ɚ/ (“heard”)

3. After saving your file, go on to the next vowel.

When you’ve finished all four vowels, email your files as attachments to the graduate assistant for the course (see the syllabus for this email address).Please use the subject line: “Synthesis Exercise”.

______

______

Average formant frequency values for men (from G. Peterson & H. Barney, Control methods used a study of the vowels. Journal of the Acoustical Society of America, 1952).

______

F1 F2 F3

/i/270 2298 2955 (“heed”)

/ɪ/396 2012 2593 (“hid”)

/ɛ/530 1860 2489 (“head”)

/æ/667 1732 2438 (“had”)

/ɑ/721 1095 2465 (“hot”)

/ɔ/573 8452445 (“hawed”)

/ʊ/44110362287 (“hood”)

/u/ 302 879 2258 (“who’d”)

/ʌ/ 63411912386 (“hud”)

/ɚ/ 49113621740 (“heard”)

______

______