I nstall ation SprutCAM for network license ( network and local version ) .

1. Software lock type

2. D ongle type

1. Software lock type

The procedure described above, but the dongle is not needed.

2 . D ongle type :

To install the server's and user's parts for floating license for USB key you can find detailed instruction below:

***************************

AT SERVER PC:

1) Upgrade dongle: send DAT/HL/GSD/GS3/MTX/SLK file. We will provide upgrade file.

2) Inform what and how many licenses are needed.

This will be added to the license file 'Sprut_Server.license' for server and to the license file(s) ‘STRegister8.stj’(SprutCAM8) ‘STRegister9.stj’(SprutCAM9) for each type configuration (for one type configuration this file the same for all).

3) Need to install from our server and start server license utility with file license

For 32 bit

download.sprutcam.com/SprutCAM_dealers/NetLockServer/Version_7

utcam.com/download/netlockserver/NetLockServer3_X86.exe

For 64 bit

utcam.com/download/netlockserver/NetLockServer3_X64.exe

Set path to license file 'Sprut_Server.license' (from item 2) during the installation.

By default (in the 'STNetLock2.ini' file) uses Port 10100.

Stnetlock2.ini is placed in the "%AllUsersProfile%\Sprut Technology\LicenceServer" folder.

If this port is busy then need to change to free 10200, or any other, the same port value should be set in the User PC for SprutCAM in 'StNLC.ini' file also.

Note: You can do a preliminary translation using LNG file from STNetLockServer\Languages\STNetLockSever.Lng

***************************

AT USER'S PC:

1) Need to install SprutCAM for net lock server:

a) To install you will need copy next files on user's PC into one folder:

..

STRegister8(9).stj - The license file for client PC;

SprutCAM8(9).exe - distributive file of SprutCAM that available:

utcam.com/download/sprutcam/version-8/SCsetup.exe

And start the "SCsetup.exe" file.

b) After installing SprutCAM it is necessary to define the location of the server by name or IP address in 'stNLC.ini' file that available in "Disk:\Program Files\Sprut Technology\SprutCAM 9\" folder

For example:

HostName=SERVER_NAME

;HostAddress=192.168.0.1

Or

HostName=localhost

if server’s PC on user’s PC (without network)

Or if you have the host adress (IP adress of server with license file) you no need the server name for HostName.

In this case example will:

;HostName=SERVER_NAME

HostAddress=192.168.0.1

Or

HostAddress=127.0.0.1

if server’s PC on user’s PC (without network)

The symbol ';' disable the line.

The "server name" OR "host address" should be changed every time when the license file is moved on another PC that will be server.

Also if port in the 'STNetLock2.ini' file above has been changed, in 'StNLC.ini' file should be set the same port value also.

c) To run SprutCAM.exe