AIM 2302 – PRACTICE EXAM III

Chapter 7: Pricing and Product Planning

1. Short-term pricing decisions depend on all of the following, EXCEPT:
a. / Whether surplus capacity is available for the additional production.
b. / Whether the available capacity limits production.
c. / The time period of the contract over which capacity is committed.
d. / The level of product-sustaining activities and costs.
2. A small firm on the fringe of an industry is probably
a. / A price setter
b. / A price taker
c. / Both a price taker and a price setter
d. / A price maker
3. Ram Company produces two products, AR4 and AR8. AR4 has a contribution per unit of $3.00 and requires 0.3 machine hours per unit, whereas AR8 has a contribution of $2.50 per unit and requires 0.2 machine hours per unit. The company’s policy is to sell only products with a contribution per machine, the constrained or scare resource, greater than $9.90. What should they do?
a. / Sell both AR4 and AR8.
b. / Sell only AR4.
c. / Sell only AR8.
d. / Sell neither AR4 nor AR8.
4. An opportunity cost is
a. / Completely intangible and not measurable.
b. / The sacrificed potential benefit of choosing one alternative over another.
c. / The sacrificed past benefit of choosing one alternative over another.
d. / Not relevant to any decision.
5. Lido Company manufactures product MY40. Currently, the product sells for $55, with total costs to manufacture of $30. In order to add a new feature to the product, additional direct materials of $3.00, direct labor of $2.50, and batch-related costs of $1.45 per unit would have to be incurred. What are the incremental costs per unit of the decision to add the new feature?
a. / $3.00
b. / $2.50
c. / $6.95
d. / $5.50
6. Full-cost pricing is LEAST likely to be economically justified under which of the following?
a. / When customized products are produced.
b. / When contracts are developed with government agencies.
c. / When a firm enters into a long-term contractual relationship with a customer to supply a product.
d. / When a firm enters into a short-term contractual relationship with a customer to supply a product.
7. Demand is elastic when
a. / A small increase in price results in a small decrease in demand.
b. / Price increases cause demand to fluctuate wildly.
c. / A small increase in price results in a large decrease in demand
d. / Price increases cause demand to increase.
8. For long-term product mix decisions, comparison of the price of a product with its ______costs provides a valuable evaluation of its long-term profitability.
a. / Variable
b. / Opportunity
c. / Incremental
d. / Full

9.Plasticraft Company produces and sells a single product called a DROID. Plasticraft has excess capacity to manufacture 5,000 additional DROIDS. Variable costs are $35 per unit, and fixed costs total $300,000 per month. Ajax Company has offered to pay Plasticraft $39 per unit for a one-time special order for 4,000 DROIDS. This special order requires some additional selling expenses of $1.50 per unit. Should Plasticraft accept this special order?

10.Peanuts Company produces porcelain figurines of Lucy and Linus. The selling prices and variable costs for each figurine are as follows:

Linus / Lucy
Selling price / $25.00 / $20.00
Variable costs
Direct materials / $9.00 / $6.00
Direct labor / 5.00 / 2.00
Indirect manufacturing / 4.00 / 2.00

The cost of direct labor is $10.00 per hour and only 500 hours of labor time are available each week.

a.)Determine the contribution margin per direct labor hour for each product.

b.)Which product should Peanuts’ sales force promote?

11. Charlie’s Chairs manufactures 2 models of chairs, Standard and Premium. Weekly demand is estimated to be 120 units of the Standard Model and 70 units of the Premium Model. Only 420 machine hours are available per week. The following per unit data apply:

Standard

/ Premium
Contribution margin per unit / $12 / $15
Number of machine hours / 2 / 3

a.)For each model, compute contribution margin per machine hour.

b.)To maximize weekly production profits, how many units would you recommend of each model?

c.)If there are 500 machine hours available per week (instead of only 420 MH), how many chairs of each model should Charlie’s produce to maximize profits.?

