Tribology Research References Quarterly Update- Vol.2, Sept., 2009
S.No. / Journal1 / Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
a) Volume 223, Number 4 / 2009
b) Volume 223, Number 5/ 2009
c) Volume 223, Number 6 / 2009
2. / Tribology International
a) Volume 42, Issue 7 (July 2009)
b) Volume 42, Issue 8 (August 2009)
c) Volume 42, Issue 9 (September 2009) Special Issue: Fifth International Symposium on Fretting Fatigue
3. / Tribology Letters
a) Volume 35, Number 1(July, 2009)
b) Volume 35, Number 2 (August, 2009)
c) Volume 35, Number 3 (September, 2009)
4. / Tribology Transactions
a) Volume 52 Issue 5 2009
b) Volume 52 Issue 6 2009
5. / Wear
a) Volume 267, Issues 1-4 (15 June 2009)
b) Volume 267, Issues 5-8 (15 June2009)
c) Volume 267, Issues 9-10 (9 September 2009)
6. / Journal Lubrication Science
a) Volume 21 Issue 5, May 2009
b) Volume 21 Issue 6,June 2009
c) Volume 21 Issue 7, August 2009
7. / Journal of Tribology
a) Volume 131, Number 3, July 2009
b) Volume 131, Number 4, October 2009
8. / Indian Journal of Tribology
a) Volume 4 • Number 2 • July- December 2009
1. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Index
/Volume 223, Number 4 / 2009
1 / A thermohydrodynamic analysis of a lubrication film between rough seal faces by Z Luan and M M Khonsari
2 / Book Review by Professor T Lubrecht
3 / Determination of the sampling interval in surface roughness measurements with implications to engineering tribo-surface characterization and evaluation by L Chang
4 / Effect of surface dents on contact pressure in elastohydrodynamic contacts by I Křupka, M Vrbka, M Vaverka, R Poliščuk and M Hartl
5 / Impact corrosion wear properties and mechanism of lining board steels by X-D Du, X-J Yang, Y-F Wang and L Wang
6 / Load capacity of aerodynamic foil thrust bearings supported by viscoelastic material, by K Somaya, S Yoshimoto and M Miyatake
7 / Performance analysis of rotating externally pressurized air bearings by Z-S Liu, G-H Zhang and H-J Xu
8 / Preparation and tribological behaviour of multiply-alkylated cyclopentane-1H, 1H, 2H, 2H-perfluorodecyltrichlorosilane dual-layer film on diamond-like carbon by J Q Ma, Y F Mo and M Bai
9 / Preparation and tribological properties of WS2 nanoparticles modified by trioctylamine by J F Wu, W S Zhai and G F Jie
10 / Rheology and high-pressure models for quantitative elastohydrodynamics by S Bair
11 / The surface magnetization approach on assessing tribological properties of steels with different TiN coatings by Y-P Chang, Y-Y Hung, L-M Chu, J-P Yur and C-H Lin
12 / Theoretical and experimental evaluation of engine bearing performance by R A Mufti and M Priest
13 / Tribological properties and worn surface analysis generated by ashless and phosphorus-free additive in water-based lubricant by H Ma, T Ren, Y Zhao, L Zheng, C Ma and Y Han
14 / Ultrasonic polishing of giant magnetic resistance magnetic recording heads for hard discs by R-L Shen, J Zhong
Volume 223, Number 5 / 2009
1 / Special Issue On Tribology Research In Austria by E Badisch, M Kirchgaßner and F Franek
2 / Self-lubricating chromium carbide/amorphous hydrogenated carbon nanocomposite coatings: a new alternative to tungsten carbide/amorphous hydrogenated carbon by C Mitterer, M Lechthaler, G Gassner, G A Fontalvo, L Tóth, B Pécz, M Raible, K Maier
3 / Development of an atomic force microscope closed fluid cell for tribological investigations of large samples in chemically aggressive environments by I C Gebeshuber, D Holzer, R Goschke, F Aumayr and H Störi
¬Back
S.No. / Index4 / Combined finite element–boundary element method modelling of elastic multi-asperity contacts by S Ilincic, G Vorlaufer, P A Fotiu, A Vernes and F Franek
