Aluminum Framed Glass Doors

SECTION 08 32 13

ALUMINUM FRAMED GLASS DOORS

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** Renin; door systems and hardware.
This section is based on the products of Renin, which is located at:
110 Walker Dr.
Brampton, ON, Canada L6T 4H6
Tel: 905-791-7930
Fax: 905-791-3813
Email:request info ()
Web:
[Click Here] for additional information.
Renin is an innovative manufacturer of door systems and hardware for door manufacturers and door fabricators. Renin also manufactures and distributes sliding bypass and bifold closet doors, room dividers, fabricated glass and decorative mirrors to the residential and commercial construction and remodeling markets.
In the 1960s, Renin invented the sliding mirror closet door and that innovation legacy endures with the supply of well-designed and long-lasting products to customers world-wide.
The name Renin is the combination of words that describes the mindset and culture of the company to renew and innovate.

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 Extruded aluminum swing doors.

1.1.2 Extruded aluminum bypass room divider doors.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

1.2.1 Section 06 10 00 - Rough Carpentry.

1.2.2 Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

1.3.1 ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:

1.4.2.1 Preparation instructions and recommendations.

1.4.2.2 Storage and handling requirements and recommendations.

1.4.2.3 Installation methods.

1.4.3 Shop Drawings:

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

1.4.4 Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

1.4.5 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Minimum 5 year experience manufacturing similar products.

1.5.2 Installer Qualifications: Minimum 2 year experience installing similar products.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.5.3 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.

1.5.3.1 Finish areas designated by Architect.

1.5.3.2 Do not proceed with remaining work until workmanship is approved by Architect.

1.5.3.3 Refinish mock-up area as required to produce acceptable work.

1.6 PRE-INSTALLATION MEETINGS

1.6.1 Convene minimum two weeks prior to starting work of this section.

1.7 DELIVERY, STORAGE, AND HANDLING

1.7.1 Deliver and store products in manufacturer's unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

1.7.2 Handling: Handle materials to avoid damage.

1.8 PROJECT CONDITIONS

1.8.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.9 SEQUENCING

1.9.1 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Renin, which is located at: 110 Walker Dr.; Brampton, ON, Canada L6T 4H6; Tel: 905-791-7930; Fax: 905-791-3813; Email:request info (); Web:

2.1.2 Web:

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.3 Substitutions: Not permitted.

2.1.4 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete if not required.

2.2 EXTRUDED ALUMINUM SWING DOORS

2.2.1 Model 7300 as manufactured by Renin Canada Corp.

2.2.1.1 Design: Hinged door; 1 inch x 1-1/4 inches (25 mm x 32 mm) extruded aluminum door frame; Single 180 degree swing. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Includes all hinges, pull and latch. Factory finished, ready-to-install. Exact fit required, not adjustable.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.2.1.2 Aluminum Finish: Satin anodized.

2.2.1.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Delete size not required. Custom sizes made to order.

2.2.1.4 Size: 12 inches x 80 1/2 inches (305 mm x 2045 mm).

2.2.1.5 Size: 18 inches x 80 1/2 inches (457 mm x 2045 mm).

2.2.1.6 Size: 24 inches x 80 1/2 inches (610 mm x 2045 mm).

2.2.1.7 Size: 30 inches x 80 1/2 inches (762 mm x 2045 mm).

2.2.1.8 Size: 36 inches x 80 1/2 inches (914 mm x 2045 mm).

2.2.1.9 Size: 12 inches x 96 inches (305 mm x 2286 mm).

2.2.1.10 Size: 18 inches x 96 inches (457 mm x 2286 mm).

2.2.1.11 Size: 24 inches x 96 inches (610 mm x 2286 mm).

2.2.1.12 Size: 30 inches x 96 inches (762 mm x 2286 mm).

2.2.1.13 Size: 36 inches x 96 inches (914 mm x 2286 mm).

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.2.1.14 Insert Panel: Single-sided 3 mm mirror glass.

2.2.1.15 Insert Panel: Double-sided 3 mm mirror glass.

2.2.1.16 Insert Panel: Back-painted glass.

2.2.1.17 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.2.1.18 Glass: Clear Mirror (Safety-backed 3 mm).

