Page 4 of 4
Title / Perform quality control on a glass container production line
Level / 4 / Credits / 30
Purpose / People credited with this unit standard are able to: perform analytical tests on glass containers; audit and re-sort glass container production; and issue production line quality control requirements.
Classification / Glass and Glazing > Glass Container Manufacturing
Available grade / Achieved
Entry information
Recommended skills and knowledge / Unit 28570, Perform glass container packaging process operations; Unit 28571 Maintain glass container packing continuity; and Unit4435, Select, use, and care for engineering dimensional measuring equipment; or demonstrate equivalent knowledge and skills.
Explanatory notes
Definition
Enterprise procedures refer to the documented procedures used by the organisation carrying out the work and applicable to the tasks being carried out. They may include but are not limited to – standard operating procedures, site safety procedures, equipment operating procedures, codes of practice, quality assurance procedures, housekeeping standards, charging of time and materials, management of drawings and documentation, procedures to comply with legislative and local body requirements.
Outcomes and evidence requirements
Outcome 1
Perform analytical tests on glass containers.
Evidence requirements
1.1 The potential hazards of glass container analytical testing are identified, and precautions are taken in accordance with enterprise procedures.
Range analytical tests include but are not limited to – capacity, container dimensions, thermal shock, impact, vertical load.
1.2 Glass container samples and equipment are prepared for analytical testing in accordance with enterprise procedures.
Range analytical tests include but are not limited to – capacity, container dimensions, thermal shock, impact, vertical load.
1.3 Glass container samples are tested in accordance with enterprise procedures.
Range analytical tests include but are not limited to – capacity, container dimensions, thermal shock, impact, vertical load.
1.4 Analytical test results are recorded and reported in accordance with enterprise procedures.
Range analytical tests include but are not limited to – capacity, container dimensions, thermal shock, impact, vertical load.
1.5 Glass ring samples are cut and dispatched for laboratory testing in accordance with enterprise procedures.
Outcome 2
Audit and re-sort quarantined glass container production.
Evidence requirements
2.1 Re-sorting of quarantined production is performed in accordance with enterprise procedures.
Range automatic sorting, manual sorting.
2.2 Auditing and re-sorting documentation is completed in accordance with enterprise procedures.
Outcome 3
Issue production line quality control requirements.
Evidence requirements
3.1 Product master specification including historical information is selected according to job change and issued to production line staff in accordance with enterprise procedures.
3.2 Product specification requirements are interpreted and measurement equipment selected, calibrated, and set up in accordance with enterprise procedures.
3.3 Production line documentation is completed in accordance with enterprise procedures.
Planned review date / 31 December 2019Status information and last date for assessment for superseded versions
Process / Version / Date / Last Date for Assessment /Registration / 1 / 18 December 2001 / 31 December 2015
Revision / 2 / 13 February 2004 / 31 December 2015
Revision / 3 / 20 September 2004 / 31 December 2015
Review / 4 / 20 November 2006 / 31 December 2017
Review / 5 / 16 April 2015 / N/A
Consent and Moderation Requirements (CMR) reference / 0134
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMRs). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Comments on this unit standard
Please contact Competenz if you wish to suggest
changes to the content of this unit standard.
SSB Code 101571 / Ó New Zealand Qualifications Authority 2015