5 / Fundamentals of optimizing aluminium-based journal bearing materials by F Grün, I Gódor and W Eichlseder
6 / Surface analysis on rolling bearings after exposure to defined electric stress by T Zika, I C Gebeshuber, F Buschbeck, G Preisinger and M Gröschl
7 / Comparison of parametric and profilometric surface analysis methods on machined surfaces by J Böhm, M Jech, G Vorlaufer and M Vellekoop
8 / Experimental definition of a failure model for the tribological behaviour of polytetrafluoroethylene bronze compounds by I Gódor, Z Major, Sz Vezér and F Grün
9 / Characterization of lubricants for metal forming by means of an oscillating tribo-test-rig by C Monetti, S Ilo and T Lebersorger
Volume 223, Number 6 / 2009
1 / Tribochemistry, tribocatalysis, and the negative-ion-radical action mechanism by C Kajdas and K Hiratsuka
2 / Statistical numerical modelling of sub-surface initiated spalling in bearing contacts by N Raje and F Sadeghi
3 / Effects of friction on tribo-magnetization mechanisms for self-mated iron pairs under dry friction condition by Y-P Chang, J-P Yur, L-M Chu, H-M Chou and Y-C Hwang
4 / Friction and outwearing of ceramic coatings formed by the microarc oxidation method by V N Malyshev
5 / Oxidation and tribo-oxidation of an alloy steel H13 at elevated temperature by F Wang, X H Cui, Z R Yang, M X Wei and S Q Wang
6 / The sliding friction and wear properties of poly(vinylidene fluoride) composites filled with carbon fibres by L Jian
7 / Dynamic characteristics of grooved air bearings in microsystems by L-M Chu, W-L Li, R-W Shen and T-I Tsai
8 / Fractal analysis of vibration signals for monitoring the condition of milling tool wear by Xu Chuangwen and C Hualing
9 / Study on design optimization of a crankshaft bearing considering crankshaft strength for an internal combustion engine by J Sun, Y Fu, M Deng, X Cai and C Gui
10 / Efficiency of injection-moulded polymer composite spur gears by S Senthilvelan and R Gnanamoorthy
11 / Predictive modelling of surface roughness and tool wear in solid lubricant assisted turning of AISI 1040 steel by P Vamsi Krishna, D N Rao and R R Srikant
¬Back
2. Tribology International
S.No. / IndexVolume 42, Issue 7 (July 2009)
1 / Which hardness (nano or macrohardness) should be evaluated in cavitation? by C. Godoy , R.D. Mancosu, R.R. Machado, P.J. Modenesi and J.C. Avelar-Batista
2 / Performance and anti-wear mechanism of CaCO3 nanoparticles as a green additive in poly-alpha-olefin by Ming Zhang, Xiaobo Wang, Xisheng Fu, Yanqiu Xia
3 / Experimental studies of pressure distributions in finite slider bearing with single continuous surface profiles on the pads by R.K. Sharma, R.K. Pandey
4 / Performance of abrasive wear of WC-12Co coatings sprayed by HVOF by Q. Wang, Z.H. Chen, Z.X. Ding
5 / Numerical analysis of non-Newtonian TEHL line contact problem based on real-coded genetic algorithm
by M. Qiu, J. Lu, Y. Yin
6 / Study on the tribological behavior of hybrid PTFE/cotton fabric composites filled with Sb2O3 and melamine cyanurate by Hui-juan Zhang, Zhao-zhu Zhang, Fang Guo, Wei Jiang, Wei-min Liu
7 / Mechanical properties of the alloy Ti–6Al–4V irradiated with swift Kr ion by P. Budzynski, V.A. Skuratov, T. Kochanski
8 / Neural network prediction of disc brake performance by Dragan Aleksendrić, David C. Barton
9 / Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution
Pages 1081-1087
Qinling Bi, Weimin Liu, Jiqiang Ma, Jun Yang, Yuping Pu, Qunji Xue
10 / Theoretical investigations on the performance of an externally adjustable fluid-film bearing including misalignment and turbulence effects by Satish B. Shenoy, R. Pai