2.2.1.19 Glass: Smoked Mirror (Safety-backed 3 mm).

2.2.1.20 Glass: Bronze Mirror (Safety-backed 3 mm).

2.2.1.21 Glass: White Back Painted (Safety-backed 3 mm).

2.2.1.22 Glass: Black Back Painted (Safety-backed 3 mm).

2.2.1.23 Glass: Red Back Painted (Safety-backed 3 mm).

2.2.1.24 Glass: Clear laminated Glass (6 mm).

2.2.1.25 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete flush panel not required.

2.2.1.26 Flush Panel: White 1/8 inch (3 mm).

2.2.1.27 Flush Panel: Almond 1/8 inch (3 mm).

2.2.1.28 Flush Panel: Oak 1/8 inch (3 mm).

2.2.1.29 Flush Panel: Flush Panel: Whitewood 1/8 inch (3 mm).

2.2.1.30 Flush Panel: Laminated Oak 1/8 inch (3 mm).

2.2.1.31 Flush Panel: Laminated Mahogany 1/8 inch (3 mm).

2.2.1.32 Flush Panel: Angel White 1/2 inch (12 mm).

2.2.1.33 Flush Panel: Country Pine 1/2 inch (12 mm).

2.2.1.34 Flush Panel: Traditional Oak 1/2 inch (12 mm).

2.2.1.35 Flush Panel: Misty Grey 1/2 inch (12 mm).

2.2.1.36 Flush Panel: Formal Black 1/2 inch (12 mm).

2.2.1.37 Flush Panel: Imperial Oyster 1/2 inch (12 mm).

2.2.1.38 Flush Panel: Victorian Cherry 1/2 inch (12 mm).

2.2.1.39 Flush Panel: Laminated Oak 1/2 inch (12 mm).

2.2.1.40 Flush Panel: Laminated Mahogany 1/2 inch (12 mm).

** NOTE TO SPECIFIER ** Delete if not required.

2.3 EXTRUDED ALUMINUM BYPASS ROOM DIVIDER DOORS

** NOTE TO SPECIFIER ** Delete if not required.

2.3.1 Model 7039 as manufactured by Renin Canada Corp.

2.3.1.1 Design: Bypass ceiling-mounted 2 inches room divider door system - 3 panel; 2 inches x 1-3/8 inches (51 mm x 35 mm) extruded aluminum door frame; bottom roll system with top track. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Factory finished, ready-to-install. ADA compliant.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.3.1.2 Aluminum Finish: Satin anodized.

2.3.1.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.3.1.4 Insert Panel: Single-sided 3 mm mirror glass.

2.3.1.5 Insert Panel: Double-sided 3 mm mirror glass.

2.3.1.6 Insert Panel: Back-painted glass.

2.3.1.7 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.3.1.8 Glass: Clear Mirror (Safety-backed 3mm).

2.3.1.9 Glass: Smoked Mirror (Safety-backed 3mm).

2.3.1.10 Glass: Bronze Mirror (Safety-backed 3mm).

2.3.1.11 Glass: White Back Painted (Safety-backed 3mm).

2.3.1.12 Glass: Black Back Painted (Safety-backed 3mm).

2.3.1.13 Glass: Red Back Painted (Safety-backed 3mm).

2.3.1.14 Glass: Clear laminated Glass (6 mm).

2.3.1.15 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete if not required.

2.3.2 Model 7035 as manufactured by Renin Canada Corp.

2.3.2.1 Design: Bypass ceiling-mounted 2 inches room divider door system (3 panel); 2 inches x 1-3/8 inches (51 mm x 35 mm) extruded aluminum door frame; top roll system with top track. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Factory finished, ready-to-install. ADA compliant.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.3.2.2 Aluminum Finish: Satin anodized.

2.3.2.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.3.2.4 Insert Panel: Single-sided 3 mm mirror glass.

2.3.2.5 Insert Panel: Double-sided 3 mm mirror glass.

2.3.2.6 Insert Panel: Back-painted glass.

2.3.2.7 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.3.2.8 Glass: Clear Mirror (Safety-backed 3mm).

2.3.2.9 Glass: Smoked Mirror (Safety-backed 3mm).

2.3.2.10 Glass: Bronze Mirror (Safety-backed 3mm).

2.3.2.11 Glass: White Back Painted (Safety-backed 3mm).

2.3.2.12 Glass: Black Back Painted (Safety-backed 3mm).

2.3.2.13 Glass: Red Back Painted (Safety-backed 3mm).

2.3.2.14 Glass: Clear laminated Glass (6 mm).

2.3.2.15 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete if not required.