Chapter 6:Activity and Process Decisions

1. Each of the following should result in reduction in the level of work-in-process inventory and cycle time, EXCEPT:
a. / Quality improvement programs.
b. / Corporate downsizing programs.
c. / Just-in-time programs.
d. / Cellular manufacturing.
2. Which of the following is NOT one of the four cost of quality categories?
a. / Appraisal costs
b. / Internal failure costs
c. / Prevention costs
d. / Benchmarking costs
3. Each of the following should be considered in the make-or-buy decision, EXCEPT:
a. / Unavoidable facility-sustaining costs
b. / The costs to produce the product
c. / The cost to purchase the product outside the firm
d. / The general implications for the firm to buy the product from another firm (e.g., sustainability of outside price, quality of outside product, etc.)
4. The cost of which of the following is an example of an appraisal cost in the cost of quality framework?
a. / Inspection of batches of products
b. / Supplier certification
c. / Product liability lawsuits
d. / Warranty claims
5. In ______, equipment is organized to accommodate the production of a specific product.
a. / A process layout
b. / A product layout
c. / Cellular manufacturing
d. / Just-in-Time Production
6. Shields Company has the capacity to produce 5,000 units of product H199. Currently it is producing 3,900 units. Foster Company asks Shield to produce 800 more units of H199 for a special order. Neither new machinery nor extra plant space is needed for the special order. Which of the following statements is true?
a. / Only product-sustaining costs will increase.
b. / Only facility-sustaining costs will increase.
c. / Both product-sustaining and facility –sustaining costs will increase.
d. / Neither product-sustaining nor facility-sustaining costs will increase.
7. The theory of constraints
a. / Emphasizes long-term optimization
b. / Maintains that maximizing volume through production bottlenecks will increase operating income
c. / Helps managers make special one-time decisions
d. / Suggests that some component parts should be outsourced
8. All of the following statements about just-in-time (JIT) are true, EXCEPT:
a. / Processing time decreases
b. / It simplifies accounting
c. / It reduces the amount of money invested in inventory
d. / JIT processing systems must be reliable

9.Gumby Company is determining whether to outsource product Pokey. An outside bidder has quoted a price of $52. The following costs of the product when produced in-house are shown below on a per-unit basis:

Pokey

Direct materials / $13.95
Direct labor / 15.00
Unit-related overhead / 17.80
Batch-related overhead / 6.55
Product-sustaining overhead / 3.25
Facility-sustaining overhead / 8.35
TOTAL / $64.90

a.)Which support costs will not be incurred if Pokey is outsourced?

b.)Suppose that unit-related, batch-related and product-sustaining costs can be eliminated if Pokey is outsourced. However, the machinery, factory space, and other facility-related costs will still be incurred if Pokey is outsourced. Should Gumby outsource Pokey?

10.Eastco purchased a stamping machine four months ago and now realizes that a much better machine is available on the market. The following information pertains to both machines.

OLD / NEW
Acquisition cost / $150,000 / $200,000
Remaining Life / 3 years / 3 years
Current disposal value / $60,000 / -
Salvage value at the end of 3 years / $6,000 / $9,000
Annual operating costs / $60,000 / $12,000

The estimates above do not include rework costs. The new stamping machine also will reduce the defect rate from 4% to 2%. All defective units are reworked at a cost of $1.25 per unit. Eastco produces 150,000 units annually.

  1. What costs are considered sunk?
  1. Should Eastco replace the old machine?

NET BENEFITS OVER 3 YEARSNEW – OLD

11. Jerry’s 5-year-old Chevy Geo Prism requires repairs estimated at $3,000 to make it roadworthy again. His friend, Elaine, suggested that he should buy a 5-year-old Honda Civic instead for $3000 cash. Elaine estimated the following costs for the two cars:

