To Reset Elevator From Fire Service

To Reset Elevator from Fire Service

10/04/05

Caused when hall station alarm is pulled or there is a fire service drill. To “fix” need to:

1. Go to main fire service panel

2. Reset

3. Go to the elevator, insert fire service key, turn to “On”, turn to “Off”, then to “Bypass”, then back to “Off” (go thru these steps slowly)

4. Elevator should now be reset.

5. If not repeat steps in #3 one more time, (slowly).

If this doesn’t work call me at 548-8081 or Cell #459-0558

These steps were provided by Mike Burke, Elevator Technician with Thyssen-Krupp Elevators.

Prepared by Daniel G. Cantu, Energy Manager/Supervisor