11 / Influence of an additional elastic stress on dry wear behaviour in reciprocating tests by M. Buciumeanu, I. Crudu, L. Palaghian, A.S. Miranda, F.S. Silva
12 / CFD investigation of pressure depressions in aerostatic circular thrust bearings by Mohamed E. Eleshaky
13 / Preliminary investigation of the effect of dimple size on friction in line contacts by Xiaolei Wang, Wei Liu, Fei Zhou, Di Zhu
Volume 42, Issue 8 (August 2009)
1. / Effect of environment humidity and temperature on stationary and transient flying responses of air bearing slider by Wei Hua, Weidong Zhou, Bo Liu, Shengkai Yu, Chee How Wong
2. / Sampling effect on contact and transport properties between fractal surfaces by C. Vallet, D. Lasseux, H. Zahouani, P. Sainsot
¬Back
3. / Study on development of polyamide gears for improvement of load-carrying capacity by Hayrettin Düzcükoğlu
4. / Inverse approach for calculating temperature in EHL of line contacts by Li-Ming Chu, Hsiang-Chen Hsu, Jaw-Ren Lin, Yuh-Ping Chang
5. / A mixed EHL model with asymmetric integrated control volume discretization by S. Li, A. Kahraman
6. / Hydrodynamic effects of macroscopic deterministic surface structures in cold forging processes by Peter Groche, Jörg Stahlmann, Jürgen Hartel, Michael Köhler
7. / Optimum design of externally pressurized air bearing using Cluster OpenMP by Nenzi Wang, Chih-Ming Tsai, Kuo-Chiang Cha
8. / Thermo-hydrodynamic performance of grooved oil journal bearing by L. Roy
9. / Friction of PM ferritic stainless steels at temperatures up to 300°C by F. Velasco, M.A. Martínez, R. Calabrés, A. Bautista, J. Abenojar
10. / Influence of orifices on stability of rotor-aerostatic bearing system by Ding-Wen Yang, Cheng-Hsien Chen, Yuan Kang, Ren-Ming Hwang, Shyh-Shyong Shyr
11. / Synthesis of TiB2-reinforced iron-based composite coating by S.O. Yilmaz, M. Ozenbas, M. Yaz
12. / Wear behavior of Al–Mg–Cu–based composites containing SiC particles by Adel Mahamood Hassan, Abdalla Alrashdan, Mohammed T. Hayajneh, Ahmad Turki Mayyas
Volume 42, Issue 9 (September 2009)-Special Issue : Fifth International Symposium on Fretting Fatigue
Mechanics and Mechinisms of Fretting Damage
1. / Radial nanofretting behavior of four typical structural materials in MEMS under high loads by Linmao Qian, Jingyi Zhang, Zhongrong Zhou
2. / The effects of laser peening and shot peening on fretting fatigue in Ti–6Al–4V coupons by Kevin K. Liu, Michael R. Hill
3. / On the thermal origin of the antagonistic and synergistic effects of fretting and crevice corrosion processes in multi-phase flow environment by Helmi Attia
4. / Numerical modelling of crack–contact interaction in 2D incomplete fretting contacts using X-FEM by E. Giner, M. Tur, A. Vercher, F.J. Fuenmayor
Modeling and Design Consideration of Fretting Fatigue
5. / Mixed high low fretting fatigue of Ti6Al4V: Tests and modelling by J.A. Araújo, D. Nowell
6. / Microstructure sensitivity of fretting fatigue based on computational crystal plasticity by M. Zhang, D.L. McDowell, R.W. Neu
7. / A fatigue endurance criterion in two stages with application to fretting contact by F.C. Castro, J.A. Araújo, E.N. Mamiya, N. Zouain
¬Back
S.No. / Index8. / Life estimation of Ti–6Al–4V specimens subjected to fretting fatigue and effect of surface treatments by H. Murthy, G. Mseis, T.N. Farris
Fretting Fatigue Testing
9. / What features are needed in a fretting fatigue test? By D.A. Hills, D. Nowell
10. / Fretting fatigue of laser shock peened Ti–6Al–4V by S. Srinivasan, D.B. Garcia, M.C. Gean, H. Murthy, T.N. Farris
11. / Utility of a fretting device working under free displacement by G.R. Yantio Njankeu Sabeya, J.-Y. Paris, J. Denape