Chevy Geo Prism Honda Civic

Acquisition cost$15,000$3,000

Repairs$ 3,000 ---

Annual operating costs

(Gas, maintenance, insurance)$ 2,280$2,100

  1. What costs are NOT relevant for this decision?
  1. What should Jerry do? What is his savings in the first year?
Chapter 11: Budgeting
1. ______bases a period’s expenditure level for a discretionary item on the amount spent on that item during the previous period
a. / Zero-based budgeting
b. / Periodic budgeting
c. / Incremental budgeting
d. / Continuous budgeting
2. Operating budgets include all of the following, EXCEPT:
a. / Sales plan
b. / Purchasing plan
c. / Production plan
d. / Cash flow plan
3. A demand forecast is
a. / An estimate of sales demand given a product price
b. / Developed largely because of customer dissatisfaction
c. / An estimate of market demand given the amount sold the previous year
d. / An estimate for the demand for labor
4. Financial budgets include all of the following except a:
a. / Projected balance sheet
b. / Production plan
c. / Cash flow plan
d. / Projected income statement
5. When discussing the roles of budgets, a control role includes?
a. / Identify organizational objectives and short-term goals
b. / Developing long-term strategies and short-term plans
c. / Measuring and assessing performance against budgeted amounts
d. / Developing the master budget.
6. Financial budgets are prepared
a. / To specify expectation for selling, purchasing, and production
b. / To evaluate financial results of the proposed decisions
c. / So that financial statements can be prepared for shareholders
d. / To plan for production capacity
7. Although planners update or revise the budgets during the period, ______is typically performed once per year
a. / Zero-based budgeting
b. / Periodic budgeting
c. / Incremental budgeting
d. / Continuous budgeting

8. The finished goods production budget determines

a. / The units to be produced during a period
b. / Budgeted sales dollars
c. / The predetermined factory overhead rate
d. / The amount of labor hours worked

9. Direct material purchases equal

a. / Usage plus production needs
b. / Production needs plus target ending finished goods inventory
c. / Beginning inventories plus production needs
d. / Usage plus target ending inventories less beginning inventories

10. ______occur(s) when subordinates ask for excess resources above and beyond what they need to accomplish budget objectives

a. / Pseudo participation
b. / Effective budgeting
c. / Budget slack
d. / Participative budgeting

11.Amigo Corporation developed the following sales budget:

Month / Sales
July / $ 30,000
August / 34,000
September / 38,000
October / 42,000
November / 48,000
December / 60,000

Cash is collected from customers in the following manner

Month of sale30%

Month following sale50%

Two months following sale15%

Amount uncollectible 5%

Prepare a summary of cash collections for the 4th quarter.

12.The Mahoney Company has prepared a sales budget of 24,000 units for a 3-month period starting from January 1. The company has an inventory of 11,000 units of finished goods on hand at December 31 and has a target finished goods inventory of 13,000 units at the end of the succeeding quarter.

It takes 5 gallons of direct materials to make 1 unit of finished product. The company has an inventory of 110,000 gallons of direct materials at December 31 and has a target ending inventory of 100,000 gallons.

How many gallons of direct materials should be purchased during the 3 months ending March 31?

FG (Units)
Budgeted sales / 24,000
Add target ending FG inventory / 13,000
Total requirements / 37,000
Deduct beginning FG inventory / 11,000
Units to be produced / 26,000
DM (Gallons)
DM needed for production (26,000 x 5) / 130,000
Add target ending DM inventory / 100,000
Total requirements / 230,000
Deduct beginning DM inventory / 110,000
DM to be purchased / 120,000
Chapter 12: Variance Analysis

1. Madzinga’s Draperies manufactures curtains. Each window requires the following:

Direct materials, standards10 square yards at $5 per yard

Direct labor, standards5 hours at $10 per hour

During the second quarter, the company made 1,500 curtains and used 14,000 square yards of fabric costing $68,600. Direct labor totaled 7,600 hours for $79,800.

  1. Compute the direct materials price and efficiency variances for the quarter.
  1. Compute the direct labor price and efficiency variances for the quarter.

2. Robb Industries Inc. (RII) developed standard costs for direct material and direct labor. In 2004, RII estimated the following standard costs for one of their major products, the 10-gallon plastic container.

Budgeted quantityBudgeted price

Direct materials0.10 pounds$30 per pound

Direct labor0.05 hours$15 per hour

During June RII produced and sold 5,000 containers using 490 pounds of direct materials at an average cost per pound of $32 and 250 direct manufacturing labor-hours at an average wage of $15.25 per hour.

  1. Calculate the direct materials price and usage variances for June.
  1. Calculate the direct labor rate and efficiency variances for June.

1