2.3.3 Model 7053 as manufactured by Renin Canada Corp.

2.3.3.1 Design: Bypass ceiling-mounted 3 inches room divider door system (4 panel); 3 inches x 1-3/8 inches 76 mm x 35 mm) extruded aluminum door frames; bottom roll system with top track. ADA compliant. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Factory finished, ready-to-install.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.3.3.2 Aluminum Finish: Satin anodized.

2.3.3.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.3.3.4 Insert Panel: Single-sided 3 mm mirror glass.

2.3.3.5 Insert Panel: Double-sided 3 mm mirror glass.

2.3.3.6 Insert Panel: Back-painted glass.

2.3.3.7 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.3.3.8 Glass: Clear Mirror (Safety-backed 3mm).

2.3.3.9 Glass: Smoked Mirror (Safety-backed 3mm).

2.3.3.10 Glass: Bronze Mirror (Safety-backed 3mm).

2.3.3.11 Glass: White Back Painted (Safety-backed 3mm).

2.3.3.12 Glass: Black Back Painted (Safety-backed 3mm).

2.3.3.13 Glass: Red Back Painted (Safety-backed 3mm).

2.3.3.14 Glass: Clear laminated Glass (6 mm).

2.3.3.15 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete if not required.

2.3.4 Model 7017 as manufactured by Renin Canada Corp.

2.3.4.1 Design: Bypass ceiling-mounted 1.5 inches room divider door system (3 panel); extruded aluminum door frame; bottom roll system with built in anti-jump feature. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Factory finished, ready-to-install. Non-ADA compliant.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.3.4.2 Aluminum Finish: Satin anodized.

2.3.4.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Option - can be purchased pre-installed as added option (P/N BP118). Delete if not required.

2.3.4.4 Closing: Soft-close mechanism.

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.3.4.5 Insert Panel: Single-sided 3 mm mirror glass.

2.3.4.6 Insert Panel: Double-sided 3 mm mirror glass.

2.3.4.7 Insert Panel: Back-painted glass.

2.3.4.8 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.3.4.9 Glass: Clear Mirror (Safety-backed 3mm).

2.3.4.10 Glass: Smoked Mirror (Safety-backed 3mm).

2.3.4.11 Glass: Bronze Mirror (Safety-backed 3mm).

2.3.4.12 Glass: White Back Painted (Safety-backed 3mm).

2.3.4.13 Glass: Black Back Painted (Safety-backed 3mm).

2.3.4.14 Glass: Red Back Painted (Safety-backed 3mm).

2.3.4.15 Glass: Clear laminated Glass (6 mm).

2.3.4.16 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete if not required.

2.3.5 Model 7017 as manufactured by Renin Canada Corp.

2.3.5.1 Design: Bypass closet door system (2 panel); wide stile extruded aluminum door frame; bottom roll system with built in anti-jump feature. ADA compliant. Safety Backing - Conforms to CGSB 12.5-M86 Type 3C (Canada) and ANSI Z97.1-1984 (US). Factory finished, ready-to-install.