12. / Elevated temperature fretting fatigue of Ti-17 with surface treatments by M.C. Gean, T.N. Farris
Effect of Environment on Fretting Fatigue
13. / Effects of humidity and contact material on fretting fatigue behavior of an extruded AZ61 magnesium alloy by Anchalee Saengsai, Yukio Miyashita, Yoshiharu Mutoh
14. / The effect of hydrogen gas environment on fretting fatigue strength of materials used for hydrogen utilization machines by Masanobu Kubota, Yasuhiro Tanaka, Yoshiyuki Kondo
Fretting Fatigue in Bio-Technology
15. / Fretting in prosthetic devices related to human bodyby M.H. Zhu, Z.B. Cai, W. Li, H.Y. Yu, Z.R. Zhou
16. / Dual-motion fretting behavior of mandibular cortical bone against pure titanium by H.Y. Yu, S.S. Gao, Z.B. Cai, H.X. Quan, M.H. Zhu
17. / Fretting wear behavior of nitrogen ion implanted titanium alloys in bovine serum lubrication by Yong Luo, Shirong Ge
Fretting Wear, Applications and Case Studies
18. / A generalized fretting wear theory by Helmi Attia
19. / The effect of rubber contact on the fretting fatigue strength of railway wheel tire by Masanobu Kubota, Kenji Hirakawa
20. / Research on the fretting wear behavior of silicon wafers before and after carbon ions implantation
by Zhang De-kun, Ge Shi-rong, Wang Qing-liang
¬Back
3. Tribology Letters
S.No. / IndexVolume 35, Number 1(July, 2009)
1 / Experimental Considerations when Characterizing Materials Friction with Atomic Force Microscopy by F. T. Limpoco, Joelle M. Payne and Scott S. Perry
2 / A New Method to Determine Adhesion of Cantilever Beams Using Beam Height Experimental Data by Kendall M. Hurst, Christopher B. Roberts and W. Robert
3 / Addressing Practical Challenges of Low Friction Coefficient Measurements by D. L. Burris and W. G. Sawyer
4 / The Rheological Behavior of the Nano-Meter Film of Non-Functional PFPE on Hard Disk Surfaces during Spin-Off by B. Zhang, H. Chiba and A. Nakajima
5 / Reactivity of Triphenyl Phosphorothionate in Lubricant Oil Solution by Filippo Mangolini, Antonella Rossi and Nicholas D. Spencer
6 / Friction Characteristics and Topography of Tribofilms from Anti-Wear Additives Applied to Metal V-Belt Type CVT Fluids by K. Narita and M. Priest
7 / Film-forming Characteristics of Grease in Point Contact under Swaying Motions by Gang Li, Chenhui Zhang, Jianbin Luo, Shuhai Liu, Guoxin Xie and Xinchun Lu
8 / Effects of Surface Roughening on Asperity Flattening by Sy-Wei Lo, Tze-Chun Yang, Zong-Ming Shih and Sue-Chi Lin
Volume 35, Number 2(August, 2009)
1 / Boundary Lubrication in Natural Articular Joints by Rowena Crockett
2 / Friction and Wear Behavior of Ultra-High Molecular Weight Polyethylene Sliding Against GCr15 Steel and Electroless Ni–P Alloy Coating Under the Lubrication of Seawater by Jianzhang Wang, Fengyuan Yan and Qunji Xue
3 / Thermal-Induced Wear Mechanisms of Sheet Nacre in Dry Friction by Philippe Stempflé, Toufik Djilali, Richard Kouitat Njiwa, Marthe Rousseau, Evelyne Lopez and Xavier Bourrat
4 / Temperature Effect on a HDD Slider’s Flying Performance at Steady State by Nan Liu and David B. Bogy
5 / Air Bearing Design to Prevent Reverse Flow from the Trailing Edge of the Slider by Jianhua Li, Junguo Xu and Yuichi Aoki
6 / Air-Bearing Shear Force in the Head–Disk Interface of Hard Disk by Nan Liu and David B. Bogy
7 / Understanding the Role of Nanoparticles in Nano-oil Lubrication by Kwangho Lee, Yujin Hwang, Seongir Cheong, Youngmin Choi, Laeun Kwon, Jaekeun Lee and Soo Hyung Kim
8 / Tribological Properties of Patterned NiFe-Covered Si Surfaces by Miki Nakano, Koji Miyake, Atsushi Korenaga, Shinya Sasaki and Yasuhisa Ando
¬Back