CP Computer Science Lego-Lab Assignments
Lego Lab 02 / Configuring the Display and Wait Blocks
DO, RE, MI…
80 & 100 Point Versions
Lab 02 Objectives
Introduce the NXT programming language
Write a simple NXT program with Display and Wait blocks.
Download and run the program
# / Actions
01a / Getting Started
Load the Lego NXT Software by double clicking the icon on your desktop (Firgure 01) is you have it.
You can also access this by clicking [Start] – [All Programs].
The software may take a little while to load and you may see the loading display from Figure 02.
Figure 01

Figure 02

01b / Getting Started
When the software loads, enter LegoLab02 under Start New Program and click GO > as shown in Figure 03.
Figure 03

02a / 70 Point Version
1. Your program block must display these 8 lines of output:

DO
TI
LA
SO
FA
MI
RE
DO
2. All 8 words must be visible on the left side of the screen, SIMULTANIOUSLY, for 5 seconds.
02b / 80 Point Version
1. Your program block must display these 8 lines of output:

DO
TI
LA
SO
FA
MI
RE
DO
2. All 8 words must be visible on the CENTER of the screen, SIMULTANIOUSLY, for 5 seconds.
02c / 90 Point Version
1. Your program block must display these 8 lines of output:

DO
TI
LA
SO
FA
MI
RE
DO
2. This may look like the same centered display of the 80 point version, but there is a major difference.
In the 80 point version, all of the words show up at once. In the 90 point version, the words show up
one at a time starting with the bottom DO and working its way up to the top DO. There should be a
one second pause between each word.
02d / 100 Point Version
1. Your program block must display these 8 lines of output:

DO
TI
LA
SO
FA
MI
RE
DO
2. The 100 point version has major changes. Like the 90 point the words are still displayed one at a time going
up; however, as each word is displayed, the previous word must be cleared. On the way up only one word
should be visible at a time. After you get to the top DO the words needs to be displayed in reverse order going
down. This time the output will not be clear. When finished, the output will show all 8 words for 5 seconds.

Lego Mindstorms 2010, PreAPCS Edition Lego Lab 02 Page 3 05-26-10