** NOTE TO SPECIFIER ** Delete extruded aluminum finish not required.

2.3.5.2 Aluminum Finish: Satin anodized.

2.3.5.3 Aluminum Finish: Bronze anodized.

** NOTE TO SPECIFIER ** Option - can be purchased pre-installed as added option (P/N BP118). Delete if not required.

2.3.5.4 Closing: Soft-close mechanism.

** NOTE TO SPECIFIER ** Delete insert panel not required.

2.3.5.5 Insert Panel: Single-sided 3 mm mirror glass.

2.3.5.6 Insert Panel: Double-sided 3 mm mirror glass.

2.3.5.7 Insert Panel: Back-painted glass.

2.3.5.8 Insert Panel: Single 6 mm laminated glass inserts.

** NOTE TO SPECIFIER ** Delete glass not required.

2.3.5.9 Glass: Clear Mirror (Safety-backed 3mm).

2.3.5.10 Glass: Smoked Mirror (Safety-backed 3mm).

2.3.5.11 Glass: Bronze Mirror (Safety-backed 3mm).

2.3.5.12 Glass: White Back Painted (Safety-backed 3mm).

2.3.5.13 Glass: Black Back Painted (Safety-backed 3mm).

2.3.5.14 Glass: Red Back Painted (Safety-backed 3mm).

2.3.5.15 Glass: Clear laminated Glass (6 mm).

2.3.5.16 Glass: Translucent White Laminated Glass (6 mm).

** NOTE TO SPECIFIER ** Delete flush panel not required.

2.3.5.17 Flush Panel: White 1/8 inch (3mm).

2.3.5.18 Flush Panel: Almond 1/8 inch (3mm).

2.3.5.19 Flush Panel: Oak 1/8 inch (3mm).

2.3.5.20 Flush Panel: Flush Panel: Whitewood 1/8 inch (3mm).

2.3.5.21 Flush Panel: Laminated Oak 1/8 inch (3mm).

2.3.5.22 Flush Panel: Laminated Mahogany 1/8 inch (3mm).

2.3.5.23 Flush Panel: Angel White 1/2 inch (12mm).

2.3.5.24 Flush Panel: Country Pine 1/2 inch (12mm).

2.3.5.25 Flush Panel: Traditional Oak 1/2 inch (12mm).

2.3.5.26 Flush Panel: Misty Grey 1/2 inch (12mm).

2.3.5.27 Flush Panel: Formal Black 1/2 inch (12mm).

2.3.5.28 Flush Panel: Imperial Oyster 1/2 inch (12mm).

2.3.5.29 Flush Panel: Victorian Cherry 1/2 inch (12mm).

2.3.5.30 Flush Panel: Laminated Oak 1/2 inch (12mm).

2.3.5.31 Flush Panel: Laminated Mahogany 1/2 inch (12mm).

** NOTE TO SPECIFIER ** Available door sizes by door panel number. Refer to model design for number of panels.

2.3.6 Sliding Door Size and Number of Panels:

** NOTE TO SPECIFIER ** Delete size not required. Custom sizes made to order.

2.3.6.1 Size: 47 inches/48 inches x 80 1/2 inches (1194/1219 mm x 2045 mm): Panel - 2.

2.3.6.2 Size: 47 inches/48 inches x 96 inches (1194/1219 mm x 2286 mm): Panel - 2.

2.3.6.3 Size: 59 inches/60 inches x 80 1/2 inches (1497/1524 mm x 2045 mm): Panel - 2.

2.3.6.4 Size: 59 inches/60 inches x 96 inches (1497/1524 mm x 2286 mm): Panel - 2.

2.3.6.5 Size: 71 inches/72 inches x 80 1/2 inches (1803/1829 mm x 2045 mm): Panel - 2.

2.3.6.6 Size: 71 inches/72 inches x 96 inches (1803/1829 mm x 2286 mm): Panel - 2.

2.3.6.7 Size: 83 inches/84 inches x 80 1/2 inches (2108/2134 mm x 2045 mm): Panel - 2.

2.3.6.8 Size: 83 inches/84 inches x 96 inches (2108/2134 mm x 2286 mm): Panel - 2.

2.3.6.9 Size: 95 inches/96 inches x 80 1/2 inches (2413/2438 mm x 2045 mm): Panel - 2.

2.3.6.10 Size: 95 inches/96 inches x 96 inches (2413/2438 mm x 2286 mm): Panel - 2.

2.3.6.11 Size: 108 inches x 80 1/2 inches (2743 mm x 2045 mm): Panel - 3.

2.3.6.12 Size: 108 inches x 96 inches (2743 mm x 2286 mm): Panel - 3.

2.3.6.13 Size: 120 inches x 80 1/2 inches (3048 mm x 2045 mm): Panel - 3.

2.3.6.14 Size: 120 inches x 96 inches (3048 mm x 2286 mm): Panel - 3.

2.3.6.15 Size: 144 inches x 80 1/2 inches (3658 mm x 2045 mm): Panel - 3.

2.3.6.16 Size: 144 inches x 96 inches (3658 mm x 2286 mm): Panel - 3.

2.3.6.17 Size: 192 inches x 80 1/2 inches (4877 mm x 2045 mm): Panel - 4.

2.3.6.18 Size: 192 inches x 96 inches (4877 mm x 2286 mm): Panel - 4.

3 EXECUTION

3.1 EXAMINATION

3.1.1 Do not begin installation until substrates have been properly prepared.

3.1.2 If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

3.2.1 Clean surfaces thoroughly prior to installation.

3.2.2 Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.3.1 Install in accordance with manufacturer's instructions and in proper relationship with adjacent construction.

3.4 PROTECTION

3.4.1 Protect installed products until completion of project.

3.4.2 Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

08 32 13-1