AEM Releases Plug & Play Infinity ECU for
2002-’05 MKIV Volkswagen Golf/Jetta 1.8T!
Unit replaces the factory ECU, fits in factory ECU location, and installs in about 30 minutes
Hawthorne, CA—AEM has released its Infinity-6 (30-7106) and -8h (PN 30-7108) ECUs and Plug & Play Adapter Harness (PN 30-3903) for 2002-’05 Volkswagen Golf/Jetta 1.8T racecars. When combined with AEM’s Plug & Play Adapter Harness, the Infinity completely replaces the factory VW 1.8T ECU and can be installed in about 30 minutes when using the factory sensors (MAP sensor required and sold separately). A base map for the engine is included.
Speed Density Fueling Control
The Infinity ECU does not support the factory Mass Airflow sensor. AEM offers a MAP sensor adapter harness (PN 30-3903-00) for seamless integration that provides speed density fueling control and allows users to eliminate the factory Mass Airflow sensor (MAF).
Uses Factory Wideband UEGO Air/Fuel Sensors & Boost Control Solenoid
The Infinity 1.8T Plug & Play Adapter Harness is designed to accept the factory wideband UEGO sensor, eliminating the need to add a wideband sensor to the car. The factory N75 boost control valve is supported, and the Infinity can control aftermarket boost control solenoids if added.
Full Drive-by-Wire Control
The Infinity programmable ECU for the VW 1.8T supports the factory Drive-by-Wire throttle body and can easily accommodate larger DBW throttle bodies using the DBW Set Up Wizard in InfinityTuner software.
CAN Integration
The Infinity standalone ECU features CAN integration on the MKIV 1.8T and retains dashboard functionality. Users can also view and log wheel speed and steering angle through the CAN datastream.
Traction Control
Traction control is fully tunable using the CAN based factory wheel speed sensors.
Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness for the MKIV Golf/Jetta (PN 30-3903) includes an AEMnet port for communication with other AEMnet enabled devices.
An expansion port with a weatherproof 12-pin connector is included in the Plug & Play Adapter Harness for adding common aftermarket sensors including fuel pressure and ethanol content. The expansion port also includes a sensor ground, 5v reference, power from relay and switched inputs for boost target, no-lift shift, etc.
Infinity-6/8h ECU Features:
· Airflow model based (VE) tuning
· ECU Set Up Wizard simplifies start up
· Flex fuel compatible
· Programmable drive by wire
· Multiple programmable boost control strategies
· Programmable nitrous control
· On-the-fly map switching
· Single internal Lambda controller
· Dual knock sensing circuits
· Data logging up to 64GB, logging rate up to 1KHz/channel
· Outputs to 3rd party dashes and data loggers
· Industry leading data transfer speed (up to 480Mb/sec)
· Integrated engine protection strategies
· Sealed enclosure and IP67 rated comms ports
The Infinity ECU makes state-of-the-art ECU technology affordable for both professional teams and amateur racers. Built around a latest-generation 32 bit floating point 200MHz automotive processor and Real Time Operating System (RTOS), the Infinity is capable of processing 400 MIPS (millions of instructions per second). To our knowledge, the Infinity ECU currently has the fastest processing speed of any aftermarket Motorsports ECU available. This processing speed combined with a RTOS provides more accurate ignition timing for increased power, more responsiveness to truly custom tailor the driving experience to the driver, allows the Infinity to perform more computational features without a sacrifice in processing performance, and enables tuning of features and sub strategies without affecting other features and sub strategies. It allows you to do more, faster, in a more stable programming environment.
Please visit www.aemelectronics.com for more information and to find or become a Factory Trained Infinity EMS Tuner, or call us at (310) 484-2322.
THIS product may be used solely on vehicles used in sanctioned competition which may never be used upon a Public road or highway, unless permitted by specific regulatory exemption (visit the “Emissions” page at http://www.semasan.com/emissions for state by state details. Installers/Users located outside the united states should act in accordance with their local laws and regulations.
It is the responsibility of the installer and/or user of THIS product to ensure that IT IS used in compliance with all applicable laws and regulations, and this product must not be purchased if the intent is to use it in an unlawful manner.
About AEM
Advanced Engine Management’s performance electronics are Engineered to Outperform. The company designs, manufactures and assembles engine management systems, wideband air/fuel systems, water/methanol injection systems, performance gauges, boost controllers, ignition components, fuel delivery components and adjustable cam gears at its corporate headquarters in Hawthorne, CA.
###
Media Contact:
Lawson Mollica
Director of Marketing & PR
(310) 484-2322, 254