Page 1 of 3
Title / Perform glass container packaging process operations
Level / 3 / Credits / 28
Purpose / People credited with this unit standard are able to: perform glass container packaging process operations in a glass container packaging area.
Classification / Glass and Glazing > Glass Container Manufacturing
Available grade / Achieved
Entry information
Recommended skills and knowledge / Unit 23062, Demonstrate knowledge of glass container manufacturing finished products operation, or demonstrate equivalent knowledge and skills.
Explanatory notes
Definitions
Enterprise means an organisation where training and/or assessment is taking place, and/or where the trainee is employed.
Enterprise procedures refer to the documented procedures used by the organisation carrying out the work and applicable to the tasks being carried out. They may include but are not limited to – standard operating procedures, site safety procedures, equipment operating procedures, codes of practice, quality assurance procedures, housekeeping standards, charging of time and materials, management of drawings and documentation, procedures to comply with legislative and local body requirements.
Outcomes and evidence requirements
Outcome 1
Perform glass container packaging process operations.
Evidence requirements
1.1The potential hazards in the glass container packaging area are identified, and precautions are taken in accordance with enterprise procedures.
1.2Emergency stopping of packaging equipment is demonstrated in accordance with enterprise procedures.
Rangeequipment includes but is not limited to – palletiser, bar coder, shuttle car, shrink wrapper, pallet ticketer, layer seal.
Evidence may be simulated if required.
1.3Equipment in the glass container packaging area is operated, and identified issues are reported or responded to in accordance with enterprise procedures.
Rangeequipment – palletiser, bar coder, shuttle car, shrink wrapper, pallet ticketer, layer seal.
1.4Supply of packaging materials is maintained to support production output in accordance with enterprise procedures.
1.5Process alarms are identified and action is taken in response to alarms in accordance with enterprise procedures.
1.6Work area and hand tools are cleared and cleaned to ensure safe operating conditions in accordance with enterprise procedures.
Rangework area may include but is not limited to – floors, stairs, platforms, machine surfaces.
Replacement information / This unit standard and unit standard 28571 replaced 18772.Planned review date / 31 December 2019
Status information and last date for assessment for superseded versions
Process / Version / Date / Last Date for AssessmentRegistration / 1 / 16 April 2015 / N/A
Review / 2 / 19 November 2015 / N/A
Consent and Moderation Requirements (CMR) reference / 0134
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact Competenz at if you wish to suggest changes to the content of this unit standard.
SSB Code 101571 / New Zealand Qualifications Authority 2019